17.3 Standard Reduction Potentials

Learning Objectives

By the end of this module, you will be able to:

  • Determine standard cell potentials for oxidation-reduction reactions
  • Use standard reduction potentials to determine the better oxidizing or reducing agent from among several possible choices

Figure 1. In this standard galvanic cell, the half-cells are separated; electrons can flow through an external wire and become available to do electrical work.The cell potential in Figure 1 (+0.46 V) results from the difference in the electrical potentials for each electrode. While it is impossible to determine the electrical potential of a single electrode, we can assign an electrode the value of zero and then use it as a reference. The electrode chosen as the zero is shown in Figure 2 and is called the standard hydrogen electrode (SHE). The SHE consists of 1 atm of hydrogen gas bubbled through a 1 M HCl solution, usually at room temperature. Platinum, which is chemically inert, is used as the electrode. The reduction half-reaction chosen as the reference is

[latex]2\text{H}^{+}\left(aq, 1M\right)+2\text{e}^{-}\rightleftharpoons\text{H}_{2}\left(g,1\text{ atm}\right)\,\,\,\,\,\,\,E^{\circ}=0\text{ V}[/latex]

E° is the standard reduction potential. The superscript “°” on the E denotes standard conditions (1 bar or 1 atm for gases, 1 M for solutes). The voltage is defined as zero for all temperatures.

The figure shows a beaker just over half full of a blue liquid. A glass tube is partially submerged in the liquid. Bubbles, which are labeled “H subscript 2 ( g )” are rising from the dark grey square, labeled “P t electrode” at the bottom of the tube. A curved arrow points up to the right, indicating the direction of the bubbles. A black wire which is labeled “P t wire” extends from the dark grey square up the interior of the tube through a small port at the top. A second small port extends out the top of the tube to the left. An arrow points to the port opening from the left. The base of this arrow is labeled “H subscript 2 ( g ) at 1 a t m.” A light grey arrow points to a diagram in a circle at the right that illustrates the surface of the P t electrode in a magnified view. P t atoms are illustrated as a uniform cluster of grey spheres which are labeled “P t electrode atoms.” On the grey atom surface, the label “e superscript negative” is shown 4 times in a nearly even vertical distribution to show electrons on the P t surface. A curved arrow extends from a white sphere labeled “H superscript plus” at the right of the P t atoms to the uppermost electron shown. Just below, a straight arrow extends from the P t surface to the right to a pair of linked white spheres which are labeled “H subscript 2.” A curved arrow extends from a second white sphere labeled “H superscript plus” at the right of the P t atoms to the second electron shown. A curved arrow extends from the third electron on the P t surface to the right to a white sphere labeled “H superscript plus.” Just below, an arrow points left from a pair of linked white spheres which are labeled “H subscript 2” to the P t surface. A curved arrow extends from the fourth electron on the P t surface to the right to a white sphere labeled “H superscript plus.” Beneath this atomic view is the label “Half-reaction at P t surface: 2 H superscript plus ( a q, 1 M ) plus 2 e superscript negative right pointing arrow H subscript 2 ( g, 1 a t m ).”

Figure 2. Hydrogen gas at 1 atm is bubbled through 1 M HCl solution. Platinum, which is inert to the action of the 1 M HCl, is used as the electrode. Electrons on the surface of the electrode combine with H+ in solution to produce hydrogen gas.

A galvanic cell consisting of a SHE and Cu2+/Cu half-cell can be used to determine the standard reduction potential for Cu2+ (Figure 3). In cell notation, the reaction is

[latex]\text{Pt}\left(s\right)\mid {\text{H}}_{2}\left(g,\text{1 atm}\right)\mid {\text{H}}^{\text{+}}\left(aq,1M\right)\parallel {\text{Cu}}^{2+}\left(aq,1M\right)\mid \text{Cu}\left(s\right)[/latex]

Electrons flow from the anode to the cathode. The reactions, which are reversible, are

[latex]\begin{array}{rl}\text{Anode (oxidation):}&\text{H}_{2}\left(g\right)\longrightarrow2\text{H}^{+}\left(aq\right)+2\text{e}^{-}\\ \text{Cathode (reduction):}&\text{Cu}^{2+}\left(aq\right)+2\text{e}^{-}\longrightarrow\text{Cu}\left(s\right)\\ \\ \text{Overall:}&\text{Cu}^{2+}\left(aq\right)+\text{H}_{2}\left(g\right)\longrightarrow2\text{H}^{+}\left(aq\right)+\text{Cu}\left(s\right)\end{array}[/latex]

The standard reduction potential can be determined by subtracting the standard reduction potential for the reaction occurring at the anode from the standard reduction potential for the reaction occurring at the cathode. The minus sign is necessary because oxidation is the reverse of reduction.

[latex]\begin{array}{rllll}{}{E}_{\text{cell}}^{\circ }&=&{E}_{\text{cathode}}^{\circ }-{E}_{\text{anode}}^{\circ }\\\text{+0.34 V}&=&{E}_{{\text{Cu}}^{2+}\text{/Cu}}^{\circ }-{E}_{{\text{H}}^{\text{+}}{\text{/H}}_{2}}^{\circ }\\{}&=&{E}_{{\text{Cu}}^{2+}\text{/Cu}}^{\circ }-0&=&{E}_{{\text{Cu}}^{2+}\text{/Cu}}^{\circ }\end{array}[/latex]

This figure contains a diagram of an electrochemical cell. Two beakers are shown. Each is just over half full. The beaker on the left contains a clear, colorless solution and is labeled below as “1 M H superscript plus.” The beaker on the right contains a blue solution and is labeled below as “1 M C u superscript 2 plus.” A glass tube in the shape of an inverted U connects the two beakers at the center of the diagram. The tube contents are colorless. The ends of the tubes are beneath the surface of the solutions in the beakers and a small grey plug is present at each end of the tube. The beaker on the left has a glass tube partially submersed in the liquid. Bubbles are rising from the grey square, labeled “Standard hydrogen electrode” at the bottom of the tube. A curved arrow points up to the right, indicating the direction of the bubbles. A black wire extends from the grey square up the interior of the tube through a small port at the top to a rectangle with a digital readout of “positive 0.337 V” which is labeled “Voltmeter.” A second small port extends out the top of the tube to the left. An arrow points to the port opening from the left. The base of this arrow is labeled “H subscript 2 ( g ).” The beaker on the right has an orange-brown strip that is labeled “C u strip” at the top. A wire extends from the top of this strip to the voltmeter. An arrow points toward the voltmeter from the left which is labeled “e superscript negative flow.” Similarly, an arrow points away from the voltmeter to the right. A curved arrow extends from the standard hydrogen electrode in the beaker on the left into the surrounding solution. The tip of this arrow is labeled “H plus.” An arrow points downward from the label “e superscript negative” on the C u strip in the beaker on the right. A second curved arrow extends from another “e superscript negative” label into the solution below toward the label “C u superscript 2 plus” in the solution. A third “e superscript negative” label positioned at the lower left edge of the C u strip has a curved arrow extending from it to the “C u superscript 2 plus” label in the solution. A curved arrow extends from this “C u superscript 2 plus” label to a “C u” label at the lower edge of the C u strip.

Figure 3. A galvanic cell can be used to determine the standard reduction potential of Cu2+.

Using the SHE as a reference, other standard reduction potentials can be determined. Consider the cell shown in Figure 4, where

[latex]\text{Pt}\left(s\right)\mid {\text{H}}_{2}\left(g,\text{1 atm}\right)\mid {\text{H}}^{\text{+}}\left(aq\text{, 1}M\right)\parallel {\text{Ag}}^{\text{+}}\left(aq\text{, 1}M\right)\mid \text{Ag}\left(s\right)[/latex]

Electrons flow from left to right, and the reactions are

[latex]\begin{array}{rl}{}\text{anode (oxidation):}&{\text{H}}_{2}\left(g\right)\longrightarrow {\text{2H}}^{\text{+}}\left(aq\right)+{\text{2e}}^{-}\\ \text{cathode (reduction):}&2{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{2Ag}\left(s\right)\\ \\ \text{overall:}&2{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{H}}_{2}\left(g\right)\longrightarrow {\text{2H}}^{\text{+}}\left(aq\right)+\text{2Ag}\left(s\right)\end{array}[/latex]

The standard reduction potential can be determined by subtracting the standard reduction potential for the reaction occurring at the anode from the standard reduction potential for the reaction occurring at the cathode. The minus sign is needed because oxidation is the reverse of reduction.

[latex]\begin{array}{rllll}{E}_{\text{cell}}^{\circ }&=&{E}_{\text{cathode}}^{\circ }-{E}_{\text{anode}}^{\circ }\\\text{+0.80 V}&=&{E}_{{\text{Ag}}^{\text{+}}\text{/Ag}}^{\circ }-{E}_{{\text{H}}^{\text{+}}{\text{/H}}_{2}}^{\circ }\\{}&=&{E}_{{\text{Ag}}^{\text{+}}\text{/Ag}}^{\circ }-0&=&{E}_{{\text{Ag}}^{\text{+}}\text{/Ag}}^{\circ }\end{array}[/latex]

It is important to note that the potential is not doubled for the cathode reaction.

The SHE is rather dangerous and rarely used in the laboratory. Its main significance is that it established the zero for standard reduction potentials. Once determined, standard reduction potentials can be used to determine the standard cell potential, [latex]{E}_{\text{cell}}^{\circ }[/latex], for any cell. For example, for the cell shown in Figure 1, [latex]\text{Cu}\left(s\right)\mid {\text{Cu}}^{2+}\left(aq,1M\right)\parallel {\text{Ag}}^{\text{+}}\left(aq,1M\right)\mid \text{Ag}\left(s\right)[/latex].

[latex]\begin{array}{rl}{}\text{anode (oxidation):}&\text{Cu}\left(s\right)\longrightarrow {\text{Cu}}^{2+}\left(aq\right)+{\text{2e}}^{-}\\ \text{cathode (reduction):}&2{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{2Ag}\left(s\right)\\ \\ \text{overall:}&\text{Cu}\left(s\right)+{\text{2Ag}}^{\text{+}}\left(aq\right)\longrightarrow {\text{Cu}}^{2+}\left(aq\right)+\text{2Ag}\left(s\right)\end{array}[/latex]

[latex]{E}_{\text{cell}}^{\circ }={E}_{\text{cathode}}^{\circ }-{E}_{\text{anode}}^{\circ }={E}_{{\text{Ag}}^{\text{+}}\text{/Ag}}^{\circ }-{E}_{{\text{Cu}}^{2+}\text{/Cu}}^{\circ }=\text{0.80 V}-\text{0.34 V}=0.4\text{6 V}[/latex]

Again, note that when calculating [latex]{E}_{\text{cell}}^{\circ }[/latex], standard reduction potentials always remain the same even when a half-reaction is multiplied by a factor. Standard reduction potentials for selected reduction reactions are shown in Table 1. A more complete list is provided in Standard Electrode (Half-Cell) Potentials.

This figure contains a diagram of an electrochemical cell. Two beakers are shown. Each is just over half full. The beaker on the left contains a clear, colorless solution which is labeled “H N O subscript 3 ( a q ).” The beaker on the right contains a clear, colorless solution which is labeled “A g N O subscript 3 ( a q ).” A glass tube in the shape of an inverted U connects the two beakers at the center of the diagram and is labeled “Salt bridge.” The tube contents are colorless. The ends of the tubes are beneath the surface of the solutions in the beakers and a small grey plug is present at each end of the tube. The label “2 N a superscript plus” appears on the upper right portion of the tube. A curved arrow extends from this label down and to the right. The label “2 N O subscript 3 superscript negative” appears on the upper left portion of the tube. A curved arrow extends from this label down and to the left. The beaker on the left has a glass tube partially submerged in the liquid. Bubbles are rising from the grey square, labeled “SHE anode” at the bottom of the tube. A curved arrow points up to the right. The labels “2 H superscript plus” and “2 N O subscript 3 superscript negative” appear on the liquid in the beaker. A black wire extends from the grey square up the interior of the tube through a small port at the top to a rectangle with a digital readout of “positive 0.80 V” which is labeled “Voltmeter.” A second small port extends out the top of the tube to the left. An arrow points to the port opening from the left. The base of this arrow is labeled “H subscript 2 ( g ).” The beaker on the right has a silver strip that is labeled “A g cathode.” A wire extends from the top of this strip to the voltmeter. An arrow points toward the voltmeter from the left which is labeled “e superscript negative flow.” Similarly, an arrow points away from the voltmeter to the right. The solution in the beaker on the right has the labels “N O subscript 3 superscript negative” and “A g superscript plus” on the solution. A curved arrow extends from the A g superscript plus label to the A g cathode. Below the left beaker at the bottom of the diagram is the label “Oxidation half-reaction: H subscript 2 ( g ) right pointing arrow 2 H superscript plus ( a q ) plus 2 e superscript negative.” Below the right beaker at the bottom of the diagram is the label “Reduction half-reaction: 2 A g superscript plus ( a q ) right pointing arrow 2 A g ( s ).”

Figure 4. A galvanic cell can be used to determine the standard reduction potential of Ag+. The SHE on the left is the anode and assigned a standard reduction potential of zero.

Table 1. Selected Standard Reduction Potentials at 25 °C
Half-Reaction E° (V)
[latex]{\text{F}}_{2}\left(g\right)+{\text{2e}}^{-}\longrightarrow {\text{2F}}^{-}\left(aq\right)[/latex] +2.866
[latex]{\text{PbO}}_{2}\left(s\right)+{\text{SO}}_{4}{}^{2-}\left(aq\right)+{\text{4H}}^{\text{+}}\left(aq\right)+{\text{2e}}^{-}\longrightarrow {\text{PbSO}}_{4}\left(s\right)+{\text{2H}}_{2}\text{O}\left(l\right)[/latex] +1.69
[latex]{\text{MnO}}_{4}{}^{-}\left(aq\right)+{\text{8H}}^{\text{+}}\left(aq\right)+{\text{5e}}^{-}\longrightarrow {\text{Mn}}^{2+}\left(aq\right)+{\text{4H}}_{2}\text{O}\left(l\right)[/latex] +1.507
[latex]{\text{Au}}^{3+}\left(aq\right)+{\text{3e}}^{-}\longrightarrow \text{Au}\left(s\right)[/latex] +1.498
[latex]{\text{Cl}}_{2}\left(g\right)+{\text{2e}}^{-}\longrightarrow {\text{2Cl}}^{-}\left(aq\right)[/latex] +1.35827
[latex]{\text{O}}_{2}\left(g\right)+{\text{4H}}^{\text{+}}\left(aq\right)+{\text{4e}}^{-}\longrightarrow {\text{2H}}_{2}\text{O}\left(l\right)[/latex] +1.229
[latex]{\text{Pt}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Pt}\left(s\right)[/latex] +1.20
[latex]{\text{Br}}_{2}\left(aq\right)+{\text{2e}}^{-}\longrightarrow {\text{2Br}}^{-}\left(aq\right)[/latex] +1.0873
[latex]{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{e}}^{-}\longrightarrow \text{Ag}\left(s\right)[/latex] +0.7996
[latex]{\text{Hg}}_{2}{}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{2Hg}\left(l\right)[/latex] +0.7973
[latex]{\text{Fe}}^{3+}\left(aq\right)+{\text{e}}^{-}\longrightarrow {\text{Fe}}^{2+}\left(aq\right)[/latex] +0.771
[latex]{\text{MnO}}_{4}{}^{-}\left(aq\right)+{\text{2H}}_{2}\text{O}\left(l\right)+{\text{3e}}^{-}\longrightarrow {\text{MnO}}_{2}\left(s\right)+{\text{4OH}}^{-}\left(aq\right)[/latex] +0.558
[latex]{\text{I}}_{2}\left(s\right)+{\text{2e}}^{-}\longrightarrow {\text{2I}}^{-}\left(aq\right)[/latex] +0.5355
[latex]{\text{NiO}}_{2}\left(s\right)+{\text{2H}}_{2}\text{O}\left(l\right)+{\text{2e}}^{-}\longrightarrow {\text{Ni(OH)}}_{2}\left(s\right)+{\text{2OH}}^{-}\left(aq\right)[/latex] +0.49
[latex]{\text{Cu}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Cu}\left(s\right)[/latex] +0.337
[latex]{\text{Hg}}_{2}{\text{Cl}}_{2}\left(s\right)+{\text{2e}}^{-}\longrightarrow \text{2Hg}\left(l\right)+{\text{2Cl}}^{-}\left(aq\right)[/latex] +0.26808
[latex]\text{AgCl}\left(s\right)+{\text{2e}}^{-}\longrightarrow \text{Ag}\left(s\right)+{\text{Cl}}^{-}\left(aq\right)[/latex] +0.22233
[latex]{\text{Sn}}^{4+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow {\text{Sn}}^{2+}\left(aq\right)[/latex] +0.151
[latex]{\text{2H}}^{\text{+}}\left(aq\right)+{\text{2e}}^{-}\longrightarrow {\text{H}}_{2}\left(g\right)[/latex] 0.00
[latex]{\text{Pb}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Pb}\left(s\right)[/latex] −0.126
[latex]{\text{Sn}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Sn}\left(s\right)[/latex] −0.1262
[latex]{\text{Ni}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Ni}\left(s\right)[/latex] −0.257
[latex]{\text{Co}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Co}\left(s\right)[/latex] −0.28
[latex]{\text{PbSO}}_{4}\left(s\right)+{\text{2e}}^{-}\longrightarrow \text{Pb}\left(s\right)+{\text{SO}}_{4}{}^{2-}\left(aq\right)[/latex] −0.3505
[latex]{\text{Cd}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Cd}\left(s\right)[/latex] −0.4030
[latex]{\text{Fe}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Fe}\left(s\right)[/latex] −0.447
[latex]{\text{Cr}}^{3+}\left(aq\right)+{\text{3e}}^{-}\longrightarrow \text{Cr}\left(s\right)[/latex] −0.744
[latex]{\text{Mn}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Mn}\left(s\right)[/latex] −1.185
[latex]{\text{Zn(OH)}}_{2}\left(s\right)+{\text{2e}}^{-}\longrightarrow \text{Zn}\left(s\right)+{\text{2OH}}^{-}\left(aq\right)[/latex] −1.245
[latex]{\text{Zn}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Zn}\left(s\right)[/latex] −0.7618
[latex]{\text{Al}}^{3+}\left(aq\right)+{\text{3e}}^{-}\longrightarrow \text{Al}\left(s\right)[/latex] −1.662
[latex]{\text{Mg}}^{2}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Mg}\left(s\right)[/latex] −2.372
[latex]{\text{Na}}^{\text{+}}\left(aq\right)+{\text{e}}^{-}\longrightarrow \text{Na}\left(s\right)[/latex] −2.71
[latex]{\text{Ca}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Ca}\left(s\right)[/latex] −2.868
[latex]{\text{Ba}}^{2+}\left(aq\right)+{\text{2e}}^{-}\longrightarrow \text{Ba}\left(s\right)[/latex] −2.912
[latex]{\text{K}}^{\text{+}}\left(aq\right)+{\text{e}}^{-}\longrightarrow \text{K}\left(s\right)[/latex] −2.931
[latex]{\text{Li}}^{\text{+}}\left(aq\right)+{\text{e}}^{-}\longrightarrow \text{Li}\left(s\right)[/latex] −3.04

Tables like this make it possible to determine the standard cell potential for many oxidation-reduction reactions.

Example 1: Cell Potentials from Standard Reduction Potentials

What is the standard cell potential for a galvanic cell that consists of Au3+/Au and Ni2+/Ni half-cells? Identify the oxidizing and reducing agents.

Check Your Learning

A galvanic cell consists of a Mg electrode in 1 M Mg(NO3)2 solution and a Ag electrode in 1 M AgNO3 solution. Calculate the standard cell potential at 25 °C.

Key Concepts and Summary

Assigning the potential of the standard hydrogen electrode (SHE) as zero volts allows the determination of standard reduction potentials, , for half-reactions in electrochemical cells. As the name implies, standard reduction potentials use standard states (1 bar or 1 atm for gases; 1 M for solutes, often at 298.15 K) and are written as reductions (where electrons appear on the left side of the equation). The reduction reactions are reversible, so standard cell potentials can be calculated by subtracting the standard reduction potential for the reaction at the anode from the standard reduction for the reaction at the cathode. When calculating the standard cell potential, the standard reduction potentials are not scaled by the stoichiometric coefficients in the balanced overall equation.

Key Equations

  • [latex]{E}_{\text{cell}}^{\circ }={E}_{\text{cathode}}^{\circ }-{E}_{\text{anode}}^{\circ }[/latex]

Exercises

  1. For each reaction listed, determine its standard cell potential at 25 °C and whether the reaction is spontaneous at standard conditions.
    1. [latex]\text{Mg}\left(s\right)+{\text{Ni}}^{2+}\left(aq\right)\longrightarrow {\text{Mg}}^{2+}\left(aq\right)+\text{Ni}\left(s\right)[/latex]
    2. [latex]2{\text{Ag}}^{\text{+}}\left(aq\right)+\text{Cu}\left(s\right)\longrightarrow {\text{Cu}}^{2+}\left(aq\right)+\text{2Ag}\left(s\right)[/latex]
    3. [latex]\text{Mn}\left(s\right)+{\text{Sn(NO}}_{3}{)}_{2}\left(aq\right)\longrightarrow {\text{Mn(NO}}_{3}{)}_{2}\left(aq\right)+\text{Sn}\left(s\right)[/latex]
    4. [latex]3{\text{Fe(NO}}_{3}{)}_{2}\left(aq\right)+{\text{Au(NO}}_{3}{)}_{3}\left(aq\right)\longrightarrow {\text{3Fe(NO}}_{3}{)}_{3}\left(aq\right)+\text{Au}\left(s\right)[/latex]
  2. For each reaction listed, determine its standard cell potential at 25 °C and whether the reaction is spontaneous at standard conditions.
    1. [latex]\text{Mn}\left(s\right)+{\text{Ni}}^{2+}\left(aq\right)\longrightarrow {\text{Mn}}^{2+}\left(aq\right)+\text{Ni}\left(s\right)[/latex]
    2. [latex]3{\text{Cu}}^{2+}\left(aq\right)+\text{2Al}\left(s\right)\longrightarrow {\text{2Al}}^{3+}\left(aq\right)+\text{2Cu}\left(s\right)[/latex]
    3. [latex]\text{Na}\left(s\right)+{\text{LiNO}}_{3}\left(aq\right)\longrightarrow {\text{NaNO}}_{3}\left(aq\right)+\text{Li}\left(s\right)[/latex]
    4. [latex]{\text{Ca(NO}}_{3}{)}_{2}\left(aq\right)+\text{Ba}\left(s\right)\longrightarrow {\text{Ba(NO}}_{3}{)}_{2}\left(aq\right)+\text{Ca}\left(s\right)[/latex]
  3. Determine the overall reaction and its standard cell potential at 25 °C for this reaction. Is the reaction spontaneous at standard conditions?
    [latex]\text{Cu}\left(s\right)\mid {\text{Cu}}^{2+}\left(aq\right)\parallel {\text{Au}}^{3+}\left(aq\right)\mid \text{Au}\left(s\right)[/latex]
  4. Determine the overall reaction and its standard cell potential at 25 °C for the reaction involving the galvanic cell made from a half-cell consisting of a silver electrode in 1 M silver nitrate solution and a half-cell consisting of a zinc electrode in 1 M zinc nitrate. Is the reaction spontaneous at standard conditions?
  5. Determine the overall reaction and its standard cell potential at 25 °C for the reaction involving the galvanic cell in which cadmium metal is oxidized to 1 M cadmium(II) ion and a half-cell consisting of an aluminum electrode in 1 M aluminum nitrate solution. Is the reaction spontaneous at standard conditions?
  6. Determine the overall reaction and its standard cell potential at 25 °C for these reactions. Is the reaction spontaneous at standard conditions? Assume the standard reduction for Br2(l) is the same as for Br2(aq).[latex]\text{Pt}\left(s\right)\mid {\text{H}}_{2}\left(g\right)\mid {\text{H}}^{\text{+}}\left(aq\right)\parallel {\text{Br}}_{2}\left(aq\right)\mid {\text{Br}}^{-}\left(aq\right)\mid \text{Pt}\left(s\right)[/latex]

Glossary

standard cell potential [latex]\left({E}_{\text{cell}}^{\circ }\right)[/latex]: the cell potential when all reactants and products are in their standard states (1 bar or 1 atm or gases; 1 M for solutes), usually at 298.15 K; can be calculated by subtracting the standard reduction potential for the half-reaction at the anode from the standard reduction potential for the half-reaction occurring at the cathode

standard hydrogen electrode (SHE): the electrode consists of hydrogen gas bubbling through hydrochloric acid over an inert platinum electrode whose reduction at standard conditions is assigned a value of 0 V; the reference point for standard reduction potentials

standard reduction potential (E°): the value of the reduction under standard conditions (1 bar or 1 atm for gases; 1 M for solutes) usually at 298.15 K; tabulated values used to calculate standard cell potentials