Some important terminology to remember before we begin is as follows:

• integers: counting numbers like 1, 2, 3, etc., including negatives and zero
• real number: fractions, negative umbers, decimals, integers, and zero are all real numbers
• absolute value: a number’s distance from zero; it’s always positive.  [latex]|-7| = 7[/latex]
• sign: this refers to whether a number is positive or negative, we use [latex]+[/latex] for positive (to the right of zero on the number line) and [latex]-[/latex] for negative (to the left of zero on the number line)
• difference: the result of subtraction
• sum: the result of addition

The ability to work comfortably with negative numbers is essential to success in algebra. For this reason we will do a quick review of adding, subtracting, multiplying and dividing integers. Integers are all the positive whole numbers, zero, and their opposites (negatives). As this is intended to be a review of integers, the descriptions and examples will not be as detailed as a normal lesson.

Adding and Subtracting Real Numbers

When adding integers we have two cases to consider. The first case is whether the signs match (both positive or both negative). If the signs match, we will add the numbers together and keep the sign.

If the signs don’t match (one positive and one negative number) we will subtract the numbers (as if they were all positive) and then use the sign from the larger number. This means if the larger number is positive, the answer is positive. If the larger number is negative, the answer is negative.

Another way to think about subtracting is to think about the distance between the two numbers on the number line. In the example below, [latex]382[/latex] is to the right of 0 by [latex]382[/latex] units, and [latex]−93[/latex] is to the left of 0 by 93 units. The distance between them is the sum of their distances to 0: [latex]382+93[/latex].

The following video explains how to subtract two signed integers.

In the following video you will see an example of how to add three fractions with a common denominator that have different signs.

In the following video are examples of adding and subtracting decimals with different signs.

Multiplying and Dividing Real Numbers

Multiplication and division are inverse operations, just as addition and subtraction are. You may recall that when you divide fractions, you multiply by the reciprocal. Inverse operations “undo” each other.

Multiply Real Numbers

Multiplying real numbers is not that different from multiplying whole numbers and positive fractions. However, you haven’t learned what effect a negative sign has on the product.

With whole numbers, you can think of multiplication as repeated addition. Using the number line, you can make multiple jumps of a given size. For example, the following picture shows the product [latex]3\cdot4[/latex] as 3 jumps of 4 units each.

So to multiply [latex]3(−4)[/latex], you can face left (toward the negative side) and make three “jumps” forward (in a negative direction).

The product of a positive number and a negative number (or a negative and a positive) is negative.

The following video contains examples of how to multiply decimal numbers with different signs.

The following video shows examples of multiplying two signed fractions, including simplification of the answer.

To summarize:

• positive [latex]\cdot[/latex] positive: The product is positive.
• negative [latex]\cdot[/latex] negative: The product is positive.
• negative [latex]\cdot[/latex] positive: The product is negative.
• positive [latex]\cdot[/latex] negative: The product is negative.

You can see that the product of two negative numbers is a positive number. So, if you are multiplying more than two numbers, you can count the number of negative factors.

The following video contains examples of multiplying more than two signed integers.

Divide Real Numbers

You may remember that when you divided fractions, you multiplied by the reciprocal. Reciprocal is another name for the multiplicative inverse (just as opposite is another name for additive inverse).

An easy way to find the multiplicative inverse is to just “flip” the numerator and denominator as you did to find the reciprocal. Here are some examples:

• The reciprocal of [latex]\frac{4}{9}[/latex] is [latex] \frac{9}{4}[/latex]because [latex]\frac{4}{9}\left(\frac{9}{4}\right)=\frac{36}{36}=1[/latex].
• The reciprocal of 3 is [latex]\frac{1}{3}[/latex] because [latex]\frac{3}{1}\left(\frac{1}{3}\right)=\frac{3}{3}=1[/latex].
• The reciprocal of [latex]-\frac{5}{6}[/latex] is [latex]\frac{-6}{5}[/latex] because [latex]-\frac{5}{6}\left( -\frac{6}{5} \right)=\frac{30}{30}=1[/latex].
• The reciprocal of 1 is 1 as [latex]1(1)=1[/latex].

When you divided by positive fractions, you learned to multiply by the reciprocal. You also do this to divide real numbers.

Think about dividing a bag of 26 marbles into two smaller bags with the same number of marbles in each. You can also say each smaller bag has one half of the marbles.

[latex] 26\div 2=26\left( \frac{1}{2} \right)=13[/latex]

Notice that 2 and [latex] \frac{1}{2}[/latex] are reciprocals.

Try again, dividing a bag of 36 marbles into smaller bags.

Dividing by a number is the same as multiplying by its reciprocal. (That is, you use the reciprocal of the divisor, the second number in the division problem.)

Now let’s see what this means when one or more of the numbers is negative. A number and its reciprocal have the same sign. Since division is rewritten as multiplication using the reciprocal of the divisor, and taking the reciprocal doesn’t change any of the signs, division follows the same rules as multiplication.

The following video explains how to divide signed fractions.

Remember that a fraction bar also indicates division, so a negative sign in front of a fraction goes with the numerator, the denominator, or the whole fraction: [latex]-\frac{3}{4}=\frac{-3}{4}=\frac{3}{-4}[/latex].

In each case, the overall fraction is negative because there’s only one negative in the division.

The following video explains how to divide signed fractions.

Simplify Expressions With Real Numbers

Some important terminology before we begin:

• operations/operators: In mathematics we call things like multiplication, division, addition, and subtraction operations.  They are the verbs of the math world, doing work on numbers and variables. The symbols used to denote operations are called operators, such as [latex]+{, }-{, }\times{, }\div[/latex]. As you learn more math, you will learn more operators.
• term: Examples of terms would be [latex]2x[/latex] and [latex]-\frac{3}{2}[/latex] or [latex]a^3[/latex]. Even lone integers can be a term, like 0.
• expression: A mathematical expression is one that connects terms with mathematical operators. For example  [latex]\frac{1}{2}+\left(2^2\right)- 9\div\frac{6}{7}[/latex] is an expression.

Combining Like Terms

One way we can simplify expressions is to combine like terms. Like terms are terms where the variables match exactly (exponents included). Examples of like terms would be [latex]5xy[/latex] and [latex]-3xy[/latex] or [latex]8a^2b[/latex] and [latex]a^2b[/latex] or [latex]-3[/latex] and [latex]8[/latex].  If we have like terms we are allowed to add (or subtract) the numbers in front of the variables, then keep the variables the same. As we combine like terms we need to interpret subtraction signs as part of the following term. This means if we see a subtraction sign, we treat the following term like a negative term. The sign always stays with the term.

This is shown in the following examples:

In the following video you will be shown how to combine like terms using the idea of the distributive property.  Note that this is a different method than is shown in the written examples on this page, but it obtains the same result.

In the video that follows, you will be shown another example of combining like terms.  Pay attention to why you are not able to combine all three terms in the example.

Order of Operations

You may or may not recall the order of operations for applying several mathematical operations to one expression. Just as it is a social convention for us to drive on the right-hand side of the road, the order of operations is a set of conventions used to provide order when you are required to use several mathematical operations for one expression. The graphic below depicts the order in which mathematical operations are performed.

Order of operations

In the following example, you will be shown how to simplify an expression that contains both multiplication and subtraction using the order of operations.

When you are applying the order of operations to expressions that contain fractions, decimals, and negative numbers, you will need to recall how to do these computations as well.

In the following video you are shown how to use the order of operations to simplify an expression that contains multiplication, division, and subtraction with terms that contain fractions.

Exponents

When you are evaluating expressions, you will sometimes see exponents used to represent repeated multiplication. Recall that an expression such as [latex]7^{2}[/latex] is exponential notation for [latex]7\cdot7[/latex]. (Exponential notation has two parts: the base and the exponent or the power. In [latex]7^{2}[/latex], 7 is the base and 2 is the exponent; the exponent determines how many times the base is multiplied by itself.)

Exponents are a way to represent repeated multiplication; the order of operations places it before any other multiplication, division, subtraction, and addition is performed.

In the video that follows, an expression with exponents on its terms is simplified using the order of operations.

Grouping Symbols

Grouping symbols such as parentheses ( ), brackets [ ], braces[latex] \displaystyle \left\{ {} \right\}[/latex], and fraction bars can be used to further control the order of the four arithmetic operations. The rules of the order of operations require computation within grouping symbols to be completed first, even if you are adding or subtracting within the grouping symbols and you have multiplication outside the grouping symbols. After computing within the grouping symbols, divide or multiply from left to right and then subtract or add from left to right. When there are grouping symbols within grouping symbols, calculate from the inside to the outside. That is, begin simplifying within the innermost grouping symbols first.

Remember that parentheses can also be used to show multiplication. In the example that follows, both uses of parentheses—as a way to represent a group, as well as a way to express multiplication—are shown.

In the following video, you are shown how to use the order of operations to simplify an expression with grouping symbols, exponents, multiplication, and addition.

Simplify Compound Expressions With Real Numbers

In this section, we will use the skills from the last section to simplify mathematical expressions that contain many grouping symbols and many operations. We are using the term compound to describe expressions that have many operations and many grouping symbols. More care is needed with these expressions when you apply the order of operations. Additionally, you will see how to handle absolute value terms when you simplify expressions.

The video that follows contains an example similar to the written one above. Note how the numerator and denominator of the fraction are simplified separately.

The Distributive Property

Parentheses are used to group or combine expressions and terms in mathematics.  You may see them used when you are working with formulas, and when you are translating a real situation into a mathematical problem so you can find a quantitative solution.

Combo Meal Distributive Property

For example, you are on your way to hang out with your friends, and call them to ask if they want something from your favorite drive-through.  Three people want the same combo meal of 2 tacos and one drink.  You can use the distributive property to find out how many total tacos and how many total drinks you should take to them.

[latex]\begin{array}{c}\,\,\,3\left(2\text{ tacos }+ 1 \text{ drink}\right)\\=3\cdot{2}\text{ tacos }+3\text{ drinks }\\\,\,=6\text{ tacos }+3\text{ drinks }\end{array}[/latex]

The distributive property allows us to explicitly describe a total that is a result of a group of groups. In the case of the combo meals, we have three groups of ( two tacos plus one drink). The following definition describes how to use the distributive property in general terms.

To simplify  [latex]3\left(3+y\right)-y+9[/latex], it may help to see the expression translated into words:

multiply three by (the sum of three and y), then subtract y, then add 9

To multiply three by the sum of three and y, you use the distributive property –

[latex]\begin{array}{c}\,\,\,\,\,\,\,\,\,3\left(3+y\right)-y+9\\\,\,\,\,\,\,\,\,\,=\underbrace{3\cdot{3}}+\underbrace{3\cdot{y}}-y+9\\=9+3y-y+9\end{array}[/latex]

Now you can subtract y from 3y and add 9 to 9.

[latex]\begin{array}{c}9+3y-y+9\\=18+2y\end{array}[/latex]

The next example shows how to use the distributive property when one of the terms involved is negative.

Absolute Value

Absolute value expressions are one final method of grouping that you may see. Recall that the absolute value of a quantity is always positive or 0.

When you see an absolute value expression included within a larger expression, treat the absolute value like a grouping symbol and evaluate the expression within the absolute value sign first. Then take the absolute value of that expression. The example below shows how this is done.

The following video uses the order of operations to simplify an expression in fraction form that contains absolute value terms. Note how the absolute values are treated like parentheses and brackets when using the order of operations.