{"id":2120,"date":"2015-04-22T20:53:24","date_gmt":"2015-04-22T20:53:24","guid":{"rendered":"https:\/\/courses.candelalearning.com\/oschemtemp\/?post_type=chapter&#038;p=2120"},"modified":"2015-08-31T19:55:43","modified_gmt":"2015-08-31T19:55:43","slug":"non-ideal-gas-behavior-needs-formula","status":"publish","type":"chapter","link":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/chapter\/non-ideal-gas-behavior-needs-formula\/","title":{"raw":"Non-Ideal Gas Behavior","rendered":"Non-Ideal Gas Behavior"},"content":{"raw":"<div class=\"bcc-box bcc-highlight\">\r\n<h3>LEARNING OBJECTIVES<\/h3>\r\nBy the end of this section, you will be able to:\r\n<ul>\r\n\t<li>Describe the physical factors that lead to deviations from ideal gas behavior<\/li>\r\n\t<li>Explain how these factors are represented in the van der Waals equation<\/li>\r\n\t<li>Define compressibility (Z) and describe how its variation with pressure reflects non-ideal behavior<\/li>\r\n\t<li>Quantify non-ideal behavior by comparing computations of gas properties using the ideal gas law and the van der Waals equation<\/li>\r\n<\/ul>\r\n<\/div>\r\n<p id=\"fs-idm10764416\">Thus far, the ideal gas law, <em data-effect=\"italics\">PV = nRT<\/em>, has been applied to a variety of different types of problems, ranging from reaction stoichiometry and empirical and molecular formula problems to determining the density and molar mass of a gas. As mentioned in the previous modules of this chapter, however, the behavior of a gas is often non-ideal, meaning that the observed relationships between its pressure, volume, and temperature are not accurately described by the gas laws. In this section, the reasons for these deviations from ideal gas behavior are considered.<\/p>\r\n<p id=\"fs-idp138594304\">One way in which the accuracy of <em data-effect=\"italics\">PV = nRT<\/em> can be judged is by comparing the actual volume of 1 mole of gas (its molar volume, <em data-effect=\"italics\">V<\/em><sub>m<\/sub>) to the molar volume of an ideal gas at the same temperature and pressure. This ratio is called the <span data-type=\"term\"><strong>compressibility factor<\/strong>, <strong>Z<\/strong><\/span>, with:<\/p>\r\n\r\n<div id=\"fs-idp41001616\" data-type=\"equation\">[latex]\\text{Z}=\\frac{\\text{molar volume of gas at same}T\\text{and}P}{\\text{molar volume of ideal gas at same}T\\text{and}P}={\\left(\\frac{P{V}_{m}}{RT}\\right)}_{\\text{measured}}.[\/latex]<\/div>\r\n<p id=\"fs-idm92799184\">Ideal gas behavior is therefore indicated when this ratio is equal to 1, and any deviation from 1 is an indication of non-ideal behavior. Figure 1 shows plots of Z over a large pressure range for several common gases.<\/p>\r\n\r\n<figure id=\"CNX_Chem_09_06_ZvsPgraph\">\r\n\r\n[caption id=\"\" align=\"alignnone\" width=\"880\"]<img class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212111\/CNX_Chem_09_06_ZvsPgraph1.jpg\" alt=\"A graph is shown. The horizontal axis is labeled, \u201cP ( a t m ).\u201d Its scale begins at zero with markings provided by multiples of 200 up to 1000. The vertical axis is labeled, \u201cZ le( k P a ).\u201d This scale begins at zero and includes multiples of 0.5 up to 2.0. Six curves are drawn of varying colors. One of these curves is a horizontal, light purple line extending right from 1.0 k P a on the vertical axis, which is labeled \u201cIdeal gas.\u201d The region of the graph beneath this line is shaded tan. The remaining curves also start at the same point on the vertical axis. An orange line extends to the upper right corner of the graph, reaching a value of approximately 1.7 k P a at 1000 a t m. This orange curve is labeled, \u201cH subscript 2.\u201d A blue curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 200 a t m. This curve reaches a value of nearly 2.0 k P a at about 800 a t m. This curve is labeled, \u201cN subscript 2.\u201d A red curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 400 a t m. This curve reaches a value of nearly 1.5 k P a at about 750 a t m. This curve is labeled, \u201cO subscript 2.\u201d A purple curve dips below the horizontal ideal gas line, dipping even lower than the O subscript 2 curve initially, then increases to cross the ideal gas line at about 400 a t m. This curve reaches a value of nearly 2.0 k P a at about 850 a t m. This curve is labeled, \u201cC H subscript 4.\u201d A yellow curve dips below the horizontal ideal gas line, dipping lower than the other curves to a minimum of about 0.4 k P a at about 0.75 a t m, then increases to cross the ideal gas line at about 500 a t m. This curve reaches a value of about 1.6 k P a at about 900 a t m. This curve is labeled, \u201cC O subscript 2.\u201d\" width=\"880\" height=\"585\" data-media-type=\"image\/jpeg\" \/> Figure 1. A graph of the compressibility factor (Z) vs. pressure shows that gases can exhibit significant deviations from the behavior predicted by the ideal gas law.[\/caption]\r\n\r\n<\/figure>\r\n<p id=\"fs-idp70317840\">As is apparent from Figure 1, the ideal gas law does not describe gas behavior well at relatively high pressures. To determine why this is, consider the differences between real gas properties and what is expected of a hypothetical ideal gas.<\/p>\r\n<p id=\"fs-idp26015584\">Particles of a hypothetical ideal gas have no significant volume and do not attract or repel each other. In general, real gases approximate this behavior at relatively low pressures and high temperatures. However, at high pressures, the molecules of a gas are crowded closer together, and the amount of empty space between the molecules is reduced. At these higher pressures, the volume of the gas molecules themselves becomes appreciable relative to the total volume occupied by the gas (Figure 2). The gas therefore becomes less compressible at these high pressures, and although its volume continues to decrease with increasing pressure, this decrease is not <em data-effect=\"italics\">proportional<\/em> as predicted by Boyle\u2019s law.<\/p>\r\n\r\n<figure id=\"CNX_Chem_09_06_RealGas3\">\r\n\r\n[caption id=\"\" align=\"alignnone\" width=\"881\"]<img class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212112\/CNX_Chem_09_06_RealGas31.jpg\" alt=\"This figure includes three diagrams. In a, a cylinder with 9 purple spheres with trails indicating motion are shown. Above the cylinder, the label, \u201cParticles ideal gas,\u201d is connected to two of the spheres with line segments extending into the square. The label \u201cAssumes\u201d is beneath the square. In b, a cylinder and piston is shown. A relatively small open space is shaded lavender with 9 purple spheres packed close together. No motion trails are present on the spheres. Above the piston, a downward arrow labeled \u201cPressure\u201d is directed toward the enclosed area. In c, the cylinder is exactly the same as the first, but the number of molecules has doubled.\" width=\"881\" height=\"358\" data-media-type=\"image\/jpeg\" \/> Figure 2. Raising the pressure of a gas increases the fraction of its volume that is occupied by the gas molecules and makes the gas less compressible.[\/caption]\r\n\r\n<\/figure>\r\n<p id=\"fs-idp46559584\">At relatively low pressures, gas molecules have practically no attraction for one another because they are (on average) so far apart, and they behave almost like particles of an ideal gas. At higher pressures, however, the force of attraction is also no longer insignificant. This force pulls the molecules a little closer together, slightly decreasing the pressure (if the volume is constant) or decreasing the volume (at constant pressure) (Figure 3). This change is more pronounced at low temperatures because the molecules have lower KE relative to the attractive forces, and so they are less effective in overcoming these attractions after colliding with one another.<\/p>\r\n\r\n<figure id=\"CNX_Chem_09_06_RealGas2\">\r\n\r\n[caption id=\"\" align=\"alignnone\" width=\"880\"]<img class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212113\/CNX_Chem_09_06_RealGas21.jpg\" alt=\"This figure includes two diagrams. Each involves two lavender shaded boxes that contain 14 relatively evenly distributed, purple spheres. In the first box in a, a nearly centrally located purple sphere has 6 double-headed arrows extending outward from it to nearby spheres. A single purple arrow is pointing right into open space. This box is labeled, \u201creal.\u201d There is a second box that looks slightly larger than the first box in a. It has the same number of particles but no arrows. This box is labeled, \u201cideal.\u201d In b, the first box has a purple sphere at the right side which has 4 double-headed arrows radiating out to the top, bottom, and left to other spheres. A single purple arrow points right through open space to the edge of the box. This box has no spheres positioned near its right edge This box is labeled, \u201creal.\u201d The second box is the same size as the first box and contains the same number of particles. There are no arrows in it, except for the purple arrow which appears to be bigger and bolder. This box is labeled, \u201cideal.\u201d\" width=\"880\" height=\"327\" data-media-type=\"image\/jpeg\" \/> Figure 3. (a) Attractions between gas molecules serve to decrease the gas volume at constant pressure compared to an ideal gas whose molecules experience no attractive forces. (b) These attractive forces will decrease the force of collisions between the molecules and container walls, therefore reducing the pressure exerted compared to an ideal gas.[\/caption]\r\n\r\n<\/figure>\r\n<p id=\"fs-idm16170960\">There are several different equations that better approximate gas behavior than does the ideal gas law. The first, and simplest, of these was developed by the Dutch scientist Johannes van der Waals in 1879. The <strong><span data-type=\"term\">van der Waals equation<\/span><\/strong> improves upon the ideal gas law by adding two terms: one to account for the volume of the gas molecules and another for the attractive forces between them.<span id=\"fs-idm139964416\" data-type=\"media\" data-alt=\"This figure shows the equation P V equals n R T, with the P in blue text and the V in red text. This equation is followed by a right pointing arrow. Following this arrow, to the right in blue text appears the equation ( P minus a n superscript 2 divided by V squared ),\u201d which is followed by the red text ( V minus n b ). This is followed in black text with equals n R T. Beneath the second equation appears the label, \u201cCorrection for molecular attraction\u201d which is connected with a line segment to V squared. A second label, \u201cCorrection for volume of molecules,\u201d is similarly connected to n b which appears in red.\">\r\n<img class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212115\/CNX_Chem_09_06_vanderWaals_img1.jpg\" alt=\"This figure shows the equation P V equals n R T, with the P in blue text and the V in red text. This equation is followed by a right pointing arrow. Following this arrow, to the right in blue text appears the equation ( P minus a n superscript 2 divided by V squared ),\u201d which is followed by the red text ( V minus n b ). This is followed in black text with equals n R T. Beneath the second equation appears the label, \u201cCorrection for molecular attraction\u201d which is connected with a line segment to V squared. A second label, \u201cCorrection for volume of molecules,\u201d is similarly connected to n b which appears in red.\" width=\"880\" height=\"175\" data-media-type=\"image\/jpeg\" \/><\/span><\/p>\r\n<p id=\"fs-idm12594352\">The constant <em data-effect=\"italics\">a<\/em> corresponds to the strength of the attraction between molecules of a particular gas, and the constant <em data-effect=\"italics\">b<\/em> corresponds to the size of the molecules of a particular gas. The \u201ccorrection\u201d to the pressure term in the ideal gas law is [latex]\\frac{{n}^{2}a}{{V}^{2}},[\/latex] and the \u201ccorrection\u201d to the volume is <em data-effect=\"italics\">nb<\/em>. Note that when <em data-effect=\"italics\">V<\/em> is relatively large and <em data-effect=\"italics\">n<\/em> is relatively small, both of these correction terms become negligible, and the van der Waals equation reduces to the ideal gas law, <em data-effect=\"italics\">PV = nRT<\/em>. Such a condition corresponds to a gas in which a relatively low number of molecules is occupying a relatively large volume, that is, a gas at a relatively low pressure. Experimental values for the van der Waals constants of some common gases are given in Table 1.<\/p>\r\n\r\n<table id=\"fs-idm15100464\" summary=\"This table has three columns and seven rows. The first row is a header, and it labels each column, \u201cGas,\u201d \u201ca ( L to the second power a t m divided by m o l to the second power ),\u201d \u201cb ( L divided by m o l ).\u201d Under \u201cGas\u201d are the following: N subscript 2, O subscript 2, C O subscript 2, H subscript 2 O, H e, and C C l subscript 4. Under \u201ca ( L to the second power a t m divided by m o l to the second power )\u201d are the following: 1.39, 1.36, 3.59, 5.46, 0.0342, and 20.4. Under \u201cb ( L divided by m o l )\u201d are the following: 0.0391, 0.0318, 0.0427, 0.0305, 0.0237, and 0.1383.\">\r\n<thead>\r\n<tr>\r\n<th colspan=\"3\">Table 1. Values of van der Waals Constants for Some Common Gases<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr valign=\"top\">\r\n<th>Gas<\/th>\r\n<th><em data-effect=\"italics\">a<\/em> (L<sup>2<\/sup> atm\/mol<sup>2<\/sup>)<\/th>\r\n<th><em data-effect=\"italics\">b<\/em> (L\/mol)<\/th>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>N<sub>2<\/sub><\/td>\r\n<td>1.39<\/td>\r\n<td>0.0391<\/td>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>O<sub>2<\/sub><\/td>\r\n<td>1.36<\/td>\r\n<td>0.0318<\/td>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>CO<sub>2<\/sub><\/td>\r\n<td>3.59<\/td>\r\n<td>0.0427<\/td>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>H<sub>2<\/sub>O<\/td>\r\n<td>5.46<\/td>\r\n<td>0.0305<\/td>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>He<\/td>\r\n<td>0.0342<\/td>\r\n<td>0.0237<\/td>\r\n<\/tr>\r\n<tr valign=\"top\">\r\n<td>CCl<sub>4<\/sub><\/td>\r\n<td>20.4<\/td>\r\n<td>0.1383<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<p id=\"fs-idp95888368\">At low pressures, the correction for intermolecular attraction, <em data-effect=\"italics\">a<\/em>, is more important than the one for molecular volume, <em data-effect=\"italics\">b<\/em>. At high pressures and small volumes, the correction for the volume of the molecules becomes important, because the molecules themselves are incompressible and constitute an appreciable fraction of the total volume. At some intermediate pressure, the two corrections have opposing influences and the gas appears to follow the relationship given by <em data-effect=\"italics\">PV = nRT<\/em> over a small range of pressures. This behavior is reflected by the \u201cdips\u201d in several of the compressibility curves shown in Figure 9.35. The attractive force between molecules initially makes the gas more compressible than an ideal gas, as pressure is raised (Z decreases with increasing <em data-effect=\"italics\">P<\/em>). At very high pressures, the gas becomes less compressible (Z increases with <em data-effect=\"italics\">P<\/em>), as the gas molecules begin to occupy an increasingly significant fraction of the total gas volume.<\/p>\r\n<p id=\"fs-idp87631424\">Strictly speaking, the ideal gas equation functions well when intermolecular attractions between gas molecules are negligible and the gas molecules themselves do not occupy an appreciable part of the whole volume. These criteria are satisfied under conditions of <em data-effect=\"italics\">low pressure and high temperature<\/em>. Under such conditions, the gas is said to behave ideally, and deviations from the gas laws are small enough that they may be disregarded\u2014this is, however, very often not the case.<\/p>\r\n\r\n<div id=\"fs-idp133812128\" data-type=\"example\">\r\n<div class=\"textbox shaded\">\r\n<h3>Example 1<\/h3>\r\n<h4 id=\"fs-idm26240\"><strong><span data-type=\"title\">Comparison of Ideal Gas Law and van der Waals Equation<\/span><\/strong><\/h4>\r\nA 4.25-L flask contains 3.46 mol CO<sub>2<\/sub> at 229 \u00b0C. Calculate the pressure of this sample of CO<sub>2<\/sub>:\r\n<p id=\"fs-idm66840432\">(a) from the ideal gas law<\/p>\r\n<p id=\"fs-idp5462416\">(b) from the van der Waals equation<\/p>\r\n<p id=\"fs-idm139915872\">(c) Explain the reason(s) for the difference.<\/p>\r\n\r\n<h4 id=\"fs-idp71956336\"><span data-type=\"title\">Solution<\/span><\/h4>\r\n(a) From the ideal gas law:\r\n<div id=\"fs-idm23230176\" data-type=\"equation\">[latex]P=\\frac{nRT}{V}=\\frac{3.46\\cancel{\\text{mol}}\\times 0.08206\\cancel{\\text{L}}\\text{atm}\\cancel{{\\text{mol}}^{\\text{-1}}}\\cancel{{\\text{K}}^{\\text{-1}}}\\times 502\\cancel{\\text{K}}}{4.25\\cancel{\\text{L}}}=33.5\\text{atm}[\/latex]<\/div>\r\n<p id=\"fs-idp14703728\">(b) From the van der Waals equation:<\/p>\r\n\r\n<div id=\"fs-idm122220784\" data-type=\"equation\">[latex]\\left(P+\\frac{{n}^{2}a}{{V}^{2}}\\right)\\times \\left(V-nb\\right)=nRT\\rightarrow P=\\frac{nRT}{\\left(V-nb\\right)}-\\frac{{n}^{2}a}{{V}^{2}}[\/latex]<\/div>\r\n<div id=\"fs-idp204240560\" data-type=\"equation\">[latex]P=\\frac{3.46\\text{mol}\\times 0.08206\\text{L}\\text{atm}{\\text{mol}}^{\\text{-1}}{\\text{K}}^{\\text{-1}}\\times \\text{502 K}}{\\left(4.25\\text{L}-3.46\\text{mol}\\times 0.0427\\text{L}{\\text{mol}}^{\\text{-1}}\\right)}-\\frac{{\\left(3.46\\text{mol}\\right)}^{2}\\times 3.59{\\text{L}}^{2}\\text{atm}{\\text{mol}}^{2}}{{\\left(4.25\\text{L}\\right)}^{2}}[\/latex]<\/div>\r\n<p id=\"fs-idp24938016\">This finally yields <em data-effect=\"italics\">P<\/em> = 32.4 atm.<\/p>\r\n<p id=\"fs-idp70504128\">(c) This is not very different from the value from the ideal gas law, because the pressure is not very high and the temperature is not very low. The value is somewhat different because CO<sub>2<\/sub> molecules do have some volume and attractions between molecules, and the ideal gas law assumes they do not have volume or attractions.<\/p>\r\n\r\n<h4 id=\"fs-idp8228960\"><strong><span data-type=\"title\">Check your Learning<\/span><\/strong><\/h4>\r\nA 560-mL flask contains 21.3 g N<sub>2<\/sub> at 145 \u00b0C. Calculate the pressure of N<sub>2<\/sub>:\r\n<p id=\"fs-idm52984064\">(a) from the ideal gas law<\/p>\r\n<p id=\"fs-idp68055984\">(b) from the van der Waals equation<\/p>\r\n<p id=\"fs-idm24430976\">(c) Explain the reason(s) for the difference.<\/p>\r\n\r\n<div id=\"fs-idm71592544\" data-type=\"note\">\r\n<div data-type=\"title\"><\/div>\r\n<div style=\"text-align: right;\" data-type=\"title\"><strong>Answer<\/strong>:\u00a0(a) 46.562 atm; (b) 46.594 atm; (c) The van der Waals equation takes into account the volume of the gas molecules themselves as well as intermolecular attractions.<\/div>\r\n<\/div>\r\n<\/div>\r\n<div class=\"bcc-box bcc-success\">\r\n<h2>Key Concepts and Summary<\/h2>\r\n<section>\r\n<div data-type=\"note\">\r\n<p id=\"fs-idp236281408\">Gas molecules possess a finite volume and experience forces of attraction for one another. Consequently, gas behavior is not necessarily described well by the ideal gas law. Under conditions of low pressure and high temperature, these factors are negligible, the ideal gas equation is an accurate description of gas behavior, and the gas is said to exhibit ideal behavior. However, at lower temperatures and higher pressures, corrections for molecular volume and molecular attractions are required to account for finite molecular size and attractive forces. The van der Waals equation is a modified version of the ideal gas law that can be used to account for the non-ideal behavior of gases under conditions.<\/p>\r\n\r\n<\/div>\r\n<\/section><\/div>\r\n<div class=\"bcc-box bcc-success\">\r\n<h3>Key Equations<\/h3>\r\n<section>\r\n<div data-type=\"note\">\r\n<ul>\r\n\t<li>[latex]\\text{Z}=\\frac{\\text{molar}\\text{volume of gas at same}T\\text{and}P}{\\text{molar volume of ideal gas at same}T\\text{and}P}={\\left(\\frac{P\\times {V}_{m}}{R\\times T}\\right)}_{\\text{measured}}[\/latex]<\/li>\r\n\t<li>[latex]\\left(P+\\frac{{n}^{2}a}{{V}^{2}}\\right)\\times \\left(V-nb\\right)=nRT[\/latex]<\/li>\r\n<\/ul>\r\n<\/div>\r\n<\/section><\/div>\r\n<section id=\"fs-idm40478192\" class=\"summary\" data-depth=\"1\">\r\n<div id=\"post-355\" class=\"post-355 chapter type-chapter status-publish hentry type-1\">\r\n<div class=\"entry-content\">\r\n<div class=\"im_section\">\r\n<div class=\"im_section\">\r\n<div id=\"mclean-ch03_s01_s02_n01\" class=\"im_key_takeaways im_editable im_block\">\r\n<div class=\"bcc-box bcc-info\">\r\n<h3>Chemistry End of Chapter Exercises<\/h3>\r\n<section id=\"fs-idp25013184\" class=\"exercises\" data-depth=\"1\">\r\n<div id=\"fs-idm14870688\" data-type=\"exercise\">\r\n<div id=\"fs-idp141055504\" data-type=\"problem\">\r\n<ol>\r\n\t<li id=\"fs-idm139673280\">Graphs showing the behavior of several different gases follow. Which of these gases exhibit behavior significantly different from that expected for ideal gases?\r\n<img class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212116\/CNX_Chem_09_06_Exercise1_img1.jpg\" alt=\"This figure includes 6 graphs. The first, which is labeled, \u201cGas A,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cVolume.\u201d A straight blue line segment extends from the lower left to the upper right of this graph. The open area in the lower right portion of the graph contains the label, \u201cn, P constant.\u201d The second, which is labeled, \u201cGas B,\u201d has a horizontal axis labeled, \u201cP,\u201d and a vertical axis labeled, \u201cP V.\u201d A straight blue line segment extends horizontally across the center of this graph. The open area in the lower right portion of the graph contains the label, \u201cn, T constant.\u201d The third, which is labeled, \u201cGas C,\u201d has a horizontal axis labeled,\u201cP V divided by R T,\u201d and a vertical axis labeled, \u201cMoles.\u201d A blue curve begins about halfway up the vertical axis, dips slightly, then increases steadily to the upper right region of the graph. The fourth, which is labeled, \u201cGas D,\u201d has a horizontal axis labeled, \u201cP V divided by R T,\u201d and a vertical axis labeled, \u201cMoles.\u201d A straight blue line segment extends horizontally across the center of this graph. The open area in the lower right portion of the graph contains the label \u201cn, P constant.\u201d The fifth, which is labeled, \u201cGas E,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cVolume.\u201d A blue curve extends from the lower left to the upper right of this graph. The open area in the lower right portion of the graph contains the label \u201cn, P constant.\u201d The sixth graph, which is labeled, \u201cGas F,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cPressure.\u201d A blue curve begins toward the lower left region of the graph, increases at a rapid rate, then continues to increase at a relatively slow rate moving left to right across the graph. The open area in the lower right portion of the graph contains the label, \u201cn, V constant.\u201d\" width=\"840\" height=\"913\" data-media-type=\"image\/jpeg\" \/><\/li>\r\n\t<li>Explain why the plot of <em data-effect=\"italics\">PV<\/em> for CO<sub>2<\/sub> differs from that of an ideal gas.<img src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212118\/CNX_Chem_09_06_RealGases1.jpg\" alt=\"A graph is shown. The horizontal axis is labeled, \u201cP ( a t m ).\u201d Its scale is marked at 0, 1, and 2. The vertical axis is labeled, \u201cP V ( a t m L ).\u201d This scale includes markings at 0, 22.4, 22.5, and 22.6. Two curves and two lines are drawn of varying colors. One line is a horizontal, blue line extending right from about 22.42 a t m L on the vertical axis, and is labeled, \u201cIdeal gas.\u201d The remaining two curves and one line start at the same point on the vertical axis. A green line extends up and to the right slightly on the graph, reaching a value of approximately 22.46 a t m L at 2 a t m. This green line is labeled, \u201cH e.\u201d An orange curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 1 a t m. This curve reaches a value of about 22.52 a t m L at 2 a t m. This curve is labeled, \u201cC H subscript 4.\u201d A purple curve dips below the horizontal ideal gas line initially, then increases to cross the line at about 0.8 a t m. This curve reaches a value of nearly 22.62 a t m L at nearly 1.2 a t m. This curve is labeled, \u201cC O subscript 2.\u201d\" data-media-type=\"image\/jpeg\" \/><\/li>\r\n\t<li>Under which of the following sets of conditions does a real gas behave most like an ideal gas, and for which conditions is a real gas expected to deviate from ideal behavior? Explain.\r\n<ol>\r\n\t<li>high pressure, small volume<\/li>\r\n\t<li>high temperature, low pressure<\/li>\r\n\t<li>low temperature, high pressure<\/li>\r\n<\/ol>\r\n<\/li>\r\n\t<li>Describe the factors responsible for the deviation of the behavior of real gases from that of an ideal gas.<\/li>\r\n\t<li>For which of the following gases should the correction for the molecular volume be largest: CO, CO<sub>2<\/sub>, H<sub>2<\/sub>, He, NH<sub>3<\/sub>, SF<sub>6<\/sub>?<\/li>\r\n\t<li>A 0.245-L flask contains 0.467 mol CO<sub>2<\/sub> at 159 \u00b0C. Calculate the pressure:\r\n<ol>\r\n\t<li>using the ideal gas law<\/li>\r\n\t<li>using the van der Waals equation<\/li>\r\n\t<li>Explain the reason for the difference.<\/li>\r\n\t<li>Identify which correction (that for P or V) is dominant and why.<\/li>\r\n<\/ol>\r\n<\/li>\r\n\t<li>Answer the following questions:\r\n<ol>\r\n\t<li>If XX behaved as an ideal gas, what would its graph of Z vs. P look like?<\/li>\r\n\t<li>For most of this chapter, we performed calculations treating gases as ideal. Was this justified?<\/li>\r\n\t<li>What is the effect of the volume of gas molecules on Z? Under what conditions is this effect small? When is it large? Explain using an appropriate diagram.<\/li>\r\n\t<li>What is the effect of intermolecular attractions on the value of Z? Under what conditions is this effect small? When is it large? Explain using an appropriate diagram.<\/li>\r\n\t<li>In general, under what temperature conditions would you expect Z to have the largest deviations from the Z for an ideal gas?<\/li>\r\n<\/ol>\r\n<\/li>\r\n<\/ol>\r\n<\/div>\r\n<\/div>\r\n<\/section><\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<div id=\"post-355\" class=\"post-355 chapter type-chapter status-publish hentry type-1\">\r\n<div class=\"entry-content\">\r\n<div class=\"im_section\">\r\n<div class=\"im_section\">\r\n<div id=\"mclean-ch03_s01_s02_n01\" class=\"im_key_takeaways im_editable im_block\">\r\n<div class=\"bcc-box bcc-info\">\r\n<h4>Selected Answers<\/h4>\r\n1.\u00a0Gas A: volume increases linearly as temperature increases with moles and pressure held constant, as expected by the ideal gas law <em data-effect=\"italics\">V<\/em> = (<em data-effect=\"italics\"><strong data-effect=\"bold\">nR\/P<\/strong><\/em>)<em data-effect=\"italics\">T<\/em>; Gas B: <em data-effect=\"italics\">PV<\/em> stays constant as pressure increases with moles and temperature held constant, as expected by the ideal gas law <em data-effect=\"italics\">PV<\/em> = <strong data-effect=\"bold\">n<em data-effect=\"italics\">RT<\/em><\/strong>; Gas C: compressibility factor (Z) varies as <em data-effect=\"italics\">PV<\/em>\/<em data-effect=\"italics\">RT<\/em> increases, as expected of a real gas; Gas D: compressibility factor (Z) stays constant as <em data-effect=\"italics\">PV<\/em>\/<em data-effect=\"italics\">RT<\/em> increases with moles and pressure held constant, as expected of an ideal gas; Gas E: as temperature increases, volume increases, but not linearly with moles and pressure held constant, as would <strong data-effect=\"bold\">not<\/strong> be expected by the ideal gas law <em data-effect=\"italics\">V<\/em> = (<strong data-effect=\"bold\"><em data-effect=\"italics\">nR<\/em>\/<em data-effect=\"italics\">P<\/em><\/strong>)<em data-effect=\"italics\">T,<\/em> as seen in Gas A; Gas F: as temperature increases, pressure increases with moles and volume held constant, but not linearly, as would <strong data-effect=\"bold\">not<\/strong> be expected by the ideal gas law <em data-effect=\"italics\">P<\/em> = (<strong data-effect=\"bold\"><em data-effect=\"italics\">nR<\/em>\/<em data-effect=\"italics\">V<\/em><\/strong>)<em data-effect=\"italics\">T,<\/em> as seen in Gas A; Gases C, E, and F exhibit behavior significantly different from that expected for an ideal gas.\r\n\r\n3.\u00a0The gas behavior most like an ideal gas will occur under the conditions in (b). Molecules have high speeds and move through greater distances between collision; they also have shorter contact times and interactions are less likely. Deviations occur with the conditions described in (a) and (c). Under conditions of (a), some gases may liquefy. Under conditions of (c), most gases will liquefy.\r\n\r\n5. We would expect the molecule with the largest volume to need the largest correction. SF<sub>6<\/sub> would need the largest correction.\r\n<p data-type=\"newline\">7. (a) A straight horizontal line at 1.0;<\/p>\r\n<p data-type=\"newline\">(b) When real gases are at low pressures and high temperatures they behave close enough to ideal gases that they are approximated as such, however, in some cases, we see that at a high pressure and temperature, the ideal gas approximation breaks down and is significantly different from the pressure calculated by the van der Waals equation<\/p>\r\n<p data-type=\"newline\">(c) The greater the compressibility, the more the volume matters. At low pressures, the correction factor for intermolecular attractions is more significant, and the effect of the volume of the gas molecules on Z would be a small lowering compressibility. At higher pressures, the effect of the volume of the gas molecules themselves on Z would increase compressibility (see Figure 1)<\/p>\r\n<p data-type=\"newline\">(d) Once again, at low pressures, the effect of intermolecular attractions on Z would be more important than the correction factor for the volume of the gas molecules themselves, though perhaps still small. At higher pressures and low temperatures, the effect of intermolecular attractions would be larger. See Figure 1.<\/p>\r\n<p data-type=\"newline\">(e) low temperatures<\/p>\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/section>\r\n<div class=\"bcc-box bcc-success\"><section id=\"glossary\">\r\n<h3>Glossary<\/h3>\r\n<div data-type=\"definition\">\r\n<div id=\"fs-idm8143856\" data-type=\"definition\">\r\n<div data-type=\"glossary\">\r\n<p data-type=\"definition\"><strong><span data-type=\"term\">compressibility factor (Z)\r\n<\/span><\/strong>ratio of the experimentally measured molar volume for a gas to its molar volume as computed from the ideal gas equation<\/p>\r\n<p data-type=\"definition\"><strong><span data-type=\"term\">van der Waals equation\r\n<\/span><\/strong>modified version of the ideal gas equation containing additional terms to account for non-ideal gas behavior<\/p>\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/section><\/div>\r\n<\/div>","rendered":"<div class=\"bcc-box bcc-highlight\">\n<h3>LEARNING OBJECTIVES<\/h3>\n<p>By the end of this section, you will be able to:<\/p>\n<ul>\n<li>Describe the physical factors that lead to deviations from ideal gas behavior<\/li>\n<li>Explain how these factors are represented in the van der Waals equation<\/li>\n<li>Define compressibility (Z) and describe how its variation with pressure reflects non-ideal behavior<\/li>\n<li>Quantify non-ideal behavior by comparing computations of gas properties using the ideal gas law and the van der Waals equation<\/li>\n<\/ul>\n<\/div>\n<p id=\"fs-idm10764416\">Thus far, the ideal gas law, <em data-effect=\"italics\">PV = nRT<\/em>, has been applied to a variety of different types of problems, ranging from reaction stoichiometry and empirical and molecular formula problems to determining the density and molar mass of a gas. As mentioned in the previous modules of this chapter, however, the behavior of a gas is often non-ideal, meaning that the observed relationships between its pressure, volume, and temperature are not accurately described by the gas laws. In this section, the reasons for these deviations from ideal gas behavior are considered.<\/p>\n<p id=\"fs-idp138594304\">One way in which the accuracy of <em data-effect=\"italics\">PV = nRT<\/em> can be judged is by comparing the actual volume of 1 mole of gas (its molar volume, <em data-effect=\"italics\">V<\/em><sub>m<\/sub>) to the molar volume of an ideal gas at the same temperature and pressure. This ratio is called the <span data-type=\"term\"><strong>compressibility factor<\/strong>, <strong>Z<\/strong><\/span>, with:<\/p>\n<div id=\"fs-idp41001616\" data-type=\"equation\">[latex]\\text{Z}=\\frac{\\text{molar volume of gas at same}T\\text{and}P}{\\text{molar volume of ideal gas at same}T\\text{and}P}={\\left(\\frac{P{V}_{m}}{RT}\\right)}_{\\text{measured}}.[\/latex]<\/div>\n<p id=\"fs-idm92799184\">Ideal gas behavior is therefore indicated when this ratio is equal to 1, and any deviation from 1 is an indication of non-ideal behavior. Figure 1 shows plots of Z over a large pressure range for several common gases.<\/p>\n<figure id=\"CNX_Chem_09_06_ZvsPgraph\">\n<div style=\"width: 890px\" class=\"wp-caption alignnone\"><img loading=\"lazy\" decoding=\"async\" class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212111\/CNX_Chem_09_06_ZvsPgraph1.jpg\" alt=\"A graph is shown. The horizontal axis is labeled, \u201cP ( a t m ).\u201d Its scale begins at zero with markings provided by multiples of 200 up to 1000. The vertical axis is labeled, \u201cZ le( k P a ).\u201d This scale begins at zero and includes multiples of 0.5 up to 2.0. Six curves are drawn of varying colors. One of these curves is a horizontal, light purple line extending right from 1.0 k P a on the vertical axis, which is labeled \u201cIdeal gas.\u201d The region of the graph beneath this line is shaded tan. The remaining curves also start at the same point on the vertical axis. An orange line extends to the upper right corner of the graph, reaching a value of approximately 1.7 k P a at 1000 a t m. This orange curve is labeled, \u201cH subscript 2.\u201d A blue curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 200 a t m. This curve reaches a value of nearly 2.0 k P a at about 800 a t m. This curve is labeled, \u201cN subscript 2.\u201d A red curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 400 a t m. This curve reaches a value of nearly 1.5 k P a at about 750 a t m. This curve is labeled, \u201cO subscript 2.\u201d A purple curve dips below the horizontal ideal gas line, dipping even lower than the O subscript 2 curve initially, then increases to cross the ideal gas line at about 400 a t m. This curve reaches a value of nearly 2.0 k P a at about 850 a t m. This curve is labeled, \u201cC H subscript 4.\u201d A yellow curve dips below the horizontal ideal gas line, dipping lower than the other curves to a minimum of about 0.4 k P a at about 0.75 a t m, then increases to cross the ideal gas line at about 500 a t m. This curve reaches a value of about 1.6 k P a at about 900 a t m. This curve is labeled, \u201cC O subscript 2.\u201d\" width=\"880\" height=\"585\" data-media-type=\"image\/jpeg\" \/><\/p>\n<p class=\"wp-caption-text\">Figure 1. A graph of the compressibility factor (Z) vs. pressure shows that gases can exhibit significant deviations from the behavior predicted by the ideal gas law.<\/p>\n<\/div>\n<\/figure>\n<p id=\"fs-idp70317840\">As is apparent from Figure 1, the ideal gas law does not describe gas behavior well at relatively high pressures. To determine why this is, consider the differences between real gas properties and what is expected of a hypothetical ideal gas.<\/p>\n<p id=\"fs-idp26015584\">Particles of a hypothetical ideal gas have no significant volume and do not attract or repel each other. In general, real gases approximate this behavior at relatively low pressures and high temperatures. However, at high pressures, the molecules of a gas are crowded closer together, and the amount of empty space between the molecules is reduced. At these higher pressures, the volume of the gas molecules themselves becomes appreciable relative to the total volume occupied by the gas (Figure 2). The gas therefore becomes less compressible at these high pressures, and although its volume continues to decrease with increasing pressure, this decrease is not <em data-effect=\"italics\">proportional<\/em> as predicted by Boyle\u2019s law.<\/p>\n<figure id=\"CNX_Chem_09_06_RealGas3\">\n<div style=\"width: 891px\" class=\"wp-caption alignnone\"><img loading=\"lazy\" decoding=\"async\" class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212112\/CNX_Chem_09_06_RealGas31.jpg\" alt=\"This figure includes three diagrams. In a, a cylinder with 9 purple spheres with trails indicating motion are shown. Above the cylinder, the label, \u201cParticles ideal gas,\u201d is connected to two of the spheres with line segments extending into the square. The label \u201cAssumes\u201d is beneath the square. In b, a cylinder and piston is shown. A relatively small open space is shaded lavender with 9 purple spheres packed close together. No motion trails are present on the spheres. Above the piston, a downward arrow labeled \u201cPressure\u201d is directed toward the enclosed area. In c, the cylinder is exactly the same as the first, but the number of molecules has doubled.\" width=\"881\" height=\"358\" data-media-type=\"image\/jpeg\" \/><\/p>\n<p class=\"wp-caption-text\">Figure 2. Raising the pressure of a gas increases the fraction of its volume that is occupied by the gas molecules and makes the gas less compressible.<\/p>\n<\/div>\n<\/figure>\n<p id=\"fs-idp46559584\">At relatively low pressures, gas molecules have practically no attraction for one another because they are (on average) so far apart, and they behave almost like particles of an ideal gas. At higher pressures, however, the force of attraction is also no longer insignificant. This force pulls the molecules a little closer together, slightly decreasing the pressure (if the volume is constant) or decreasing the volume (at constant pressure) (Figure 3). This change is more pronounced at low temperatures because the molecules have lower KE relative to the attractive forces, and so they are less effective in overcoming these attractions after colliding with one another.<\/p>\n<figure id=\"CNX_Chem_09_06_RealGas2\">\n<div style=\"width: 890px\" class=\"wp-caption alignnone\"><img loading=\"lazy\" decoding=\"async\" class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212113\/CNX_Chem_09_06_RealGas21.jpg\" alt=\"This figure includes two diagrams. Each involves two lavender shaded boxes that contain 14 relatively evenly distributed, purple spheres. In the first box in a, a nearly centrally located purple sphere has 6 double-headed arrows extending outward from it to nearby spheres. A single purple arrow is pointing right into open space. This box is labeled, \u201creal.\u201d There is a second box that looks slightly larger than the first box in a. It has the same number of particles but no arrows. This box is labeled, \u201cideal.\u201d In b, the first box has a purple sphere at the right side which has 4 double-headed arrows radiating out to the top, bottom, and left to other spheres. A single purple arrow points right through open space to the edge of the box. This box has no spheres positioned near its right edge This box is labeled, \u201creal.\u201d The second box is the same size as the first box and contains the same number of particles. There are no arrows in it, except for the purple arrow which appears to be bigger and bolder. This box is labeled, \u201cideal.\u201d\" width=\"880\" height=\"327\" data-media-type=\"image\/jpeg\" \/><\/p>\n<p class=\"wp-caption-text\">Figure 3. (a) Attractions between gas molecules serve to decrease the gas volume at constant pressure compared to an ideal gas whose molecules experience no attractive forces. (b) These attractive forces will decrease the force of collisions between the molecules and container walls, therefore reducing the pressure exerted compared to an ideal gas.<\/p>\n<\/div>\n<\/figure>\n<p id=\"fs-idm16170960\">There are several different equations that better approximate gas behavior than does the ideal gas law. The first, and simplest, of these was developed by the Dutch scientist Johannes van der Waals in 1879. The <strong><span data-type=\"term\">van der Waals equation<\/span><\/strong> improves upon the ideal gas law by adding two terms: one to account for the volume of the gas molecules and another for the attractive forces between them.<span id=\"fs-idm139964416\" data-type=\"media\" data-alt=\"This figure shows the equation P V equals n R T, with the P in blue text and the V in red text. This equation is followed by a right pointing arrow. Following this arrow, to the right in blue text appears the equation ( P minus a n superscript 2 divided by V squared ),\u201d which is followed by the red text ( V minus n b ). This is followed in black text with equals n R T. Beneath the second equation appears the label, \u201cCorrection for molecular attraction\u201d which is connected with a line segment to V squared. A second label, \u201cCorrection for volume of molecules,\u201d is similarly connected to n b which appears in red.\"><br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212115\/CNX_Chem_09_06_vanderWaals_img1.jpg\" alt=\"This figure shows the equation P V equals n R T, with the P in blue text and the V in red text. This equation is followed by a right pointing arrow. Following this arrow, to the right in blue text appears the equation ( P minus a n superscript 2 divided by V squared ),\u201d which is followed by the red text ( V minus n b ). This is followed in black text with equals n R T. Beneath the second equation appears the label, \u201cCorrection for molecular attraction\u201d which is connected with a line segment to V squared. A second label, \u201cCorrection for volume of molecules,\u201d is similarly connected to n b which appears in red.\" width=\"880\" height=\"175\" data-media-type=\"image\/jpeg\" \/><\/span><\/p>\n<p id=\"fs-idm12594352\">The constant <em data-effect=\"italics\">a<\/em> corresponds to the strength of the attraction between molecules of a particular gas, and the constant <em data-effect=\"italics\">b<\/em> corresponds to the size of the molecules of a particular gas. The \u201ccorrection\u201d to the pressure term in the ideal gas law is [latex]\\frac{{n}^{2}a}{{V}^{2}},[\/latex] and the \u201ccorrection\u201d to the volume is <em data-effect=\"italics\">nb<\/em>. Note that when <em data-effect=\"italics\">V<\/em> is relatively large and <em data-effect=\"italics\">n<\/em> is relatively small, both of these correction terms become negligible, and the van der Waals equation reduces to the ideal gas law, <em data-effect=\"italics\">PV = nRT<\/em>. Such a condition corresponds to a gas in which a relatively low number of molecules is occupying a relatively large volume, that is, a gas at a relatively low pressure. Experimental values for the van der Waals constants of some common gases are given in Table 1.<\/p>\n<table id=\"fs-idm15100464\" summary=\"This table has three columns and seven rows. The first row is a header, and it labels each column, \u201cGas,\u201d \u201ca ( L to the second power a t m divided by m o l to the second power ),\u201d \u201cb ( L divided by m o l ).\u201d Under \u201cGas\u201d are the following: N subscript 2, O subscript 2, C O subscript 2, H subscript 2 O, H e, and C C l subscript 4. Under \u201ca ( L to the second power a t m divided by m o l to the second power )\u201d are the following: 1.39, 1.36, 3.59, 5.46, 0.0342, and 20.4. Under \u201cb ( L divided by m o l )\u201d are the following: 0.0391, 0.0318, 0.0427, 0.0305, 0.0237, and 0.1383.\">\n<thead>\n<tr>\n<th colspan=\"3\">Table 1. Values of van der Waals Constants for Some Common Gases<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr valign=\"top\">\n<th>Gas<\/th>\n<th><em data-effect=\"italics\">a<\/em> (L<sup>2<\/sup> atm\/mol<sup>2<\/sup>)<\/th>\n<th><em data-effect=\"italics\">b<\/em> (L\/mol)<\/th>\n<\/tr>\n<tr valign=\"top\">\n<td>N<sub>2<\/sub><\/td>\n<td>1.39<\/td>\n<td>0.0391<\/td>\n<\/tr>\n<tr valign=\"top\">\n<td>O<sub>2<\/sub><\/td>\n<td>1.36<\/td>\n<td>0.0318<\/td>\n<\/tr>\n<tr valign=\"top\">\n<td>CO<sub>2<\/sub><\/td>\n<td>3.59<\/td>\n<td>0.0427<\/td>\n<\/tr>\n<tr valign=\"top\">\n<td>H<sub>2<\/sub>O<\/td>\n<td>5.46<\/td>\n<td>0.0305<\/td>\n<\/tr>\n<tr valign=\"top\">\n<td>He<\/td>\n<td>0.0342<\/td>\n<td>0.0237<\/td>\n<\/tr>\n<tr valign=\"top\">\n<td>CCl<sub>4<\/sub><\/td>\n<td>20.4<\/td>\n<td>0.1383<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p id=\"fs-idp95888368\">At low pressures, the correction for intermolecular attraction, <em data-effect=\"italics\">a<\/em>, is more important than the one for molecular volume, <em data-effect=\"italics\">b<\/em>. At high pressures and small volumes, the correction for the volume of the molecules becomes important, because the molecules themselves are incompressible and constitute an appreciable fraction of the total volume. At some intermediate pressure, the two corrections have opposing influences and the gas appears to follow the relationship given by <em data-effect=\"italics\">PV = nRT<\/em> over a small range of pressures. This behavior is reflected by the \u201cdips\u201d in several of the compressibility curves shown in Figure 9.35. The attractive force between molecules initially makes the gas more compressible than an ideal gas, as pressure is raised (Z decreases with increasing <em data-effect=\"italics\">P<\/em>). At very high pressures, the gas becomes less compressible (Z increases with <em data-effect=\"italics\">P<\/em>), as the gas molecules begin to occupy an increasingly significant fraction of the total gas volume.<\/p>\n<p id=\"fs-idp87631424\">Strictly speaking, the ideal gas equation functions well when intermolecular attractions between gas molecules are negligible and the gas molecules themselves do not occupy an appreciable part of the whole volume. These criteria are satisfied under conditions of <em data-effect=\"italics\">low pressure and high temperature<\/em>. Under such conditions, the gas is said to behave ideally, and deviations from the gas laws are small enough that they may be disregarded\u2014this is, however, very often not the case.<\/p>\n<div id=\"fs-idp133812128\" data-type=\"example\">\n<div class=\"textbox shaded\">\n<h3>Example 1<\/h3>\n<h4 id=\"fs-idm26240\"><strong><span data-type=\"title\">Comparison of Ideal Gas Law and van der Waals Equation<\/span><\/strong><\/h4>\n<p>A 4.25-L flask contains 3.46 mol CO<sub>2<\/sub> at 229 \u00b0C. Calculate the pressure of this sample of CO<sub>2<\/sub>:<\/p>\n<p id=\"fs-idm66840432\">(a) from the ideal gas law<\/p>\n<p id=\"fs-idp5462416\">(b) from the van der Waals equation<\/p>\n<p id=\"fs-idm139915872\">(c) Explain the reason(s) for the difference.<\/p>\n<h4 id=\"fs-idp71956336\"><span data-type=\"title\">Solution<\/span><\/h4>\n<p>(a) From the ideal gas law:<\/p>\n<div id=\"fs-idm23230176\" data-type=\"equation\">[latex]P=\\frac{nRT}{V}=\\frac{3.46\\cancel{\\text{mol}}\\times 0.08206\\cancel{\\text{L}}\\text{atm}\\cancel{{\\text{mol}}^{\\text{-1}}}\\cancel{{\\text{K}}^{\\text{-1}}}\\times 502\\cancel{\\text{K}}}{4.25\\cancel{\\text{L}}}=33.5\\text{atm}[\/latex]<\/div>\n<p id=\"fs-idp14703728\">(b) From the van der Waals equation:<\/p>\n<div id=\"fs-idm122220784\" data-type=\"equation\">[latex]\\left(P+\\frac{{n}^{2}a}{{V}^{2}}\\right)\\times \\left(V-nb\\right)=nRT\\rightarrow P=\\frac{nRT}{\\left(V-nb\\right)}-\\frac{{n}^{2}a}{{V}^{2}}[\/latex]<\/div>\n<div id=\"fs-idp204240560\" data-type=\"equation\">[latex]P=\\frac{3.46\\text{mol}\\times 0.08206\\text{L}\\text{atm}{\\text{mol}}^{\\text{-1}}{\\text{K}}^{\\text{-1}}\\times \\text{502 K}}{\\left(4.25\\text{L}-3.46\\text{mol}\\times 0.0427\\text{L}{\\text{mol}}^{\\text{-1}}\\right)}-\\frac{{\\left(3.46\\text{mol}\\right)}^{2}\\times 3.59{\\text{L}}^{2}\\text{atm}{\\text{mol}}^{2}}{{\\left(4.25\\text{L}\\right)}^{2}}[\/latex]<\/div>\n<p id=\"fs-idp24938016\">This finally yields <em data-effect=\"italics\">P<\/em> = 32.4 atm.<\/p>\n<p id=\"fs-idp70504128\">(c) This is not very different from the value from the ideal gas law, because the pressure is not very high and the temperature is not very low. The value is somewhat different because CO<sub>2<\/sub> molecules do have some volume and attractions between molecules, and the ideal gas law assumes they do not have volume or attractions.<\/p>\n<h4 id=\"fs-idp8228960\"><strong><span data-type=\"title\">Check your Learning<\/span><\/strong><\/h4>\n<p>A 560-mL flask contains 21.3 g N<sub>2<\/sub> at 145 \u00b0C. Calculate the pressure of N<sub>2<\/sub>:<\/p>\n<p id=\"fs-idm52984064\">(a) from the ideal gas law<\/p>\n<p id=\"fs-idp68055984\">(b) from the van der Waals equation<\/p>\n<p id=\"fs-idm24430976\">(c) Explain the reason(s) for the difference.<\/p>\n<div id=\"fs-idm71592544\" data-type=\"note\">\n<div data-type=\"title\"><\/div>\n<div style=\"text-align: right;\" data-type=\"title\"><strong>Answer<\/strong>:\u00a0(a) 46.562 atm; (b) 46.594 atm; (c) The van der Waals equation takes into account the volume of the gas molecules themselves as well as intermolecular attractions.<\/div>\n<\/div>\n<\/div>\n<div class=\"bcc-box bcc-success\">\n<h2>Key Concepts and Summary<\/h2>\n<section>\n<div data-type=\"note\">\n<p id=\"fs-idp236281408\">Gas molecules possess a finite volume and experience forces of attraction for one another. Consequently, gas behavior is not necessarily described well by the ideal gas law. Under conditions of low pressure and high temperature, these factors are negligible, the ideal gas equation is an accurate description of gas behavior, and the gas is said to exhibit ideal behavior. However, at lower temperatures and higher pressures, corrections for molecular volume and molecular attractions are required to account for finite molecular size and attractive forces. The van der Waals equation is a modified version of the ideal gas law that can be used to account for the non-ideal behavior of gases under conditions.<\/p>\n<\/div>\n<\/section>\n<\/div>\n<div class=\"bcc-box bcc-success\">\n<h3>Key Equations<\/h3>\n<section>\n<div data-type=\"note\">\n<ul>\n<li>[latex]\\text{Z}=\\frac{\\text{molar}\\text{volume of gas at same}T\\text{and}P}{\\text{molar volume of ideal gas at same}T\\text{and}P}={\\left(\\frac{P\\times {V}_{m}}{R\\times T}\\right)}_{\\text{measured}}[\/latex]<\/li>\n<li>[latex]\\left(P+\\frac{{n}^{2}a}{{V}^{2}}\\right)\\times \\left(V-nb\\right)=nRT[\/latex]<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<\/div>\n<section id=\"fs-idm40478192\" class=\"summary\" data-depth=\"1\">\n<div id=\"post-355\" class=\"post-355 chapter type-chapter status-publish hentry type-1\">\n<div class=\"entry-content\">\n<div class=\"im_section\">\n<div class=\"im_section\">\n<div id=\"mclean-ch03_s01_s02_n01\" class=\"im_key_takeaways im_editable im_block\">\n<div class=\"bcc-box bcc-info\">\n<h3>Chemistry End of Chapter Exercises<\/h3>\n<section id=\"fs-idp25013184\" class=\"exercises\" data-depth=\"1\">\n<div id=\"fs-idm14870688\" data-type=\"exercise\">\n<div id=\"fs-idp141055504\" data-type=\"problem\">\n<ol>\n<li id=\"fs-idm139673280\">Graphs showing the behavior of several different gases follow. Which of these gases exhibit behavior significantly different from that expected for ideal gases?<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212116\/CNX_Chem_09_06_Exercise1_img1.jpg\" alt=\"This figure includes 6 graphs. The first, which is labeled, \u201cGas A,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cVolume.\u201d A straight blue line segment extends from the lower left to the upper right of this graph. The open area in the lower right portion of the graph contains the label, \u201cn, P constant.\u201d The second, which is labeled, \u201cGas B,\u201d has a horizontal axis labeled, \u201cP,\u201d and a vertical axis labeled, \u201cP V.\u201d A straight blue line segment extends horizontally across the center of this graph. The open area in the lower right portion of the graph contains the label, \u201cn, T constant.\u201d The third, which is labeled, \u201cGas C,\u201d has a horizontal axis labeled,\u201cP V divided by R T,\u201d and a vertical axis labeled, \u201cMoles.\u201d A blue curve begins about halfway up the vertical axis, dips slightly, then increases steadily to the upper right region of the graph. The fourth, which is labeled, \u201cGas D,\u201d has a horizontal axis labeled, \u201cP V divided by R T,\u201d and a vertical axis labeled, \u201cMoles.\u201d A straight blue line segment extends horizontally across the center of this graph. The open area in the lower right portion of the graph contains the label \u201cn, P constant.\u201d The fifth, which is labeled, \u201cGas E,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cVolume.\u201d A blue curve extends from the lower left to the upper right of this graph. The open area in the lower right portion of the graph contains the label \u201cn, P constant.\u201d The sixth graph, which is labeled, \u201cGas F,\u201d has a horizontal axis labeled, \u201cTemperature,\u201d and a vertical axis labeled, \u201cPressure.\u201d A blue curve begins toward the lower left region of the graph, increases at a rapid rate, then continues to increase at a relatively slow rate moving left to right across the graph. The open area in the lower right portion of the graph contains the label, \u201cn, V constant.\u201d\" width=\"840\" height=\"913\" data-media-type=\"image\/jpeg\" \/><\/li>\n<li>Explain why the plot of <em data-effect=\"italics\">PV<\/em> for CO<sub>2<\/sub> differs from that of an ideal gas.<img decoding=\"async\" src=\"https:\/\/s3-us-west-2.amazonaws.com\/courses-images-archive-read-only\/wp-content\/uploads\/sites\/887\/2015\/04\/23212118\/CNX_Chem_09_06_RealGases1.jpg\" alt=\"A graph is shown. The horizontal axis is labeled, \u201cP ( a t m ).\u201d Its scale is marked at 0, 1, and 2. The vertical axis is labeled, \u201cP V ( a t m L ).\u201d This scale includes markings at 0, 22.4, 22.5, and 22.6. Two curves and two lines are drawn of varying colors. One line is a horizontal, blue line extending right from about 22.42 a t m L on the vertical axis, and is labeled, \u201cIdeal gas.\u201d The remaining two curves and one line start at the same point on the vertical axis. A green line extends up and to the right slightly on the graph, reaching a value of approximately 22.46 a t m L at 2 a t m. This green line is labeled, \u201cH e.\u201d An orange curve dips below the horizontal ideal gas line initially, then increases to cross the line just past 1 a t m. This curve reaches a value of about 22.52 a t m L at 2 a t m. This curve is labeled, \u201cC H subscript 4.\u201d A purple curve dips below the horizontal ideal gas line initially, then increases to cross the line at about 0.8 a t m. This curve reaches a value of nearly 22.62 a t m L at nearly 1.2 a t m. This curve is labeled, \u201cC O subscript 2.\u201d\" data-media-type=\"image\/jpeg\" \/><\/li>\n<li>Under which of the following sets of conditions does a real gas behave most like an ideal gas, and for which conditions is a real gas expected to deviate from ideal behavior? Explain.\n<ol>\n<li>high pressure, small volume<\/li>\n<li>high temperature, low pressure<\/li>\n<li>low temperature, high pressure<\/li>\n<\/ol>\n<\/li>\n<li>Describe the factors responsible for the deviation of the behavior of real gases from that of an ideal gas.<\/li>\n<li>For which of the following gases should the correction for the molecular volume be largest: CO, CO<sub>2<\/sub>, H<sub>2<\/sub>, He, NH<sub>3<\/sub>, SF<sub>6<\/sub>?<\/li>\n<li>A 0.245-L flask contains 0.467 mol CO<sub>2<\/sub> at 159 \u00b0C. Calculate the pressure:\n<ol>\n<li>using the ideal gas law<\/li>\n<li>using the van der Waals equation<\/li>\n<li>Explain the reason for the difference.<\/li>\n<li>Identify which correction (that for P or V) is dominant and why.<\/li>\n<\/ol>\n<\/li>\n<li>Answer the following questions:\n<ol>\n<li>If XX behaved as an ideal gas, what would its graph of Z vs. P look like?<\/li>\n<li>For most of this chapter, we performed calculations treating gases as ideal. Was this justified?<\/li>\n<li>What is the effect of the volume of gas molecules on Z? Under what conditions is this effect small? When is it large? Explain using an appropriate diagram.<\/li>\n<li>What is the effect of intermolecular attractions on the value of Z? Under what conditions is this effect small? When is it large? Explain using an appropriate diagram.<\/li>\n<li>In general, under what temperature conditions would you expect Z to have the largest deviations from the Z for an ideal gas?<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<div id=\"post-355\" class=\"post-355 chapter type-chapter status-publish hentry type-1\">\n<div class=\"entry-content\">\n<div class=\"im_section\">\n<div class=\"im_section\">\n<div id=\"mclean-ch03_s01_s02_n01\" class=\"im_key_takeaways im_editable im_block\">\n<div class=\"bcc-box bcc-info\">\n<h4>Selected Answers<\/h4>\n<p>1.\u00a0Gas A: volume increases linearly as temperature increases with moles and pressure held constant, as expected by the ideal gas law <em data-effect=\"italics\">V<\/em> = (<em data-effect=\"italics\"><strong data-effect=\"bold\">nR\/P<\/strong><\/em>)<em data-effect=\"italics\">T<\/em>; Gas B: <em data-effect=\"italics\">PV<\/em> stays constant as pressure increases with moles and temperature held constant, as expected by the ideal gas law <em data-effect=\"italics\">PV<\/em> = <strong data-effect=\"bold\">n<em data-effect=\"italics\">RT<\/em><\/strong>; Gas C: compressibility factor (Z) varies as <em data-effect=\"italics\">PV<\/em>\/<em data-effect=\"italics\">RT<\/em> increases, as expected of a real gas; Gas D: compressibility factor (Z) stays constant as <em data-effect=\"italics\">PV<\/em>\/<em data-effect=\"italics\">RT<\/em> increases with moles and pressure held constant, as expected of an ideal gas; Gas E: as temperature increases, volume increases, but not linearly with moles and pressure held constant, as would <strong data-effect=\"bold\">not<\/strong> be expected by the ideal gas law <em data-effect=\"italics\">V<\/em> = (<strong data-effect=\"bold\"><em data-effect=\"italics\">nR<\/em>\/<em data-effect=\"italics\">P<\/em><\/strong>)<em data-effect=\"italics\">T,<\/em> as seen in Gas A; Gas F: as temperature increases, pressure increases with moles and volume held constant, but not linearly, as would <strong data-effect=\"bold\">not<\/strong> be expected by the ideal gas law <em data-effect=\"italics\">P<\/em> = (<strong data-effect=\"bold\"><em data-effect=\"italics\">nR<\/em>\/<em data-effect=\"italics\">V<\/em><\/strong>)<em data-effect=\"italics\">T,<\/em> as seen in Gas A; Gases C, E, and F exhibit behavior significantly different from that expected for an ideal gas.<\/p>\n<p>3.\u00a0The gas behavior most like an ideal gas will occur under the conditions in (b). Molecules have high speeds and move through greater distances between collision; they also have shorter contact times and interactions are less likely. Deviations occur with the conditions described in (a) and (c). Under conditions of (a), some gases may liquefy. Under conditions of (c), most gases will liquefy.<\/p>\n<p>5. We would expect the molecule with the largest volume to need the largest correction. SF<sub>6<\/sub> would need the largest correction.<\/p>\n<p data-type=\"newline\">7. (a) A straight horizontal line at 1.0;<\/p>\n<p data-type=\"newline\">(b) When real gases are at low pressures and high temperatures they behave close enough to ideal gases that they are approximated as such, however, in some cases, we see that at a high pressure and temperature, the ideal gas approximation breaks down and is significantly different from the pressure calculated by the van der Waals equation<\/p>\n<p data-type=\"newline\">(c) The greater the compressibility, the more the volume matters. At low pressures, the correction factor for intermolecular attractions is more significant, and the effect of the volume of the gas molecules on Z would be a small lowering compressibility. At higher pressures, the effect of the volume of the gas molecules themselves on Z would increase compressibility (see Figure 1)<\/p>\n<p data-type=\"newline\">(d) Once again, at low pressures, the effect of intermolecular attractions on Z would be more important than the correction factor for the volume of the gas molecules themselves, though perhaps still small. At higher pressures and low temperatures, the effect of intermolecular attractions would be larger. See Figure 1.<\/p>\n<p data-type=\"newline\">(e) low temperatures<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<div class=\"bcc-box bcc-success\">\n<section id=\"glossary\">\n<h3>Glossary<\/h3>\n<div data-type=\"definition\">\n<div id=\"fs-idm8143856\" data-type=\"definition\">\n<div data-type=\"glossary\">\n<p data-type=\"definition\"><strong><span data-type=\"term\">compressibility factor (Z)<br \/>\n<\/span><\/strong>ratio of the experimentally measured molar volume for a gas to its molar volume as computed from the ideal gas equation<\/p>\n<p data-type=\"definition\"><strong><span data-type=\"term\">van der Waals equation<br \/>\n<\/span><\/strong>modified version of the ideal gas equation containing additional terms to account for non-ideal gas behavior<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n\n\t\t\t <section class=\"citations-section\" role=\"contentinfo\">\n\t\t\t <h3>Candela Citations<\/h3>\n\t\t\t\t\t <div>\n\t\t\t\t\t\t <div id=\"citation-list-2120\">\n\t\t\t\t\t\t\t <div class=\"licensing\"><div class=\"license-attribution-dropdown-subheading\">CC licensed content, Shared previously<\/div><ul class=\"citation-list\"><li>Chemistry. <strong>Provided by<\/strong>: OpenStax College. <strong>Located at<\/strong>: <a target=\"_blank\" href=\"http:\/\/openstaxcollege.org\">http:\/\/openstaxcollege.org<\/a>. <strong>License<\/strong>: <em><a target=\"_blank\" rel=\"license\" href=\"https:\/\/creativecommons.org\/licenses\/by\/4.0\/\">CC BY: Attribution<\/a><\/em>. <strong>License Terms<\/strong>: Download for free at https:\/\/openstaxcollege.org\/textbooks\/chemistry\/get<\/li><\/ul><\/div>\n\t\t\t\t\t\t <\/div>\n\t\t\t\t\t <\/div>\n\t\t\t <\/section>","protected":false},"author":5,"menu_order":8,"template":"","meta":{"_candela_citation":"[{\"type\":\"cc\",\"description\":\"Chemistry\",\"author\":\"\",\"organization\":\"OpenStax College\",\"url\":\"http:\/\/openstaxcollege.org\",\"project\":\"\",\"license\":\"cc-by\",\"license_terms\":\"Download for free at https:\/\/openstaxcollege.org\/textbooks\/chemistry\/get\"}]","CANDELA_OUTCOMES_GUID":"","pb_show_title":"on","pb_short_title":"","pb_subtitle":"","pb_authors":[],"pb_section_license":""},"chapter-type":[],"contributor":[],"license":[],"class_list":["post-2120","chapter","type-chapter","status-publish","hentry"],"part":3001,"_links":{"self":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapters\/2120","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapters"}],"about":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/wp\/v2\/types\/chapter"}],"author":[{"embeddable":true,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/wp\/v2\/users\/5"}],"version-history":[{"count":11,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapters\/2120\/revisions"}],"predecessor-version":[{"id":5197,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapters\/2120\/revisions\/5197"}],"part":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/parts\/3001"}],"metadata":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapters\/2120\/metadata\/"}],"wp:attachment":[{"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/wp\/v2\/media?parent=2120"}],"wp:term":[{"taxonomy":"chapter-type","embeddable":true,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/pressbooks\/v2\/chapter-type?post=2120"},{"taxonomy":"contributor","embeddable":true,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/wp\/v2\/contributor?post=2120"},{"taxonomy":"license","embeddable":true,"href":"https:\/\/courses.lumenlearning.com\/suny-buffstate-chemistryformajorsxmaster\/wp-json\/wp\/v2\/license?post=2120"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}