Molarity

Learning Objectives

By the end of this section, you will be able to:

Describe the fundamental properties of solutions
Calculate solution concentrations using molarity
Perform dilution calculations using the dilution equation

A picture is shown of sugar being poured from a spoon into a cup.

Figure 1. Sugar is one of many components in the complex mixture known as coffee. The amount of sugar in a given amount of coffee is an important determinant of the beverage’s sweetness. (credit: Jane Whitney)

In preceding sections, we focused on the composition of substances: samples of matter that contain only one type of element or compound. However, mixtures—samples of matter containing two or more substances physically combined—are more commonly encountered in nature than are pure substances. Similar to a pure substance, the relative composition of a mixture plays an important role in determining its properties. The relative amount of oxygen in a planet’s atmosphere determines its ability to sustain aerobic life. The relative amounts of iron, carbon, nickel, and other elements in steel (a mixture known as an “alloy”) determine its physical strength and resistance to corrosion. The relative amount of the active ingredient in a medicine determines its effectiveness in achieving the desired pharmacological effect. The relative amount of sugar in a beverage determines its sweetness (see Figure 1). In this section, we will describe one of the most common ways in which the relative compositions of mixtures may be quantified.

Solutions

We have previously defined solutions as homogeneous mixtures, meaning that the composition of the mixture (and therefore its properties) is uniform throughout its entire volume. Solutions occur frequently in nature and have also been implemented in many forms of manmade technology. We will explore a more thorough treatment of solution properties in the chapter on solutions and colloids, but here we will introduce some of the basic properties of solutions.

The relative amount of a given solution component is known as its concentration. Often, though not always, a solution contains one component with a concentration that is significantly greater than that of all other components. This component is called the solvent and may be viewed as the medium in which the other components are dispersed, or dissolved. Solutions in which water is the solvent are, of course, very common on our planet. A solution in which water is the solvent is called an aqueous solution.

A solute is a component of a solution that is typically present at a much lower concentration than the solvent. Solute concentrations are often described with qualitative terms such as dilute (of relatively low concentration) and concentrated (of relatively high concentration).

Concentrations may be quantitatively assessed using a wide variety of measurement units, each convenient for particular applications. Molarity (M) is a useful concentration unit for many applications in chemistry. Molarity is defined as the number of moles of solute in exactly 1 liter (1 L) of the solution:

[latex]\displaystyle{M}=\frac{\text{mol solute}}{\text{L solution}}[/latex]

Example 1: Calculating Molar Concentrations

A 355-mL soft drink sample contains 0.133 mol of sucrose (table sugar). What is the molar concentration of sucrose in the beverage?

Show Answer

Check Your Learning

A teaspoon of table sugar contains about 0.01 mol sucrose. What is the molarity of sucrose if a teaspoon of sugar has been dissolved in a cup of tea with a volume of 200 mL?

Show Answer

Example 2: Deriving Moles and Volumes from Molar Concentrations

How much sugar (mol) is contained in a modest sip (~10 mL) of the soft drink from Example 1?

Show Answer

Check Your Learning

What volume (mL) of the sweetened tea described in Example 1 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example?

Show Answer

Example 3: Calculating Molar Concentrations from the Mass of Solute

Distilled white vinegar (Figure 2) is a solution of acetic acid, CH₃CO₂H, in water. A 0.500-L vinegar solution contains 25.2 g of acetic acid. What is the concentration of the acetic acid solution in units of molarity?

A label on a container is shown. The label has a picture of a salad with the words “Distilled White Vinegar,” and, “Reduced with water to 5% acidity,” written above it.

Figure 2. Distilled white vinegar is a solution of acetic acid in water.

Show Answer

Check Your Learning

Calculate the molarity of 6.52 g of CoCl₂ (128.9 g/mol) dissolved in an aqueous solution with a total volume of 75.0 mL.

Show Answer

Example 4: Determining the Mass of Solute in a Given Volume of Solution

How many grams of NaCl are contained in 0.250 L of a 5.30-M solution?

Show Answer

Check Your Learning

How many grams of CaCl₂ (110.98 g/mol) are contained in 250.0 mL of a 0.200-M solution of calcium chloride?

Show Answer

When performing calculations stepwise, as in Example 4, it is important to refrain from rounding any intermediate calculation results, which can lead to rounding errors in the final result. In Example 4, the molar amount of NaCl computed in the first step, 1.325 mol, would be properly rounded to 1.32 mol if it were to be reported; however, although the last digit (5) is not significant, it must be retained as a guard digit in the intermediate calculation. If we had not retained this guard digit, the final calculation for the mass of NaCl would have been 77.1 g, a difference of 0.3 g.

In addition to retaining a guard digit for intermediate calculations, we can also avoid rounding errors by performing computations in a single step (see Example 5). This eliminates intermediate steps so that only the final result is rounded.

Example 5: Determining the Volume of Solution Containing a Given Mass of Solute

In Example 3, we found the typical concentration of vinegar to be 0.839 M. What volume of vinegar contains 75.6 g of acetic acid?

Show Answer

Check Your Learning

What volume of a 1.50-M KBr solution contains 66.0 g KBr?

Show Answer

Dilution of Solutions

This figure shows two graduated cylinders side-by-side. The first has about half as much blue liquid as the second. The blue liquid is darker in the first cylinder than in the second.

Figure 3. Both solutions contain the same mass of copper nitrate. The solution on the right is more dilute because the copper nitrate is dissolved in more solvent. (credit: Mark Ott)

Dilution is the process whereby the concentration of a solution is lessened by the addition of solvent. For example, we might say that a glass of iced tea becomes increasingly diluted as the ice melts. The water from the melting ice increases the volume of the solvent (water) and the overall volume of the solution (iced tea), thereby reducing the relative concentrations of the solutes that give the beverage its taste (Figure 3).

Dilution is also a common means of preparing solutions of a desired concentration. By adding solvent to a measured portion of a more concentrated stock solution, we can achieve a particular concentration. For example, commercial pesticides are typically sold as solutions in which the active ingredients are far more concentrated than is appropriate for their application. Before they can be used on crops, the pesticides must be diluted. This is also a very common practice for the preparation of a number of common laboratory reagents (Figure 4).

This figure shows two photos. In the first, there is an empty glass container, 4.75 g of K M n O subscript 4 powder on a white circle, and a bottle of distilled water. In the second photo the powder and about half the water have been added to the glass container. The liquid in the glass container is almost black in color.

Figure 4. A solution of KMnO4 is prepared by mixing water with 4.74 g of KMnO4 in a flask. (credit: modification of work by Mark Ott)

A simple mathematical relationship can be used to relate the volumes and concentrations of a solution before and after the dilution process. According to the definition of molarity, the molar amount of solute in a solution is equal to the product of the solution’s molarity and its volume in liters: [latex]n=ML[/latex].

Expressions like these may be written for a solution before and after it is diluted:

[latex]{n}_{1}={M}_{1}{L}_{1}[/latex]
[latex]{n}_{2}={M}_{2}{L}_{2}[/latex]

where the subscripts “1” and “2” refer to the solution before and after the dilution, respectively. Since the dilution process does not change the amount of solute in the solution, n₁ = n₂. Thus, these two equations may be set equal to one another:

[latex]{M}_{1}{L}_{1}={M}_{2}{L}_{2}[/latex]

This relation is commonly referred to as the dilution equation. Although we derived this equation using molarity as the unit of concentration and liters as the unit of volume, other units of concentration and volume may be used, so long as the units properly cancel per the factor-label method. Reflecting this versatility, the dilution equation is often written in the more general form:

[latex]{C}_{1}{V}_{1}={C}_{2}{V}_{2}[/latex]

where C and V are concentration and volume, respectively.

Use the PhET simulation for Concentration to explore the relations between solute amount, solution volume, and concentration and to confirm the dilution equation.

Example 6: Determining the Concentration of a Diluted Solution

If 0.850 L of a 5.00-M solution of copper nitrate, Cu(NO₃)₂, is diluted to a volume of 1.80 L by the addition of water, what is the molarity of the diluted solution?

Show Answer

Check Your Learning

What is the concentration of the solution that results from diluting 25.0 mL of a 2.04-M solution of CH₃OH to 500.0 mL?

Show Answer

Example 7: Volume of a Diluted Solution

What volume of 0.12 M HBr can be prepared from 11 mL (0.011 L) of 0.45 M HBr?

Show Answer

Check Your Learning

A laboratory experiment calls for 0.125 M HNO₃. What volume of 0.125 M HNO₃ can be prepared from 0.250 L of 1.88 M HNO₃?

Show Answer

Example 8: Volume of a Concentrated Solution Needed for Dilution

What volume of 1.59 M KOH is required to prepare 5.00 L of 0.100 M KOH?

Show Answer

Check Your Learning

What volume of a 0.575-M solution of glucose, C₆H₁₂O₆, can be prepared from 50.00 mL of a 3.00-M glucose solution?

Show Answer

Key Concepts and Summary

Solutions are homogeneous mixtures. Many solutions contain one component, called the solvent, in which other components, called solutes, are dissolved. An aqueous solution is one for which the solvent is water. The concentration of a solution is a measure of the relative amount of solute in a given amount of solution. Concentrations may be measured using various units, with one very useful unit being molarity, defined as the number of moles of solute per liter of solution. The solute concentration of a solution may be decreased by adding solvent, a process referred to as dilution. The dilution equation is a simple relation between concentrations and volumes of a solution before and after dilution.

Key Equations

[latex]M=\frac{\text{mol solute}}{\text{L solution}}[/latex]
C₁V₁ = C₂V₂

Exercises

Explain what changes and what stays the same when 1.00 L of a solution of NaCl is diluted to 1.80 L.
What information do we need to calculate the molarity of a sulfuric acid solution?
What does it mean when we say that a 200-mL sample and a 400-mL sample of a solution of salt have the same molarity? In what ways are the two samples identical? In what ways are these two samples different
Determine the molarity for each of the following solutions:
1. 0.444 mol of CoCl₂ in 0.654 L of solution
2. 98.0 g of phosphoric acid, H₃PO₄, in 1.00 L of solution
3. 0.2074 g of calcium hydroxide, Ca(OH)₂, in 40.00 mL of solution
4. 10.5 kg of Na₂SO₄•10H₂O in 18.60 L of solution
5. [latex]7.0\times {10}^{-3}\text{mol}[/latex] of I₂ in 100.0 mL of solution
6. [latex]1.8\times {10}^{4}\text{mg}[/latex] of HCl in 0.075 L of solution
Determine the molarity of each of the following solutions:
1. 1.457 mol KCl in 1.500 L of solution
2. 0.515 g of H₂SO₄ in 1.00 L of solution
3. 20.54 g of Al(NO₃)₃ in 1575 mL of solution
4. 2.76 kg of CuSO₄•5H₂O in 1.45 L of solution
5. 0.005653 mol of Br₂ in 10.00 mL of solution
6. 0.000889 g of glycine, C₂H₅NO₂, in 1.05 mL of solution
Consider this question: What is the mass of the solute in 0.500 L of 0.30 M glucose, C₆H₁₂O₆, used for intravenous injection?
1. Outline the steps necessary to answer the question.
2. Answer the question.
Consider this question: What is the mass of solute in 200.0 L of a 1.556-M solution of KBr?
1. Outline the steps necessary to answer the question.
2. Answer the question.
Calculate the number of moles and the mass of the solute in each of the following solutions:
1. 2.00 L of 18.5 M H₂SO₄, concentrated sulfuric acid
2. 100.0 mL of [latex]3.8\times {10}^{-5}M\text{NaCN,}[/latex] the minimum lethal concentration of sodium cyanide in blood serum
3. 5.50 L of 13.3 M H₂CO, the formaldehyde used to “fix” tissue samples
4. 325 mL of [latex]1.8\times {10}^{-6}M[/latex] FeSO₄, the minimum concentration of iron sulfate detectable by taste in drinking water
Calculate the number of moles and the mass of the solute in each of the following solutions:
1. 325 mL of [latex]8.23\times {10}^{-5}M\text{KI}[/latex], a source of iodine in the diet
2. 75.0 mL of [latex]2.2\times {10}^{-5}M{\text{H}}_{2}{\text{SO}}_{4}[/latex], a sample of acid rain
3. 0.2500 L of 0.1135 M K₂CrO₄, an analytical reagent used in iron assays
4. 10.5 L of 3.716 M (NH₄)₂SO₄, a liquid fertilizer
Consider this question: What is the molarity of KMnO₄ in a solution of 0.0908 g of KMnO₄ in 0.500 L of solution?
1. Outline the steps necessary to answer the question.
2. Answer the question.
Consider this question: What is the molarity of HCl if 35.23 mL of a solution of HCl contain 0.3366 g of HCl?
1. Outline the steps necessary to answer the question.
2. Answer the question.
Calculate the molarity of each of the following solutions:
1. 0.195 g of cholesterol, C₂₇H₄₆O, in 0.100 L of serum, the average concentration of cholesterol in human serum
2. 4.25 g of NH₃ in 0.500 L of solution, the concentration of NH₃ in household ammonia
3. 1.49 kg of isopropyl alcohol, C₃H₇OH, in 2.50 L of solution, the concentration of isopropyl alcohol in rubbing alcohol
4. 0.029 g of I₂ in 0.100 L of solution, the solubility of I₂ in water at 20 °C
Calculate the molarity of each of the following solutions:
1. 293 g HCl in 666 mL of solution, a concentrated HCl solution
2. 2.026 g FeCl₃ in 0.1250 L of a solution used as an unknown in general chemistry laboratories
3. 0.001 mg Cd²⁺ in 0.100 L, the maximum permissible concentration of cadmium in drinking water
4. 0.0079 g C₇H₅SNO₃ in one ounce (29.6 mL), the concentration of saccharin in a diet soft drink.
There is about 1.0 g of calcium, as Ca²⁺, in 1.0 L of milk. What is the molarity of Ca²⁺ in milk?
What volume of a 1.00-M Fe(NO₃)₃ solution can be diluted to prepare 1.00 L of a solution with a concentration of 0.250 M?
If 0.1718 L of a 0.3556-M C₃H₇OH solution is diluted to a concentration of 0.1222 M, what is the volume of the resulting solution?
If 4.12 L of a 0.850 M-H₃PO₄ solution is be diluted to a volume of 10.00 L, what is the concentration the resulting solution?
What volume of a 0.33-M C₁₂H₂₂O₁₁ solution can be diluted to prepare 25 mL of a solution with a concentration of 0.025 M?
What is the concentration of the NaCl solution that results when 0.150 L of a 0.556-M solution is allowed to evaporate until the volume is reduced to 0.105 L?
What is the molarity of the diluted solution when each of the following solutions is diluted to the given final volume?
1. 1.00 L of a 0.250-M solution of Fe(NO₃)₃ is diluted to a final volume of 2.00 L
2. 0.5000 L of a 0.1222-M solution of C₃H₇OH is diluted to a final volume of 1.250 L
3. 2.35 L of a 0.350-M solution of H₃PO₄ is diluted to a final volume of 4.00 L
4. 22.50 mL of a 0.025-M solution of C₁₂H₂₂O₁₁ is diluted to 100.0 mL
What is the final concentration of the solution produced when 225.5 mL of a 0.09988-M solution of Na₂CO₃ is allowed to evaporate until the solution volume is reduced to 45.00 mL?
A 2.00-L bottle of a solution of concentrated HCl was purchased for the general chemistry laboratory. The solution contained 868.8 g of HCl. What is the molarity of the solution?
An experiment in a general chemistry laboratory calls for a 2.00-M solution of HCl. How many mL of 11.9 M HCl would be required to make 250 mL of 2.00 M HCl?
What volume of a 0.20-M K₂SO₄ solution contains 57 g of K₂SO₄?
The US Environmental Protection Agency (EPA) places limits on the quantities of toxic substances that may be discharged into the sewer system. Limits have been established for a variety of substances, including hexavalent chromium, which is limited to 0.50 mg/L. If an industry is discharging hexavalent chromium as potassium dichromate (K₂Cr₂O₇), what is the maximum permissible molarity of that substance?

Show Selected Answers

2. We need to know the number of moles of sulfuric acid dissolved in the solution and the volume of the solution.

4. The molarity of each solution is as follows:

[latex]\frac{0.444\text{mol}}{0.654\text{L}}=0.679{\text{mol L}}^{-1}=0.679M[/latex]
First convert mass in grams to moles, and then substitute the proper terms into the definition.
Molar mass of H₃PO₄ = 97.995 g/mol
[latex]{\text{mol (H}}_{3}{\text{PO}}_{4}\text{)}=98.0\text{g}\times \frac{1\text{mol}}{97.995\text{g}}=1.00\text{mol}[/latex]
[latex]M=\frac{1.00\text{mol}}{1.00\text{L}}=1.00M[/latex]
Molar mass [Ca(OH)₂] = 79.09 g/mol
[latex]0.2074\cancel{\text{g}}\times \frac{\text{1 mol}}{74.09\cancel{\text{g}}}=0.002799\text{mol}{\text{Ca(OH)}}_{2}[/latex]
[latex]\frac{0.002799\text{mol}}{0.0400\text{L}}=0.06998{\text{mol L}}^{-1}=0.06998M[/latex]
Molar mass (Na₂SO₄•10H₂O) = 322.20 g/mol
[latex]10,500\times \frac{1\text{mol}}{322.20\text{g}}=32.6\text{mol}[/latex]
[latex]\frac{32.6\text{mol}}{18.60\text{L}}=1.75M[/latex]
[latex]M=\frac{\text{millimoles solute}}{\text{volume of solution in milliliters}}[/latex]
[latex]\frac{{\text{7.00 mmol I}}_{2}}{\text{100 mL}}=0.070M[/latex]
Molar mass (HCl) = 36.46 g/mol
[latex]\text{mass (HCl)}=1.8\times {10}^{1}\text{g HCl}\times \frac{\text{1 mol}}{\text{36.46 g}}=\text{0.49 mol HCl}[/latex]
[latex]\frac{\text{0.49 mol HCl}}{\text{0.075 L}}=\text{6.6}M[/latex]

6. The answers are as follows:

determine the number of moles of glucose in 0.500 L of solution; determine the molar mass of glucose; determine the mass of glucose from the number of moles and its molar mass;
0.500 L contains [latex]0.30M\times 0.500\text{L}=1.5\times {10}^{-1}\text{mol.}[/latex] Molar mass (glucose): [latex]6\times \text{12.0011 g}+12\times \text{1.00794 g}+6\times \text{15.9994 g}=\text{180.158 g},1.5\times {10}^{-1}\cancel{\text{mol}}\times \text{180.158 g/}\cancel{\text{mol}}=\text{27 g.}[/latex]

8. The molarity must be converted to moles of solute, which is then converted to grams of solute:
Three boxes connected by right-facing arrows in between each are shown. Written inside the boxes are the phrases, “Volume of solution,” “moles of solute,” and “mass of solute,” respectively from left to right.

[latex]M=\frac{\text{mol}}{\text{liter}}\,\,\,\,\text{or}\,\,\,\,\text{mol}=M\times \text{liter}[/latex]

[latex]\begin{array}{l}\\ {\text{mol H}}_{2}{\text{SO}}_{4}=2.00\cancel{\text{L}}\times \frac{18.5\text{mol}}{\cancel{\text{L}}}=37.0\text{mol}{\text{H}}_{2}{\text{SO}}_{4}\\ 37.0\cancel{{\text{mol H}}_{2}{\text{SO}}_{4}}\times \frac{98.08{\text{g H}}_{2}{\text{SO}}_{4}}{1\cancel{{\text{mol H}}_{2}{\text{SO}}_{4}}}=3.63\times {10}^{3}{\text{g H}}_{2}{\text{SO}}_{4}\end{array}[/latex]
[latex]\begin{array}{l}\\ \text{mol NaCN}=0.1000\cancel{\text{L}}\times \frac{3.8\times {10}^{-5}\text{mol}}{\cancel{\text{L}}}=3.8\times {10}^{-6}\text{mol NaCN}\\ 3.8\times {10}^{-5}\cancel{\text{mol NaCN}}\times \frac{49.01\text{g}}{1\cancel{\text{mol NaCN}}}=1.9\times {\text{10}}^{-4}\text{g NaCN}\end{array}[/latex]
[latex]\begin{array}{l}\\ {\text{mol H}}_{2}\text{CO}=5.50\cancel{\text{L}}\times \frac{13.3\text{mol}}{\cancel{\text{L}}}=73.2\text{mol}{\text{H}}_{2}\text{CO}\\ 73.2\cancel{\text{mol}{\text{H}}_{2}\text{CO}}\times \frac{30.026\text{g}}{1\cancel{{\text{mol H}}_{2}\text{CO}}}=2198\text{g}{\text{H}}_{2}\text{CO}=2.20\text{kg}{\text{H}}_{2}\text{CO}\end{array}[/latex]
[latex]\begin{array}{l}\\ {\text{mol FeSO}}_{4}=0.325\cancel{\text{L}}\times \frac{1.8\times {10}^{-6}\text{mol}}{\cancel{L}}=5.9\times {10}^{-7}{\text{mol FeSO}}_{4}\\ 5.85\times {10}^{-7}\cancel{{\text{mol FeSO}}_{4}}\times \frac{151.9\text{g}}{1\cancel{{\text{mol FeSO}}_{4}}}=8.9\times {10}^{-5}{\text{g FeSO}}_{4}\end{array}[/latex]

10. The answers are as follows:

Determine the molar mass of KMnO₄; determine the number of moles of KMnO₄ in the solution; from the number of moles and the volume of solution, determine the molarity
Molar mass of KMnO₄ = 158.0264 g/mol
[latex]\begin{array}{l}\\ \text{mol}{\text{KMnO}}_{4}=0.0908\cancel{\text{g}{\text{KMnO}}_{4}}\times \frac{\text{1 mol}}{158.0264\cancel{{\text{g KMnO}}_{4}}}=5.746\times {10}^{-4}\text{mol}\\ M{\text{KMnO}}_{4}=\frac{5.746\times {10}^{-4}\text{mol}}{0.500\text{L}}=1.15\times {10}^{-3}M\end{array}[/latex]

12. The molarity for each solution is as follows:

[latex]M{\text{C}}_{27}{\text{H}}_{46}\text{O}=\frac{\text{mol}}{V}=\frac{\frac{0.195\cancel{g}{\text{C}}_{27}{\text{H}}_{46}\text{O}}{386.660\cancel{\text{g}}{\text{mol}}^{-1}{\text{C}}_{27}{\text{H}}_{46}\text{O}}}{0.100\text{L}}=5.04\times {10}^{-3}M[/latex]
[latex]M{\text{NH}}_{3}=\frac{\text{mol}}{V}=\frac{\frac{4.25\cancel{g}{\text{NH}}_{3}}{17.0304\cancel{\text{g}}{\text{mol}}^{-1}{\text{NH}}_{3}}}{0.500\text{L}}=0.499M[/latex]
[latex]M{\text{C}}_{3}{\text{H}}_{7}\text{OH}=\frac{\text{mol}}{V}=\frac{1.49\cancel{\text{kg}}{\text{C}}_{3}{\text{H}}_{7}\text{OH}\times \frac{1000\cancel{g}}{1\cancel{\text{kg}}}\times \frac{1\text{mol}{\text{C}}_{3}{\text{H}}_{7}\text{OH}}{60.096\cancel{\text{g}}}}{2.50\text{L}}=9.92M[/latex]
[latex]M{\text{I}}_{2}=\frac{\text{mol}}{V}=\frac{\frac{0.029\cancel{\text{g}}{\text{I}}_{2}}{253.8090\cancel{\text{g}}{\text{mol}}^{-1}{\text{I}}_{2}}}{0.100\text{L}}=1.1\times {10}^{-3}M[/latex]

14. [latex]M=\frac{\text{mol}}{V}=\frac{\frac{1.0\cancel{\text{g}}}{40.08\cancel{\text{g}}{\text{mol}}^{-1}}}{1.0\text{L}}=0.025M[/latex]

16. [latex]\begin{array}{c}\frac{{C}_{1}{V}_{1}}{{C}_{2}}={V}_{2}\\ \frac{\frac{0.3556\text{mol}}{\text{L}}\times 0.1718\text{L}}{\frac{0.1222\text{mol}}{\text{L}}}={V}_{2}\\ 0.5000\text{L}={V}_{2}\end{array}[/latex]

18. [latex]{V}_{1}=\frac{{V}_{2}\times {M}_{2}}{{M}_{2}}=25\text{mL}\times \frac{0.025M}{0.33M}=1.9\text{mL}[/latex]

20. The molarity for each diluted solution is as follows:

[latex]{C}_{2}=\frac{{V}_{1}\times {C}_{1}}{{V}_{2}}=1.00\cancel{\text{L}}\times \frac{0.250M}{2.00\cancel{\text{L}}}=0.125M[/latex]
[latex]{C}_{2}=\frac{{V}_{1}\times {C}_{1}}{{V}_{2}}=0.5000\cancel{\text{L}}\times \frac{0.1222M}{1.250\cancel{\text{L}}}=0.04888M[/latex]
[latex]{C}_{2}=\frac{{V}_{1}\times {C}_{1}}{{V}_{2}}=2.35\cancel{\text{L}}\times \frac{0.350M}{4.00\cancel{\text{L}}}=0.206M[/latex]
[latex]{C}_{2}=\frac{{V}_{1}\times {C}_{1}}{{V}_{2}}=0.02250\cancel{\text{mL}}\times \frac{0.025M}{0.100\cancel{\text{mL}}}=0.0056M[/latex]

22. Determine the number of moles in 434.4 g of HCl: 1.00794 + 35.4527 = 36.4606 g/mol

[latex]\text{mol HCl}=\frac{434.4\cancel{g}}{36.4606\cancel{g}{\text{mol}}^{-1}}=11.91\text{mol}[/latex]

This HCl is present in 1.00 L, so the molarity is 11.9 M.

24. [latex]57\text{g}{\text{K}}_{2}{\text{SO}}_{4}\times \frac{1\text{mol}}{174.26\text{g}}\times \frac{1\text{L}}{0.20\text{mol}}=1.6\text{L}[/latex]

Glossary

aqueous solution: solution for which water is the solvent

concentrated: qualitative term for a solution containing solute at a relatively high concentration

concentration: quantitative measure of the relative amounts of solute and solvent present in a solution

dilute: qualitative term for a solution containing solute at a relatively low concentration

dilution: process of adding solvent to a solution in order to lower the concentration of solutes

dissolved: describes the process by which solute components are dispersed in a solvent

molarity (M): unit of concentration, defined as the number of moles of solute dissolved in 1 liter of solution

solute: solution component present in a concentration less than that of the solvent

solvent: solution component present in a concentration that is higher relative to other components

Unit 6: Solutions, Acids and Bases

Learning Objectives

Solutions

Example 1: Calculating Molar Concentrations

Check Your Learning

Example 2: Deriving Moles and Volumes from Molar Concentrations

Check Your Learning

Example 3: Calculating Molar Concentrations from the Mass of Solute

Check Your Learning

Example 4: Determining the Mass of Solute in a Given Volume of Solution

Check Your Learning

Example 5: Determining the Volume of Solution Containing a Given Mass of Solute

Check Your Learning

Dilution of Solutions

Example 6: Determining the Concentration of a Diluted Solution

Check Your Learning

Example 7: Volume of a Diluted Solution

Check Your Learning

Example 8: Volume of a Concentrated Solution Needed for Dilution

Check Your Learning

Key Concepts and Summary

Key Equations

Exercises

Glossary