Disk and Washer Methods

Learning Outcomes

  • Find the volume of a solid of revolution using the disk method
  • Find the volume of a solid of revolution with a cavity using the washer method

The Disk Method

When we use the slicing method with solids of revolution, it is often called the disk method because, for solids of revolution, the slices used to over approximate the volume of the solid are disks. To see this, consider the solid of revolution generated by revolving the region between the graph of the function [latex]f(x)={(x-1)}^{2}+1[/latex] and the [latex]x\text{-axis}[/latex] over the interval [latex]\left[-1,3\right][/latex] around the [latex]x\text{-axis}\text{.}[/latex] The graph of the function and a representative disk are shown in Figure 9(a) and (b). The region of revolution and the resulting solid are shown in Figure 9(c) and (d).

This figure has four graphs. The first graph, labeled “a” is a parabola f(x)=(x-1)^2+1. The curve is above the x-axis and intersects the y-axis at y=2. Under the curve in the first quadrant is a vertical rectangle starting at the x-axis and stopping at the curve. The second graph, labeled “b” is the same parabola as in the first graph. The rectangle under the parabola from the first graph has been rotated around the x-axis forming a solid disk. The third graph labeled “c” is the same parabola as the first graph. There is a shaded region bounded above by the parabola, to the left by the line x=-1 and to the right by the line x=3, and below by the x-axis. The fourth graph labeled “d” is the same parabola as the first graph. The region from the third graph has been revolved around the x-axis to form a solid.

Figure 9. (a) A thin rectangle for approximating the area under a curve. (b) A representative disk formed by revolving the rectangle about the [latex]x\text{-axis}\text{.}[/latex] (c) The region under the curve is revolved about the [latex]x\text{-axis},[/latex] resulting in (d) the solid of revolution.

We already used the formal Riemann sum development of the volume formula when we developed the slicing method. We know that

[latex]V={\displaystyle\int }_{a}^{b}A(x)dx[/latex]

 

The only difference with the disk method is that we know the formula for the cross-sectional area ahead of time; it is the area of a circle. This gives the following rule.

The Disk Method

Let [latex]f(x)[/latex] be continuous and nonnegative. Define [latex]R[/latex] as the region bounded above by the graph of [latex]f(x),[/latex] below by the [latex]x\text{-axis,}[/latex] on the left by the line [latex]x=a,[/latex] and on the right by the line [latex]x=b.[/latex] Then, the volume of the solid of revolution formed by revolving [latex]R[/latex] around the [latex]x\text{-axis}[/latex] is given by

[latex]V={\displaystyle\int }_{a}^{b}\pi {\left[f(x)\right]}^{2}dx.[/latex]

The volume of the solid we have been studying (Figure 9) is given by

[latex]\begin{array}{cc}\hfill V& ={\displaystyle\int }_{a}^{b}\pi {\left[f(x)\right]}^{2}dx\hfill \\ & ={\displaystyle\int }_{-1}^{3}\pi {\left[{(x-1)}^{2}+1\right]}^{2}dx=\pi {\displaystyle\int }_{-1}^{3}{\left[{(x-1)}^{4}+2{(x-1)}^{2}+1\right]}^{2}dx\hfill \\ & =\pi {\left[\frac{1}{5}{(x-1)}^{5}+\frac{2}{3}{(x-1)}^{3}+x\right]|}_{-1}^{3}=\pi \left[(\frac{32}{5}+\frac{16}{3}+3)-(-\frac{32}{5}-\frac{16}{3}-1)\right]=\frac{412\pi }{15}{\text{units}}^{3}.\hfill \end{array}[/latex]

 

Let’s look at some examples.

Example: Using the Disk Method to Find the Volume of a Solid of Revolution 1

Use the disk method to find the volume of the solid of revolution generated by rotating the region between the graph of [latex]f(x)=\sqrt{x}[/latex] and the [latex]x\text{-axis}[/latex] over the interval [latex]\left[1,4\right][/latex] around the [latex]x\text{-axis}\text{.}[/latex]

Try It

Use the disk method to find the volume of the solid of revolution generated by rotating the region between the graph of [latex]f(x)=\sqrt{4-x}[/latex] and the [latex]x\text{-axis}[/latex] over the interval [latex]\left[0,4\right][/latex] around the [latex]x\text{-axis}\text{.}[/latex]

Watch the following video to see the worked solution to the above Try It.

So far, our examples have all concerned regions revolved around the [latex]x\text{-axis,}[/latex] but we can generate a solid of revolution by revolving a plane region around any horizontal or vertical line. In the next example, we look at a solid of revolution that has been generated by revolving a region around the [latex]y\text{-axis}\text{.}[/latex] The mechanics of the disk method are nearly the same as when the [latex]x\text{-axis}[/latex] is the axis of revolution, but we express the function in terms of [latex]y[/latex] and we integrate with respect to [latex]y[/latex] as well. This is summarized in the following rule.

The Disk Method for Solids of Revolution around the [latex]y[/latex]-axis

Let [latex]g(y)[/latex] be continuous and nonnegative. Define [latex]Q[/latex] as the region bounded on the right by the graph of [latex]g(y),[/latex] on the left by the [latex]y\text{-axis,}[/latex] below by the line [latex]y=c,[/latex] and above by the line [latex]y=d.[/latex] Then, the volume of the solid of revolution formed by revolving [latex]Q[/latex] around the [latex]y\text{-axis}[/latex] is given by

[latex]V={\displaystyle\int }_{c}^{d}\pi {\left[g(y)\right]}^{2}dy.[/latex]

 

The next example shows how this rule works in practice.

example: Using the Disk Method to Find the Volume of a Solid of Revolution 2

Let [latex]R[/latex] be the region bounded by the graph of [latex]g(y)=\sqrt{4-y}[/latex] and the [latex]y\text{-axis}[/latex] over the [latex]y\text{-axis}[/latex] interval [latex]\left[0,4\right].[/latex] Use the disk method to find the volume of the solid of revolution generated by rotating [latex]R[/latex] around the [latex]y\text{-axis}\text{.}[/latex]

Figure 11 shows the function and a representative disk that can be used to estimate the volume. Notice that since we are revolving the function around the [latex]y\text{-axis,}[/latex] the disks are horizontal, rather than vertical.

This figure has two graphs. The first graph labeled “a” is the curve g(y) = squareroot(4-y). It is a decreasing curve starting on the y-axis at y=4. Between the curve and the y-axis is a horizontal rectangle. The rectangle starts at the y-axis and stops at the curve. The second graph labeled “b” is the same curve as the first graph. The rectangle from the first graph has been rotated around the y-axis to form a horizontal disk.

Figure 11. (a) Shown is a thin rectangle between the curve of the function [latex]g(y)=\sqrt{4-y}[/latex] and the [latex]y\text{-axis}\text{.}[/latex] (b) The rectangle forms a representative disk after revolution around the [latex]y\text{-axis}\text{.}[/latex]

The region to be revolved and the full solid of revolution are depicted in the following figure.

This figure has two graphs. The first graph labeled “a” is the curve g(y) = squareroot(4-y). It is a decreasing curve starting on the y-axis at y=4. The region formed by the x-axis, the y-axis, and the curve is shaded. This region is in the first quadrant. The second graph labeled “b” is the same curve as the first graph. The region from the first graph has been rotated around the y-axis to form a solid.

Figure 12. (a) The region to the left of the function [latex]g(y)=\sqrt{4-y}[/latex] over the [latex]y\text{-axis}[/latex] interval [latex]\left[0,4\right].[/latex] (b) The solid of revolution formed by revolving the region about the [latex]y\text{-axis}\text{.}[/latex]

To find the volume, we integrate with respect to [latex]y.[/latex] We obtain

[latex]\begin{array}{cc}\hfill V& ={\displaystyle\int }_{c}^{d}\pi {\left[g(y)\right]}^{2}dy\hfill \\ & ={\displaystyle\int }_{0}^{4}\pi {\left[\sqrt{4-y}\right]}^{2}dy=\pi {\displaystyle\int }_{0}^{4}(4-y)dy\hfill \\ & ={\pi \left[4y-\frac{{y}^{2}}{2}\right]|}_{0}^{4}=8\pi .\hfill \end{array}[/latex]

 

The volume is [latex]8\pi[/latex] units3.

Try It

Use the disk method to find the volume of the solid of revolution generated by rotating the region between the graph of [latex]g(y)=y[/latex] and the [latex]y\text{-axis}[/latex] over the interval [latex]\left[1,4\right][/latex] around the [latex]y\text{-axis}\text{.}[/latex]

Try It

The Washer Method

Some solids of revolution have cavities in the middle; they are not solid all the way to the axis of revolution. Sometimes, this is just a result of the way the region of revolution is shaped with respect to the axis of revolution. In other cases, cavities arise when the region of revolution is defined as the region between the graphs of two functions. A third way this can happen is when an axis of revolution other than the [latex]x\text{-axis}[/latex] or [latex]y\text{-axis}[/latex] is selected.

When the solid of revolution has a cavity in the middle, the slices used to approximate the volume are not disks, but washers (disks with holes in the center). For example, consider the region bounded above by the graph of the function [latex]f(x)=\sqrt{x}[/latex] and below by the graph of the function [latex]g(x)=1[/latex] over the interval [latex]\left[1,4\right].[/latex] When this region is revolved around the [latex]x\text{-axis,}[/latex] the result is a solid with a cavity in the middle, and the slices are washers. The graph of the function and a representative washer are shown in Figure 13(a) and (b). The region of revolution and the resulting solid are shown in Figure 13(c) and (d).

This figure has four graphs. The first graph is labeled “a” and has the two functions f(x)=squareroot(x) and g(x)=1 graphed in the first quadrant. f(x) is an increasing curve starting at the origin and g(x) is a horizontal line at y=1. The curves intersect at the ordered pair (1,1). In between the curves is a shaded rectangle with the bottom on g(x) and the top at f(x). The second graph labeled “b” is the same two curves as the first graph. The shaded rectangle between the curves from the first graph has been rotated around the x-axis to form an open disk or washer. The third graph labeled “a” has the same two curves as the first graph. There is a shaded region between the two curves between where they intersect and a line at x=4. The fourth graph is the same two curves as the first with the region from the third graph rotated around the x-axis forming a solid region with a hollow center. The hollow center is represented on the graph with broken horizontal lines at y=1 and y=-1.

Figure 13. (a) A thin rectangle in the region between two curves. (b) A representative disk formed by revolving the rectangle about the [latex]x\text{-axis}.[/latex] (c) The region between the curves over the given interval. (d) The resulting solid of revolution.

The cross-sectional area, then, is the area of the outer circle less the area of the inner circle. In this case,

[latex]A(x)=\pi {(\sqrt{x})}^{2}-\pi {(1)}^{2}=\pi (x-1).[/latex]

 

Then the volume of the solid is

[latex]\begin{array}{cc}\hfill V& ={\displaystyle\int }_{a}^{b}A(x)dx\hfill \\ & ={\displaystyle\int }_{1}^{4}\pi (x-1)dx={\pi \left[\frac{{x}^{2}}{2}-x\right]|}_{1}^{4}=\frac{9}{2}\pi {\text{units}}^{3}.\hfill \end{array}[/latex]

 

Generalizing this process gives the washer method.

The Washer Method

Suppose [latex]f(x)[/latex] and [latex]g(x)[/latex] are continuous, nonnegative functions such that [latex]f(x)\ge g(x)[/latex] over [latex]\left[a,b\right].[/latex] Let [latex]R[/latex] denote the region bounded above by the graph of [latex]f(x),[/latex] below by the graph of [latex]g(x),[/latex] on the left by the line [latex]x=a,[/latex] and on the right by the line [latex]x=b.[/latex] Then, the volume of the solid of revolution formed by revolving [latex]R[/latex] around the [latex]x\text{-axis}[/latex] is given by

[latex]V={\displaystyle\int }_{a}^{b}\pi \left[{(f(x))}^{2}-{(g(x))}^{2}\right]dx.[/latex]

 

Example: Using the Washer Method

Find the volume of a solid of revolution formed by revolving the region bounded above by the graph of [latex]f(x)=x[/latex] and below by the graph of [latex]g(x)=\frac{1}{x}[/latex] over the interval [latex]\left[1,4\right][/latex] around the [latex]x\text{-axis}\text{.}[/latex]

Try It

Find the volume of a solid of revolution formed by revolving the region bounded by the graphs of [latex]f(x)=\sqrt{x}[/latex] and [latex]g(x)=\frac{1}{x}[/latex] over the interval [latex]\left[1,3\right][/latex] around the [latex]x\text{-axis}\text{.}[/latex]

Watch the following video to see the worked solution to the above Try It.

As with the disk method, we can also apply the washer method to solids of revolution that result from revolving a region around the [latex]y[/latex]-axis. In this case, the following rule applies.

The Washer Method for Solids of Revolution around the [latex]y[/latex]-axis

Suppose [latex]u(y)[/latex] and [latex]v(y)[/latex] are continuous, nonnegative functions such that [latex]v(y)\le u(y)[/latex] for [latex]y\in \left[c,d\right].[/latex] Let [latex]Q[/latex] denote the region bounded on the right by the graph of [latex]u(y),[/latex] on the left by the graph of [latex]v(y),[/latex] below by the line [latex]y=c,[/latex] and above by the line [latex]y=d.[/latex] Then, the volume of the solid of revolution formed by revolving [latex]Q[/latex] around the [latex]y\text{-axis}[/latex] is given by

[latex]V={\displaystyle\int }_{c}^{d}\pi \left[{(u(y))}^{2}-{(v(y))}^{2}\right]dy[/latex]

Rather than looking at an example of the washer method with the [latex]y\text{-axis}[/latex] as the axis of revolution, we now consider an example in which the axis of revolution is a line other than one of the two coordinate axes. The same general method applies, but you may have to visualize just how to describe the cross-sectional area of the volume.

An important thing to remember is that for both the disk and washer method, the rectangles (the radii of the cross-sectional circles) are always perpendicular to the axis of revolution.

Example: The Washer Method with a Different Axis of Revolution

Find the volume of a solid of revolution formed by revolving the region bounded above by [latex]f(x)=4-x[/latex] and below by the [latex]x\text{-axis}[/latex] over the interval [latex]\left[0,4\right][/latex] around the line [latex]y=-2.[/latex]

Try It

Find the volume of a solid of revolution formed by revolving the region bounded above by the graph of [latex]f(x)=x+2[/latex] and below by the [latex]x\text{-axis}[/latex] over the interval [latex]\left[0,3\right][/latex] around the line [latex]y=-1.[/latex]