4.3 Reaction Stoichiometry

Learning Objectives

By the end of this section, you will be able to:

Explain the concept of stoichiometry as it pertains to chemical reactions
Use balanced chemical equations to derive stoichiometric factors relating amounts of reactants and products
Perform stoichiometric calculations involving mass, moles, and solution molarity

A balanced chemical equation provides a great deal of information in a very succinct format. Chemical formulas provide the identities of the reactants and products involved in the chemical change, allowing classification of the reaction. Coefficients provide the relative numbers of these chemical species, allowing a quantitative assessment of the relationships between the amounts of substances consumed and produced by the reaction. These quantitative relationships are known as the reaction’s stoichiometry, a term derived from the Greek words stoicheion (meaning “element”) and metron (meaning “measure”). In this module, the use of balanced chemical equations for various stoichiometric applications is explored.

The general approach to using stoichiometric relationships is similar in concept to the way people go about many common activities. Food preparation, for example, offers an appropriate comparison. A recipe for making eight pancakes calls for 1 cup pancake mix, [latex]\displaystyle\frac{3}{4}[/latex] cup milk, and one egg. The “equation” representing the preparation of pancakes per this recipe is

[latex]1\text{ cup mix}+\frac{3}{4}\text{cup milk}+1\text{egg}\rightarrow 8\text{pancakes}[/latex]

If two dozen pancakes are needed for a big family breakfast, the ingredient amounts must be increased proportionally according to the amounts given in the recipe. For example, the number of eggs required to make 24 pancakes is

[latex]24\cancel{\text{pancakes}}\times \frac{1\text{egg}}{8\cancel{\text{pancakes}}}=3\text{eggs}[/latex]

Balanced chemical equations are used in much the same fashion to determine the amount of one reactant required to react with a given amount of another reactant, or to yield a given amount of product, and so forth. The coefficients in the balanced equation are used to derive stoichiometric factors that permit computation of the desired quantity. To illustrate this idea, consider the production of ammonia by reaction of hydrogen and nitrogen:

[latex]{\text{N}}_{2}\text{(}g\text{)}+3{\text{H}}_{2}\text{(}g\text{)}\rightarrow 2{\text{NH}}_{3}\text{(}g\text{)}[/latex]

This equation shows ammonia molecules are produced from hydrogen molecules in a 2:3 ratio, and stoichiometric factors may be derived using any amount (number) unit:

[latex]\displaystyle\frac{2{\text{NH}}_{3}\text{ molecules}}{3{\text{H}}_{2}\text{ molecules}}\text{ or }\frac{\text{2 doz }{\text{NH}}_{3}\text{ molecules}}{\text{3 doz }{\text{H}}_{2}\text{ molecules}}\text{ or }\frac{\text{2 mol}{\text{ NH}}_{3}\text{ molecules}}{\text{3 mol}{\text{ H}}_{2}\text{ molecules}}[/latex]

These stoichiometric factors can be used to compute the number of ammonia molecules produced from a given number of hydrogen molecules, or the number of hydrogen molecules required to produce a given number of ammonia molecules. Similar factors may be derived for any pair of substances in any chemical equation.

Example 1: Moles of Reactant Required in a Reaction

How many moles of I₂ are required to react with 0.429 mol of Al according to the following equation (see Figure 1)?

[latex]2\text{Al}+3{\text{I}}_{2}\rightarrow 2{\text{AlI}}_{3}[/latex]

This figure shows three photos with an arrow leading from one to the next. The first photo shows a small pile of iodine and aluminum on a white surface. The second photo shows a small amount of purple smoke coming from the pile. The third photo shows a large amount of purple and gray smoke coming from the pile.

Figure 1. Aluminum and iodine react to produce aluminum iodide. The heat of the reaction vaporizes some of the solid iodine as a purple vapor. (credit: modification of work by Mark Ott)

Show Answer

Check Your Learning

How many moles of Ca(OH)₂ are required to react with 1.36 mol of H₃PO₄ to produce Ca₃(PO₄)₂ according to the equation [latex]3\text{Ca}{\text{(}\text{OH}\text{)}}_{2}+2{\text{H}}_{3}{\text{PO}}_{4}\rightarrow{\text{Ca}}_{3}{\text{(}{\text{PO}}_{4}\text{)}}_{2}+6{\text{H}}_{2}\text{O}[/latex]?

Show Answer

Example 2: Number of Product Molecules Generated by a Reaction

How many carbon dioxide molecules are produced when 0.75 mol of propane is combusted according to this equation?

[latex]{\text{C}}_{3}{\text{H}}_{8}+5{\text{O}}_{2}\rightarrow 3{\text{CO}}_{2}+4{\text{H}}_{2}\text{O}[/latex]

Show Answer

Check Your Learning

How many NH₃ molecules are produced by the reaction of 4.0 mol of Ca(OH)₂ according to the following equation:

[latex]{\text{(}{\text{NH}}_{4}\text{)}}_{2}{\text{SO}}_{4}+\text{Ca}{\text{(}\text{OH}\text{)}}_{2}\rightarrow 2{\text{NH}}_{3}+{\text{CaSO}}_{4}+2{\text{H}}_{2}\text{O.}[/latex]

Show Answer

These examples illustrate the ease with which the amounts of substances involved in a chemical reaction of known stoichiometry may be related. Directly measuring numbers of atoms and molecules is, however, not an easy task, and the practical application of stoichiometry requires that we use the more readily measured property of mass.

Example 3: Relating Masses of Reactants and Products

What mass of sodium hydroxide, NaOH, would be required to produce 16 g of the antacid milk of magnesia [magnesium hydroxide, Mg(OH)₂] by the following reaction?

[latex]{\text{MgCl}}_{2}\text{(}aq\text{)}+2\text{NaOH}\text{(}aq\text{)}\rightarrow\text{Mg}{\text{(}\text{OH}\text{)}}_{2}\text{(}s\text{)}+2\text{NaCl}\text{(}aq\text{)}[/latex]

Show Answer

Check Your Learning

What mass of gallium oxide, Ga₂O₃, can be prepared from 29.0 g of gallium metal? The equation for the reaction is [latex]4\text{Ga}+3{\text{O}}_{2}\rightarrow 2{\text{Ga}}_{2}{\text{O}}_{3}\text{.}[/latex]

Show Answer

Example 4: Relating Masses of Reactants

What mass of oxygen gas, O₂, from the air is consumed in the combustion of 702 g of octane, C₈H₁₈, one of the principal components of gasoline?

[latex]2{\text{C}}_{8}{\text{H}}_{18}+25{\text{O}}_{2}\rightarrow 16{\text{CO}}_{2}+18{\text{H}}_{2}\text{O}[/latex]

Show Answer

Check Your Learning

What mass of CO is required to react with 25.13 g of Fe₂O₃ according to the equation [latex]{\text{Fe}}_{2}{\text{O}}_{3}+3\text{CO}\rightarrow 2\text{Fe}+3{\text{CO}}_{2}?[/latex]

Show Answer

These examples illustrate just a few instances of reaction stoichiometry calculations. Numerous variations on the beginning and ending computational steps are possible depending upon what particular quantities are provided and sought (volumes, solution concentrations, and so forth). Regardless of the details, all these calculations share a common essential component: the use of stoichiometric factors derived from balanced chemical equations. Figure 2 provides a general outline of the various computational steps associated with many reaction stoichiometry calculations.

This flowchart shows 10 rectangles connected by double headed arrows. To the upper left, a rectangle is shaded lavender and is labeled, “Volume of pure substance A.” This rectangle is followed by a horizontal double headed arrow labeled, “Density.” It connects to a second rectangle which is shaded yellow and is labeled, “Mass of A.” This rectangle is followed by a double headed arrow which is labeled, “Molar Mass,” that connects to a third rectangle which is shaded pink and is labeled, “Moles of A.” To the left of this rectangle is a horizontal double headed arrow labeled, “Molarity,” which connects to a lavender rectangle which is labeled, “Volume of solution A.” The pink, “Moles of A,” rectangle is also connected with a double headed arrow below and to the left. This arrow is labeled “Avogadro’s number.” It connects to a green shaded rectangle that is labeled, “Number of particles of A.” To the right of the pink “Moles of A,” rectangle is a horizontal double headed arrow which is labeled, “Stoichiometric factor.” It connects to a second pink rectangle which is labeled, “Moles of B.” A double headed arrow which is labeled, “Molar mass,” extends from the top of this rectangle above and to the right to a yellow shaded rectangle labeled, “Mass of B.” A horizontal double headed arrow which is labeled, “Density” links to a lavender rectangle labeled, “Volume of substance B,” to the right. A horizontal double headed arrow labeled, “Molarity,” extends right to the of the pink “Moles of B” rectangle. This arrow connects to a lavender rectangle that is labeled, “Volume of substance B.” Another double headed arrow extends below and to the right of the pink “Moles of B” rectangle. This arrow is labeled “Avogadro’s number,” and it extends to a green rectangle which is labeled, “Number of particles of B.”

Figure 2. The flow chart depicts the various computational steps involved in most reaction stoichiometry calculations.

Airbags

Figure 3. Airbags deploy upon impact to minimize serious injuries to passengers. (credit: Jon Seidman)

Airbags (Figure 3) are a safety feature provided in most automobiles since the 1990s. The effective operation of an airbag requires that it be rapidly inflated with an appropriate amount (volume) of gas when the vehicle is involved in a collision. This requirement is satisfied in many automotive airbag systems through use of explosive chemical reactions, one common choice being the decomposition of sodium azide, NaN₃. When sensors in the vehicle detect a collision, an electrical current is passed through a carefully measured amount of NaN₃ to initiate its decomposition:

[latex]2{\text{NaN}}_{3}\text{(}s\text{)}\rightarrow 3{\text{N}}_{2}\text{(}g\text{)}+2\text{Na}\text{(}s\text{)}[/latex]

This reaction is very rapid, generating gaseous nitrogen that can deploy and fully inflate a typical airbag in a fraction of a second (~0.03–0.1 s). Among many engineering considerations, the amount of sodium azide used must be appropriate for generating enough nitrogen gas to fully inflate the air bag and ensure its proper function. For example, a small mass (~100 g) of NaN₃ will generate approximately 50 L of N₂.

For more information about the chemistry and physics behind airbags and for helpful diagrams on how airbags work, go to How Stuff Works’ “How Airbags Work” article.

Key Concepts and Summary

A balanced chemical equation may be used to describe a reaction’s stoichiometry (the relationships between amounts of reactants and products). Coefficients from the equation are used to derive stoichiometric factors that subsequently may be used for computations relating reactant and product masses, molar amounts, and other quantitative properties.

Exercises

Write the balanced equation, then outline the steps necessary to determine the information requested in each of the following:
1. The number of moles and the mass of chlorine, Cl₂, required to react with 10.0 g of sodium metal, Na, to produce sodium chloride, NaCl.
2. The number of moles and the mass of oxygen formed by the decomposition of 1.252 g of mercury(II) oxide.
3. The number of moles and the mass of sodium nitrate, NaNO₃, required to produce 128 g of oxygen. (NaNO₂ is the other product.)
4. The number of moles and the mass of carbon dioxide formed by the combustion of 20.0 kg of carbon in an excess of oxygen.
5. The number of moles and the mass of copper(II) carbonate needed to produce 1.500 kg of copper(II) oxide. (CO₂ is the other product.)
Determine the number of moles and the mass requested for each reaction in Exercise 1.
Write the balanced equation, then outline the steps necessary to determine the information requested in each of the following:
1. The number of moles and the mass of Mg required to react with 5.00 g of HCl and produce MgCl₂ and H₂.
2. The number of moles and the mass of oxygen formed by the decomposition of 1.252 g of silver(I) oxide.
3. The number of moles and the mass of magnesium carbonate, MgCO₃, required to produce 283 g of carbon dioxide. (MgO is the other product.)
4. The number of moles and the mass of water formed by the combustion of 20.0 kg of acetylene, C₂H₂, in an excess of oxygen.
5. The number of moles and the mass of barium peroxide, BaO₂, needed to produce 2.500 kg of barium oxide, BaO (O₂ is the other product.)
Determine the number of moles and the mass requested for each reaction in Exercise 3.
H₂ is produced by the reaction of 118.5 mL of a 0.8775-M solution of H₃PO₄ according to the following equation: [latex]2\text{Cr}+2{\text{H}}_{3}{\text{PO}}_{4}\rightarrow 3{\text{H}}_{2}+2{\text{CrPO}}_{4}\text{.}[/latex]
1. Outline the steps necessary to determine the number of moles and mass of H₂.
2. Perform the calculations outlined.
Gallium chloride is formed by the reaction of 2.6 L of a 1.44 M solution of HCl according to the following equation: [latex]2\text{Ga}+6\text{HCl}\rightarrow 2{\text{GaCl}}_{3}+3{\text{H}}_{2}\text{.}[/latex]
1. Outline the steps necessary to determine the number of moles and mass of gallium chloride.
2. Perform the calculations outlined.
I₂ is produced by the reaction of 0.4235 mol of CuCl₂ according to the following equation: [latex]2{\text{CuCl}}_{2}+4\text{KI}\rightarrow 2\text{CuI}+4\text{KCl}+{\text{I}}_{2}\text{.}[/latex]
1. How many molecules of I₂ are produced?
2. What mass of I₂ is produced?
Silver is often extracted from ores as K[Ag(CN)₂] and then recovered by the reaction [latex]2\text{K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]\text{(}aq\text{)}+\text{Zn}\text{(}s\text{)}\rightarrow 2Ag\text{(}s\text{)}+\text{Zn}{\text{(}\text{CN}\text{)}}_{2}\text{(}aq\text{)}+2\text{KCN}\text{(}aq\text{)}[/latex]
1. How many molecules of Zn(CN)₂ are produced by the reaction of 35.27 g of K[Ag(CN)₂]?
2. What mass of Zn(CN)₂ is produced?
What mass of silver oxide, Ag₂O, is required to produce 25.0 g of silver sulfadiazine, AgC₁₀H₉N₄SO₂, from the reaction of silver oxide and sulfadiazine? [latex]2{\text{C}}_{10}{\text{H}}_{10}{\text{N}}_{4}{\text{SO}}_{2}+{\text{Ag}}_{2}\text{O}\rightarrow 2{\text{AgC}}_{10}{\text{H}}_{9}{\text{N}}_{4}{\text{SO}}_{2}+{\text{H}}_{2}\text{O}[/latex]
Carborundum is silicon carbide, SiC, a very hard material used as an abrasive on sandpaper and in other applications. It is prepared by the reaction of pure sand, SiO₂, with carbon at high temperature. Carbon monoxide, CO, is the other product of this reaction. Write the balanced equation for the reaction, and calculate how much SiO₂ is required to produce 3.00 kg of SiC.
Automotive air bags inflate when a sample of sodium azide, NaN₃, is very rapidly decomposed.[latex]2{\text{NaN}}_{3}\text{(}s\text{)}\rightarrow 2\text{Na}\text{(}s\text{)}+3{\text{N}}_{2}\text{(}g\text{)}[/latex] What mass of sodium azide is required to produce 2.6 ft³ (73.6 L) of nitrogen gas with a density of 1.25 g/L?
Urea, CO(NH₂)₂, is manufactured on a large scale for use in producing urea-formaldehyde plastics and as a fertilizer. What is the maximum mass of urea that can be manufactured from the CO₂ produced by combustion of [latex]1.00\times {10}^{3}\text{kg}[/latex] of carbon followed by the reaction? [latex]{\text{CO}}_{2}\text{(}g\text{)}+2{\text{NH}}_{3}\text{(}g\text{)}\rightarrow\text{CO}{\text{(}{\text{NH}}_{2}\text{)}}_{2}\text{(}s\text{)}+{\text{H}}_{2}\text{O}\text{(}l\text{)}[/latex]
In an accident, a solution containing 2.5 kg of nitric acid was spilled. Two kilograms of Na₂CO₃ was quickly spread on the area and CO₂ was released by the reaction. Was sufficient Na₂CO₃ used to neutralize all of the acid?
A compact car gets 37.5 miles per gallon on the highway. If gasoline contains 84.2% carbon by mass and has a density of 0.8205 g/mL, determine the mass of carbon dioxide produced during a 500-mile trip (3.785 liters per gallon).
What volume of a 0.750 M solution of hydrochloric acid, a solution of HCl, can be prepared from the HCl produced by the reaction of 25.0 g of NaCl with an excess of sulfuric acid? [latex]\text{NaCl}\text{(}s\text{)}+{\text{H}}_{2}{\text{SO}}_{4}\text{(}l\text{)}\rightarrow\text{HCl}\text{(}g\text{)}+{\text{NaHSO}}_{4}\text{(}s\text{)}[/latex]
What volume of a 0.2089 M KI solution contains enough KI to react exactly with the Cu(NO₃)₂ in 43.88 mL of a 0.3842 M solution of Cu(NO₃)₂? [latex]2\text{Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}+4\text{KI}\rightarrow 2\text{CuI}+{\text{I}}_{2}+4{\text{KNO}}_{3}[/latex]
A mordant is a substance that combines with a dye to produce a stable fixed color in a dyed fabric. Calcium acetate is used as a mordant. It is prepared by the reaction of acetic acid with calcium hydroxide.[latex]2{\text{CH}}_{3}{\text{CO}}_{2}\text{H}+\text{Ca}{\text{(}\text{OH}\text{)}}_{2}\rightarrow\text{Ca}{\text{(}{\text{CH}}_{3}{\text{CO}}_{2}\text{)}}_{2}+2{\text{H}}_{2}\text{O}[/latex] What mass of Ca(OH)₂ is required to react with the acetic acid in 25.0 mL of a solution having a density of 1.065 g/mL and containing 58.0% acetic acid by mass?
The toxic pigment called white lead, Pb₃(OH)₂(CO₃)₂, has been replaced in white paints by rutile, TiO₂. How much rutile (g) can be prepared from 379 g of an ore that contains 88.3% ilmenite (FeTiO₃) by mass?[latex]2{\text{FeTiO}}_{3}+4\text{HCl}+{\text{Cl}}_{2}\rightarrow 2{\text{FeCl}}_{3}+2{\text{TiO}}_{2}+2{\text{H}}_{2}\text{O}[/latex]

Show Selected Answers

2. The moles and the mass for each reaction are as follows:

0.435 mol Na, 0.271 mol Cl₂, 15.4 g Cl₂
0.005780 mol HgO, 2.890 × 10⁻³ mol O₂, 9.248 × 10⁻² g O₂
8.00 mol NaNO₃, 6.8 × 10² g NaNO₃
1665 mol CO₂, 73.3 kg CO₂
18.86 mol CuO, 2.330 kg CuCO₃
0.4580 mol C₂H₄Br₂, 86.05 g C₂H₄Br₂

4. The moles and the mass for each reaction are as follows:

[latex]\text{mol Mg}=5.00\cancel{\text{g HCl}}\times \frac{1\cancel{\text{mol HCl}}}{36.4606\cancel{\text{g}}}\times \frac{\text{1 mol Mg}}{2\cancel{\text{mol HCl}}}=0.0686\text{mol,}[/latex] [latex]\text{g Mg}=0.0686\cancel{\text{mol Mg}}\times \frac{\text{24.305 g}}{1\cancel{\text{mol Mg}}}=\text{1.67 g}[/latex]
[latex]{\text{mol O}}_{2}=1.252\cancel{\text{g}{\text{Ag}}_{2}\text{O}}\times \frac{1\cancel{\text{mol}{\text{Ag}}_{2}\text{O}}}{231.7358\cancel{\text{g}}}\times \frac{\text{1 mol}{\text{O}}_{2}}{2\cancel{\text{mol}{\text{Ag}}_{2}\text{O}}}=2.701\times {10}^{-3}[/latex], [latex]{\text{g O}}_{2}=2.701\times {10}^{-3}\cancel{{\text{mol O}}_{2}}\times \frac{\text{31.9988 g}}{1\cancel{\text{mol}{\text{O}}_{2}}}=0.08644\text{g}[/latex]
[latex]{\text{mol MgCO}}_{3}=283\cancel{\text{g}{\text{CO}}_{2}}\times \frac{1\cancel{\text{mol}{\text{CO}}_{2}}}{44.010\cancel{\text{g}}}\times \frac{\text{1 mol}{\text{MgCO}}_{3}}{1\cancel{\text{mol}{\text{CO}}_{2}}}=6.43\text{mol,}[/latex] [latex]{\text{g MgCO}}_{3}=6.43\cancel{{\text{mol MgCO}}_{3}}\times \frac{\text{84.314 g}}{1\cancel{{\text{mol MgCO}}_{3}}}=542\text{g}[/latex]
[latex]{\text{mol H}}_{2}\text{O}=2.00\times {10}^{4}\cancel{\text{g}{\text{C}}_{2}{\text{H}}_{4}}\times \frac{1\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{2}}}{28.054\cancel{\text{g}}}\times \frac{\text{1 mol}{\text{H}}_{2}\text{O}}{1\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{2}}}=713\text{mol,}[/latex] [latex]{\text{g H}}_{2}\text{O}=713\cancel{\text{mol}{\text{H}}_{2}\text{O}}\times \frac{18.01528\cancel{\text{g}}}{1\cancel{\text{mol}{\text{H}}_{2}\text{O}}}\times \frac{\text{1 kg}}{1000\cancel{\text{g}}}=\text{12.8 kg}[/latex]
[latex]2.500\cancel{\text{kg BaO}}\times \frac{1000\cancel{\text{g BaO}}}{1\cancel{\text{kg BaO}}}\times \frac{1\cancel{\text{mol BaO}}}{153.326\cancel{\text{g BaO}}}\times \frac{\text{2 mol}{\text{BaO}}_{2}}{2\cancel{\text{mol BaO}}}=\text{16.31 mol}{\text{BaO}}_{2}[/latex] [latex]16.31\cancel{\text{mol}{\text{BaO}}_{2}}\times \frac{\text{169.326 g}{\text{BaO}}_{2}}{1\cancel{\text{mol}{\text{BaO}}_{2}}}=\text{2762 g}{\text{BaO}}_{2}[/latex]
[latex]9.55\cancel{\text{g}{\text{C}}_{2}{\text{H}}_{6}\text{O}}\times \frac{1\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{6}\text{O}}}{46.068\cancel{\text{g}{\text{C}}_{2}{\text{H}}_{6}\text{O}}}\times \frac{\text{1 mol}{\text{C}}_{2}{\text{H}}_{4}}{1\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{6}\text{O}}}=\text{0.207 mol}{\text{C}}_{2}{\text{H}}_{4}[/latex] [latex]0.207\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{4}}\times \frac{\text{28.053 g}{\text{C}}_{2}{\text{H}}_{4}}{1\cancel{\text{mol}{\text{C}}_{2}{\text{H}}_{4}}}=\text{5.81 g}{\text{C}}_{2}{\text{H}}_{4}[/latex]

6. The answers are as follows:

[latex]\text{volume HCl solution}\rightarrow\text{mol HCl}\rightarrow{\text{mol GaCl}}_{3}[/latex]
[latex]2.6\cancel{\text{L HCl}}\times \frac{1.44\cancel{\text{mol HCl}}}{1\cancel{\text{L HCl}}}\times \frac{2\cancel{\text{mol}{\text{GaCl}}_{3}}}{6\cancel{\text{mol HCl}}}\times \frac{\text{180.079 g}{\text{GaCl}}_{3}}{1\cancel{\text{mol}{\text{GaCl}}_{3}}}=2.3\times {10}^{2}\text{g}{\text{GaCl}}_{3}[/latex]

8. The development requires the following: [latex]\text{mass K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]\rightarrow\text{mol K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]\rightarrow\text{mol Zn}{\text{(}\text{CN}\text{)}}_{2}\rightarrow\text{molecules of Zn}{\text{(}\text{CN}\text{)}}_{2}\text{g Zn}{\text{(}\text{CN}\text{)}}_{2};[/latex]

[latex]35.27\cancel{\text{g K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]}\times \frac{1\cancel{\text{mol K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]}}{199.002\cancel{\text{g K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]}}\times \frac{1\cancel{\text{mol Zn}{\text{(}\text{CN}\text{)}}_{2}}}{2\cancel{\text{mol K}\left[\text{Ag}{\text{(}\text{CN}\text{)}}_{2}\right]}}\times \frac{6.022\times {10}^{23}}{1\cancel{\text{mol Zn}{\text{(}\text{CN}\text{)}}_{2}}}=5.337\times {10}^{22}\text{molecules}[/latex]
[latex]5.337\times {10}^{22}\cancel{\text{molecules}}\times \frac{1\cancel{\text{mol Zn}{\text{(}\text{CN}\text{)}}_{2}}}{6.022\times {10}^{23}\cancel{\text{molecules}}}\times \frac{\text{117.43 g Zn}{\text{(}\text{CN}\text{)}}_{2}}{1\cancel{\text{mol Zn}{\text{(}\text{CN}\text{)}}_{2}}}=\text{10.41 g Zn}{\text{(}\text{CN}\text{)}}_{2}[/latex]

10. [latex]{\text{SiO}}_{2}+3\text{C}\rightarrow\text{SiC}+2\text{CO.}[/latex] From the balanced equation, 1 mol of SiO₂ produces 1 mol of SiC. The unknown is the mass of SiO₂ required to produce 3.00 kg (3000 g) of SiC. To calculate the mass of SiO₂ required, determine the molar masses of SiO₂ and SiC. Then calculate the number of moles of SiC required, and through the mole relation of SiO₂ to SiC, find the mass of SiO₂ required. The conversions required are:

[latex]\text{g SiC}\rightarrow\text{mol SiC}\rightarrow\text{mol}{\text{SiO}}_{2}\rightarrow\text{g}{\text{SiO}}_{2}[/latex]

Molar masses: SiO₂ = 60.0843 g mol^–1; SiC = 40.0955 g mol^–1

[latex]\text{mass SiO}2=3000\cancel{\text{g SiC}}\times \frac{1\cancel{\text{mol SiC}}}{40.955\cancel{\text{g SiC}}}\times \frac{1\cancel{\text{mol}{\text{SiO}}_{2}}}{1\cancel{\text{mol SiC}}}\times \frac{\text{60.843 g}{\text{SiO}}_{2}}{1\cancel{\text{mol}{\text{SiO}}_{2}}}=\text{4496 g}{\text{SiO}}_{2}=\text{4.50 kg}{\text{SiO}}_{2}[/latex]

12. Molar mass urea = 12.011 + 15.9994 + 2(14.0067) + 4(1.0079) = 60.054 g mol^–1

[latex]\text{1 mol C}\rightarrow 1{\text{mol CO}}_{2}\rightarrow 1\text{mol urea}[/latex]
[latex]\begin{array}{ll}\hfill \text{mass urea}& =1.00\times {10}^{3}\cancel{\text{kg}}\times \frac{1000\cancel{\text{g}}}{\cancel{\text{kg}}}\times \frac{1\cancel{\text{mol C}}}{12.0\cancel{\text{g C}}}\times \frac{1\cancel{\text{mol urea}}}{1\cancel{\text{mol C}}}\times \frac{\text{60.054 g urea}}{1\cancel{\text{mol urea}}}\\ & =5.00\times {10}^{6}\text{g or}5.00\times {10}^{3}\text{kg}\end{array}[/latex]

14. The balanced chemical equation is [latex]\text{C}\text{(}s\text{)}+{\text{O}}_{2}\text{(}g\text{)}\rightarrow{\text{CO}}_{2}\text{(}g\text{)}[/latex]

[latex]\begin{array}{l}500\cancel{\text{miles}}\times \frac{1\cancel{\text{gallon}}}{37.5\cancel{\text{miles}}}\times \frac{3.785\cancel{\text{L}}}{1\cancel{\text{gallon}}}\times \frac{1000\cancel{\text{mL}}}{1\cancel{\text{L}}}\times \frac{0.8205\cancel{\text{g gas}}}{1\cancel{\text{mL}}\text{gas}}\times \frac{84.2\cancel{\text{g C}}}{100\cancel{\text{g gas}}}\times \frac{1\cancel{\text{mol C}}}{12.01\cancel{\text{g C}}}\\ \times \frac{1\cancel{\text{mol}{\text{CO}}_{2}}}{1\cancel{\text{mol C}}}\times \frac{\text{44.01 g}{\text{CO}}_{2}}{1\cancel{\text{mol}{\text{CO}}_{2}}}=1.28\times {10}^{5}\text{g}{\text{CO}}_{2}\end{array}[/latex]

16. Use molarity to convert. This solution involves the following steps:

Converting the volume of KI to moles of KI
Converting the moles of KI to moles of Cu(NO₃)₂
Converting the moles of [latex]\text{K}\rightarrow\text{Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}[/latex] to a volume of KI. Cu(NO₃)₂ solution

[latex]\text{43.88 mL}\times \frac{\text{1 L}}{\text{1000 mL}}\times \frac{0.3842\cancel{\text{mol Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}}{\text{1 L}}\times \frac{4\cancel{\text{mol KI}}}{2\cancel{\text{mol Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}}\times \frac{\text{1 L KI}}{0.2089\cancel{\text{mol KI}}}=\text{161.4 mL}[/latex]

All of these steps can be shown together, as follows:

[latex]\frac{\text{43.88 mL Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}{1}\times \frac{\text{0.3842 mol Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}{\text{1000 mL Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}\times \frac{\text{4 mol KI}}{\text{2 mol Cu}{\text{(}{\text{NO}}_{3}\text{)}}_{2}}\times \frac{\text{1000 mL KI}}{\text{0.2089 mol KI}}=\text{161.40 mL KI solution}[/latex]

18. Find from worked example, check your learning problem

[latex]\text{mass of ilmenite}=379\cancel{\text{g ore}}\times \frac{\text{0.883 g}{\text{FeTiO}}_{3}}{1\cancel{\text{g ore}}}=\text{334.6 g}{\text{FeTiO}}_{3}[/latex]

[latex]\text{mass of rutile}=334.6\cancel{\text{g}{\text{FeTiO}}_{3}}\times \frac{1\cancel{\text{mol}{\text{FeTiO}}_{3}}}{151.7\cancel{\text{g}{\text{FeTiO}}_{3}}}\times \frac{2\cancel{\text{mol}{\text{TiO}}_{2}}}{2\cancel{\text{mol}{\text{FeTiO}}_{3}}}\times \frac{\text{79.88 g}{\text{TiO}}_{2}}{1\cancel{\text{mol}{\text{TiO}}_{2}}}=\text{176 g}{\text{TiO}}_{2}[/latex]

Glossary

stoichiometric factor: ratio of coefficients in a balanced chemical equation, used in computations relating amounts of reactants and products

stoichiometry: relationships between the amounts of reactants and products of a chemical reaction

Chapter 4: Stoichiometry of Chemical Reactions