2.5 The Precise Definition of a Limit

Learning Objectives

Describe the epsilon-delta definition of a limit.
Apply the epsilon-delta definition to find the limit of a function.
Describe the epsilon-delta definitions of one-sided limits and infinite limits.
Use the epsilon-delta definition to prove the limit laws.

By now you have progressed from the very informal definition of a limit in the introduction of this chapter to the intuitive understanding of a limit. At this point, you should have a very strong intuitive sense of what the limit of a function means and how you can find it. In this section, we convert this intuitive idea of a limit into a formal definition using precise mathematical language. The formal definition of a limit is quite possibly one of the most challenging definitions you will encounter early in your study of calculus; however, it is well worth any effort you make to reconcile it with your intuitive notion of a limit. Understanding this definition is the key that opens the door to a better understanding of calculus.

Quantifying Closeness

Before stating the formal definition of a limit, we must introduce a few preliminary ideas. Recall that the distance between two points [latex]a[/latex] and [latex]b[/latex] on a number line is given by [latex]|a-b|[/latex].

The statement [latex]|f(x)-L|<\epsilon[/latex] may be interpreted as: The distance between [latex]f(x)[/latex] and [latex]L[/latex] is less than [latex]\epsilon[/latex].
The statement [latex]0<|x-a|<\delta[/latex] may be interpreted as: [latex]x\ne a[/latex] and the distance between [latex]x[/latex] and [latex]a[/latex] is less than [latex]\delta[/latex].

It is also important to look at the following equivalences for absolute value:

The statement [latex]|f(x)-L|<\epsilon[/latex] is equivalent to the statement [latex]L-\epsilon
The statement [latex]0<|x-a|<\delta[/latex] is equivalent to the statement [latex]a-\delta

With these clarifications, we can state the formal epsilon-delta definition of the limit.

Definition

Let [latex]f(x)[/latex] be defined for all [latex]x\ne a[/latex] over an open interval containing [latex]a[/latex]. Let [latex]L[/latex] be a real number. Then

[latex]\underset{x\to a}{\lim}f(x)=L[/latex]

if, for every [latex]\epsilon >0[/latex], there exists a [latex]\delta >0[/latex] such that if [latex]0<|x-a|<\delta[/latex], then [latex]|f(x)-L|<\epsilon[/latex].

This definition may seem rather complex from a mathematical point of view, but it becomes easier to understand if we break it down phrase by phrase. The statement itself involves something called a universal quantifier (for every [latex]\epsilon >0[/latex]), an existential quantifier (there exists a [latex]\delta >0[/latex]), and, last, a conditional statement (if [latex]0<|x-a|<\delta[/latex] then [latex]|f(x)-L|<\epsilon[/latex]). Let’s take a look at (Figure), which breaks down the definition and translates each part.

Translation of the Epsilon-Delta Definition of the Limit
Definition	Translation
1. For every [latex]\epsilon >0[/latex],	1. For every positive distance [latex]\epsilon[/latex] from [latex]L[/latex],
2. there exists a [latex]\delta >0[/latex],	2. There is a positive distance [latex]\delta[/latex] from [latex]a[/latex],
3. such that	3. such that
4. if [latex]0<\|x-a\|<\delta[/latex], then [latex]\|f(x)-L\|<\epsilon[/latex].	4. if [latex]x[/latex] is closer than [latex]\delta[/latex] to [latex]a[/latex] and [latex]x\ne a[/latex], then [latex]f(x)[/latex] is closer than [latex]\epsilon[/latex] to [latex]L[/latex].

We can get a better handle on this definition by looking at the definition geometrically. (Figure) shows possible values of [latex]\delta[/latex] for various choices of [latex]\epsilon >0[/latex] for a given function [latex]f(x)[/latex], a number [latex]a[/latex], and a limit [latex]L[/latex] at [latex]a[/latex]. Notice that as we choose smaller values of [latex]\epsilon[/latex] (the distance between the function and the limit), we can always find a [latex]\delta[/latex] small enough so that if we have chosen an [latex]x[/latex] value within [latex]\delta[/latex] of [latex]a[/latex], then the value of [latex]f(x)[/latex] is within [latex]\epsilon[/latex] of the limit [latex]L[/latex].

There are three graphs side by side showing possible values of delta, given successively smaller choices of epsilon. Each graph has a decreasing, concave down curve in quadrant one. Each graph has the point (a, L) marked on the curve, where L is the limit of the function at the point where x=a. On either side of L on the y axis, a distance epsilon is marked off - namely, a line is drawn through the function at y = L + epsilon and L – epsilon. As smaller values of epsilon are chosen going from graph one to graph three, smaller values of delta to the left and right of point a can be found so that if we have chosen an x value within delta of a, then the value of f(x) is within epsilon of the limit L.

Figure 1. These graphs show possible values of [latex]\delta[/latex], given successively smaller choices of [latex]\epsilon[/latex].

Visit the following applet to experiment with finding values of [latex]\delta[/latex] for selected values of [latex]\epsilon[/latex]:

The epsilon-delta definition of limit

(Figure) shows how you can use this definition to prove a statement about the limit of a specific function at a specified value.

Proving a Statement about the Limit of a Specific Function

Prove that [latex]\underset{x\to 1}{\lim}(2x+1)=3[/latex].

Show Solution

Let [latex]\epsilon >0[/latex].

The first part of the definition begins “For every [latex]\epsilon >0[/latex].” This means we must prove that whatever follows is true no matter what positive value of [latex]\epsilon[/latex] is chosen. By stating “Let [latex]\epsilon >0[/latex],” we signal our intent to do so.

Choose [latex]\delta =\frac{\epsilon}{2}[/latex].

The definition continues with “there exists a [latex]\delta >0[/latex].” The phrase “there exists” in a mathematical statement is always a signal for a scavenger hunt. In other words, we must go and find [latex]\delta[/latex]. So, where exactly did [latex]\delta =\epsilon/2[/latex] come from? There are two basic approaches to tracking down [latex]\delta[/latex]. One method is purely algebraic and the other is geometric.

We begin by tackling the problem from an algebraic point of view. Since ultimately we want [latex]|(2x+1)-3|<\epsilon[/latex], we begin by manipulating this expression: [latex]|(2x+1)-3|<\epsilon[/latex] is equivalent to [latex]|2x-2|<\epsilon[/latex], which in turn is equivalent to [latex]|2||x-1|<\epsilon[/latex]. Last, this is equivalent to [latex]|x-1|<\epsilon/2[/latex]. Thus, it would seem that [latex]\delta =\epsilon/2[/latex] is appropriate.

We may also find [latex]\delta[/latex] through geometric methods. (Figure) demonstrates how this is done.

This graph shows how to find delta geometrically. The function 2x + 1 is drawn in red from x=0 to 2. A straight line is drawn at y=3 in green, which intersects the function at (1,3). Two blues lines are drawn at 3 + epsilon and 3 – epsilon, which are graphed here between 5 and 6 and between 0 and 1, respectively. Finally, two pink lines are drawn down from the points of intersection of the function and the blue lines – the taller between 1 and 2, and the shorter between 0 and 1. Since the blue lines and the function intersect, we can solve for x. For the shorter, corresponding to the line y = 3 – epsilon, we have 3 – epsilon = 2x + 1, which simplifies to x = 1 – epsilon / 2. For the taller, corresponding to the line y = 3 + epsilon, we have 3 + epsilon = 2x + 1, which simplifies to x = 1 + epsilon / 2. Delta is the smaller of the two distances between 1 and where the pink lines intersect with the x axis. We have delta is the min of 1 + epsilon / 2 -1 and 1 – (1 – epsilon / 2), which is the min of epsilon / 2 and epsilon / 2, which is simply epsilon / 2.

Figure 2. This graph shows how we find [latex]\delta[/latex] geometrically.

Assume [latex]0<|x-1|<\delta[/latex]. When [latex]\delta[/latex] has been chosen, our goal is to show that if [latex]0<|x-1|<\delta[/latex], then [latex]|(2x+1)-3|<\epsilon[/latex]. To prove any statement of the form “If this, then that,” we begin by assuming “this” and trying to get “that.”

Thus,

[latex]\begin{array}{lllll}|(2x+1)-3| & =|2x-2| & & & \\ & =|2(x-1)| \\ & =|2||x-1| & & & \text{property of absolute values:} \, |ab|=|a||b| \\ & =2|x-1| & & & \\ & <2 \cdot \delta & & & \text{here’s where we use the assumption that} \, 0<|x-1|<\delta \\ & =2 \cdot \frac{\epsilon}{2}=\epsilon & & & \text{here’s where we use our choice of} \, \delta =\epsilon/2 \end{array}[/latex]

Analysis

In this part of the proof, we started with [latex]|(2x+1)-3|[/latex] and used our assumption [latex]0<|x-1|<\delta[/latex] in a key part of the chain of inequalities to get [latex]|(2x+1)-3|[/latex] to be less than [latex]\epsilon[/latex]. We could just as easily have manipulated the assumed inequality [latex]0<|x-1|<\delta[/latex] to arrive at [latex]|(2x+1)-3|<\epsilon[/latex] as follows:

[latex]\begin{array}{ll} 0<|x-1|<\delta & \implies |x-1|<\delta \\ & \implies -\delta

Therefore, [latex]\underset{x\to 1}{\lim}(2x+1)=3[/latex]. (Having completed the proof, we state what we have accomplished.)

After removing all the remarks, here is a final version of the proof:

Let [latex]\epsilon >0[/latex].

Choose [latex]\delta =\epsilon/2[/latex].

Assume [latex]0<|x-1|<\delta[/latex].

Thus,

[latex]\begin{array}{ll} |(2x+1)-3|& =|2x-2| \\ & =|2(x-1)| \\ & =|2||x-1| \\ & =2|x-1| \\ & <2 \cdot \delta \\ & =2 \cdot \frac{\epsilon}{2} \\ & =\epsilon \end{array}[/latex]

Therefore, [latex]\underset{x\to 1}{\lim}(2x+1)=3[/latex].

The following Problem-Solving Strategy summarizes the type of proof we worked out in (Figure).

Problem-Solving Strategy: Proving That [latex]\underset{x\to a}{\lim}f(x)=L[/latex] for a Specific Function [latex]f(x)[/latex]

Let’s begin the proof with the following statement: Let [latex]\epsilon >0[/latex].
Next, we need to obtain a value for [latex]\delta[/latex]. After we have obtained this value, we make the following statement, filling in the blank with our choice of [latex]\delta[/latex]: Choose [latex]\delta =[/latex] _______.
The next statement in the proof should be (filling in our given value for [latex]a[/latex]):
Assume [latex]0<|x-a|<\delta[/latex].
Next, based on this assumption, we need to show that [latex]|f(x)-L|<\epsilon[/latex], where [latex]f(x)[/latex] and [latex]L[/latex] are our function [latex]f(x)[/latex] and our limit [latex]L[/latex]. At some point, we need to use [latex]0<|x-a|<\delta[/latex].
We conclude our proof with the statement: Therefore, [latex]\underset{x\to a}{\lim}f(x)=L[/latex].

Proving a Statement about a Limit

Complete the proof that [latex]\underset{x\to -1}{\lim}(4x+1)=-3[/latex] by filling in the blanks.

Let _____.

Choose [latex]\delta =[/latex] ________.

Assume [latex]0<|x-\text{___}|<\delta[/latex].

Thus, [latex]|\text{________}-\text{___}| =|\text{_________}| = |\text{___}||\text{_________}| = \text{___} \, |\text{_______}| < \text{______} = \text{_______} = \epsilon[/latex].

Therefore, [latex]\underset{x \to -1}{\lim}(4x+1)=-3[/latex].

Show Solution

Complete the proof that [latex]\underset{x\to 2}{\lim}(3x-2)=4[/latex] by filling in the blanks.

Let _____.

Choose [latex]\delta =[/latex] ________.

Assume [latex]0<|x-\text{___}|<\delta[/latex].

Thus, [latex]|\text{________}-\text{___}| =|\text{_________}| = |\text{___}||\text{_________}| = \text{___} \, |\text{_______}| < \text{______} = \text{_______} = \epsilon[/latex].

Therefore, [latex]\underset{x\to 2}{\lim}(3x-2)=4[/latex].

Show Solution

Hint

Follow the outline in the Problem-Solving Strategy that we worked out in full in (Figure).

In (Figure) and (Figure), the proofs were fairly straightforward, since the functions with which we were working were linear. In (Figure), we see how to modify the proof to accommodate a nonlinear function.

Proving a Statement about the Limit of a Specific Function (Geometric Approach)

Prove that [latex]\underset{x\to 2}{\lim}x^2=4[/latex].

Solution

Let [latex]\epsilon >0[/latex]. The first part of the definition begins “For every [latex]\epsilon >0[/latex],” so we must prove that whatever follows is true no matter what positive value of [latex]\epsilon[/latex] is chosen. By stating “Let [latex]\epsilon >0[/latex],” we signal our intent to do so.
Without loss of generality, assume [latex]\epsilon \le 4[/latex]. Two questions present themselves: Why do we want [latex]\epsilon \le 4[/latex] and why is it okay to make this assumption? In answer to the first question: Later on, in the process of solving for [latex]\delta[/latex], we will discover that [latex]\delta[/latex] involves the quantity [latex]\sqrt{4-\epsilon}[/latex]. Consequently, we need [latex]\epsilon \le 4[/latex]. In answer to the second question: If we can find [latex]\delta >0[/latex] that “works” for [latex]\epsilon \le 4[/latex], then it will “work” for any [latex]\epsilon >4[/latex] as well. Keep in mind that, although it is always okay to put an upper bound on [latex]\epsilon[/latex], it is never okay to put a lower bound (other than zero) on [latex]\epsilon[/latex].
Choose [latex]\delta =\text{min}\{2-\sqrt{4-\epsilon},\sqrt{4+\epsilon}-2\}[/latex]. (Figure) shows how we made this choice of [latex]\delta[/latex].

Figure 3. This graph shows how we find [latex]\delta[/latex] geometrically for a given [latex]\epsilon[/latex] for the proof in (Figure).
We must show: If [latex]0<|x-2|<\delta[/latex], then [latex]|x^2-4|<\epsilon[/latex], so we must begin by assuming
[latex]0<|x-2|<\delta[/latex].

We don’t really need [latex]0<|x-2|[/latex] (in other words, [latex]x\ne 2[/latex]) for this proof. Since [latex]0<|x-2|<\delta \implies |x-2|<\delta[/latex], it is okay to drop [latex]0<|x-2|[/latex].
So, [latex]|x-2|<\delta[/latex], which implies [latex]-\delta

Recall that [latex]\delta =\text{min}\{2-\sqrt{4-\epsilon},\sqrt{4+\epsilon}-2\}[/latex]. Thus, [latex]\delta \le 2-\sqrt{4-\epsilon}[/latex] and consequently [latex]-(2-\sqrt{4-\epsilon})\le -\delta[/latex]. We also use [latex]\delta \le \sqrt{4+\epsilon}-2[/latex] here. We might ask at this point: Why did we substitute [latex]2-\sqrt{4-\epsilon}[/latex] for [latex]\delta[/latex] on the left-hand side of the inequality and [latex]\sqrt{4+\epsilon}-2[/latex] on the right-hand side of the inequality? If we look at (Figure), we see that [latex]2-\sqrt{4-\epsilon}[/latex] corresponds to the distance on the left of 2 on the [latex]x[/latex]-axis and [latex]\sqrt{4+\epsilon}-2[/latex] corresponds to the distance on the right. Thus,

[latex]-(2-\sqrt{4-\epsilon})\le -\delta
We simplify the expression on the left:

[latex]-2+\sqrt{4-\epsilon}
Then, we add 2 to all parts of the inequality:

[latex]\sqrt{4-\epsilon}
We square all parts of the inequality. It is okay to do so, since all parts of the inequality are positive:

[latex]4-\epsilon
We subtract 4 from all parts of the inequality:

[latex]-\epsilon
Last,

[latex]|x^2-4|<\epsilon[/latex].
Therefore,
[latex]\underset{x\to 2}{\lim}x^2=4[/latex].

Find [latex]\delta[/latex] corresponding to [latex]\epsilon >0[/latex] for a proof that [latex]\underset{x\to 9}{\lim}\sqrt{x}=3[/latex].

Show Solution

Choose [latex]\delta =\text{min}\{9-(3-\epsilon)^2,(3+\epsilon)^2-9\}[/latex].

Hint

Draw a graph similar to the one in (Figure).

The geometric approach to proving that the limit of a function takes on a specific value works quite well for some functions. Also, the insight into the formal definition of the limit that this method provides is invaluable. However, we may also approach limit proofs from a purely algebraic point of view. In many cases, an algebraic approach may not only provide us with additional insight into the definition, it may prove to be simpler as well. Furthermore, an algebraic approach is the primary tool used in proofs of statements about limits. For (Figure), we take on a purely algebraic approach.

Proving a Statement about the Limit of a Specific Function (Algebraic Approach)

Prove that [latex]\underset{x\to -1}{\lim}(x^2-2x+3)=6[/latex].

Show Solution

Therefore,

[latex]\underset{x\to -1}{\lim}(x^2-2x+3)=6[/latex].

Complete the proof that [latex]\underset{x\to 1}{\lim}x^2=1[/latex].

Let [latex]\epsilon >0[/latex]; choose [latex]\delta =\text{min}\{1,\epsilon/3\}[/latex]; assume [latex]0<|x-1|<\delta[/latex].

Since [latex]|x-1|<1[/latex], we may conclude that [latex]-1

Show Solution

Hint

Use (Figure) as a guide.

You will find that, in general, the more complex a function, the more likely it is that the algebraic approach is the easiest to apply. The algebraic approach is also more useful in proving statements about limits.

Proving Limit Laws

We now demonstrate how to use the epsilon-delta definition of a limit to construct a rigorous proof of one of the limit laws. The triangle inequality is used at a key point of the proof, so we first review this key property of absolute value.

Definition

The triangle inequality states that if [latex]a[/latex] and [latex]b[/latex] are any real numbers, then [latex]|a+b|\le |a|+|b|[/latex].

Proof

We prove the following limit law: If [latex]\underset{x\to a}{\lim}f(x)=L[/latex] and [latex]\underset{x\to a}{\lim}g(x)=M[/latex], then [latex]\underset{x\to a}{\lim}(f(x)+g(x))=L+M[/latex].

Let [latex]\epsilon >0[/latex].

Choose [latex]\delta_1>0[/latex] so that if [latex]0<|x-a|<\delta_1[/latex], then [latex]|f(x)-L|<\epsilon/2[/latex].

Choose [latex]\delta_2>0[/latex] so that if [latex]0<|x-a|<\delta_2[/latex], then [latex]|g(x)-M|<\epsilon/2[/latex].

Choose [latex]\delta =\text{min}\{\delta_1,\delta_2\}[/latex].

Assume [latex]0<|x-a|<\delta[/latex].

Thus,

[latex]0<|x-a|<\delta_1[/latex] and [latex]0<|x-a|<\delta_2[/latex].

Hence,

[latex]\begin{array}{ll} |(f(x)+g(x))-(L+M)| & =|(f(x)-L)+(g(x)-M)| \\ & \le |f(x)-L|+|g(x)-M| \\ & <\frac{\epsilon}{2}+\frac{\epsilon}{2}=\epsilon \end{array} _\blacksquare[/latex]

We now explore what it means for a limit not to exist. The limit [latex]\underset{x\to a}{\lim}f(x)[/latex] does not exist if there is no real number [latex]L[/latex] for which [latex]\underset{x\to a}{\lim}f(x)=L[/latex]. Thus, for all real numbers [latex]L[/latex], [latex]\underset{x\to a}{\lim}f(x)\ne L[/latex]. To understand what this means, we look at each part of the definition of [latex]\underset{x\to a}{\lim}f(x)=L[/latex] together with its opposite. A translation of the definition is given in (Figure).

Translation of the Definition of [latex]\underset{x\to a}{\lim}f(x)=L[/latex] and its Opposite
Definition	Opposite
1. For every [latex]\epsilon >0[/latex],	1. There exists [latex]\epsilon >0[/latex] so that
2. there exists a [latex]\delta >0[/latex] so that	2. for every [latex]\delta >0[/latex],
3. if [latex]0<\|x-a\|<\delta[/latex], then [latex]\|f(x)-L\|<\epsilon[/latex].	3. There is an [latex]x[/latex] satisfying [latex]0<\|x-a\|<\delta[/latex] so that [latex]\|f(x)-L\|\ge \epsilon[/latex].

Finally, we may state what it means for a limit not to exist. The limit [latex]\underset{x\to a}{\lim}f(x)[/latex] does not exist if for every real number [latex]L[/latex], there exists a real number [latex]\epsilon >0[/latex] so that for all [latex]\delta >0[/latex], there is an [latex]x[/latex] satisfying [latex]0<|x-a|<\delta[/latex], so that [latex]|f(x)-L|\ge \epsilon[/latex]. Let’s apply this in (Figure) to show that a limit does not exist.

Showing That a Limit Does Not Exist

Show that [latex]\underset{x\to 0}{\lim}\frac{|x|}{x}[/latex] does not exist. The graph of [latex]f(x)=\frac{|x|}{x}[/latex] is shown here:

A graph of a function with two segments. The first exists for x<0, and it is a line with no slope that ends at the y axis in an open circle at (0,-1). The second exists for x>0, and it is a line with no slope that begins at the y axis in an open circle (1,0).

Show Solution

One-Sided and Infinite Limits

Just as we first gained an intuitive understanding of limits and then moved on to a more rigorous definition of a limit, we now revisit one-sided limits. To do this, we modify the epsilon-delta definition of a limit to give formal epsilon-delta definitions for limits from the right and left at a point. These definitions only require slight modifications from the definition of the limit. In the definition of the limit from the right, the inequality [latex]0

Definition

Limit from the Right: Let [latex]f(x)[/latex] be defined over an open interval of the form [latex](a,b)[/latex] where [latex]a

[latex]\underset{x\to a^+}{\lim}f(x)=L[/latex]

if for every [latex]\epsilon >0[/latex], there exists a [latex]\delta >0[/latex] such that if [latex]0

Limit from the Left: Let [latex]f(x)[/latex] be defined over an open interval of the form [latex](b,c)[/latex] where [latex]b

[latex]\underset{x\to a^-}{\lim}f(x)=L[/latex]

if for every [latex]\epsilon >0[/latex], there exists a [latex]\delta >0[/latex] such that if [latex]-\delta

Proving a Statement about a Limit From the Right

Prove that [latex]\underset{x\to 4^+}{\lim}\sqrt{x-4}=0[/latex].

Show Solution

Find [latex]\delta[/latex] corresponding to [latex]\epsilon[/latex] for a proof that [latex]\underset{x\to 1^-}{\lim}\sqrt{1-x}=0[/latex].

Show Solution

Hint

Sketch the graph and use (Figure) as a solving guide.

We conclude the process of converting our intuitive ideas of various types of limits to rigorous formal definitions by pursuing a formal definition of infinite limits. To have [latex]\underset{x\to a}{\lim}f(x)=+\infty[/latex], we want the values of the function [latex]f(x)[/latex] to get larger and larger as [latex]x[/latex] approaches [latex]a[/latex]. Instead of the requirement that [latex]|f(x)-L|<\epsilon[/latex] for arbitrarily small [latex]\epsilon[/latex] when [latex]0<|x-a|<\delta[/latex] for small enough [latex]\delta[/latex], we want [latex]f(x)>M[/latex] for arbitrarily large positive [latex]M[/latex] when [latex]0<|x-a|<\delta[/latex] for small enough [latex]\delta[/latex]. (Figure) illustrates this idea by showing the value of [latex]\delta[/latex] for successively larger values of [latex]M[/latex].

Two graphs side by side. Each graph contains two curves above the x axis separated by an asymptote at x=a. The curves on the left go to infinity as x goes to a and to 0 as x goes to negative infinity. The curves on the right go to infinity as x goes to a and to 0 as x goes to infinity. The first graph has a value M greater than zero marked on the y axis and a horizontal line drawn from there (y=M) to intersect with both curves. Lines are drawn down from the points of intersection to the x axis. Delta is the smaller of the distances between point a and these new spots on the x axis. The same lines are drawn on the second graph, but this M is larger, and the distances from the x axis intersections to point a are smaller.

Figure 5. These graphs plot values of [latex]\delta[/latex] for [latex]M[/latex] to show that [latex]\underset{x\to a}{\lim}f(x)=+\infty[/latex].

Definition

Let [latex]f(x)[/latex] be defined for all [latex]x\ne a[/latex] in an open interval containing [latex]a[/latex]. Then, we have an infinite limit

[latex]\underset{x\to a}{\lim}f(x)=+\infty[/latex]

if for every [latex]M>0[/latex], there exists [latex]\delta >0[/latex] such that if [latex]0<|x-a|<\delta[/latex], then [latex]f(x)>M[/latex].

Let [latex]f(x)[/latex] be defined for all [latex]x\ne a[/latex] in an open interval containing [latex]a[/latex]. Then, we have a negative infinite limit

[latex]\underset{x\to a}{\lim}f(x)=−\infty[/latex]

if for every [latex]M>0[/latex], there exists [latex]\delta >0[/latex] such that if [latex]0<|x-a|<\delta[/latex], then [latex]f(x)<−M[/latex].

Key Concepts

The intuitive notion of a limit may be converted into a rigorous mathematical definition known as the epsilon-delta definition of the limit.
The epsilon-delta definition may be used to prove statements about limits.
The epsilon-delta definition of a limit may be modified to define one-sided limits.

In the following exercises, write the appropriate [latex]\epsilon[/latex]–[latex]\delta[/latex] definition for each of the given statements.

1. [latex]\underset{x\to a}{\lim}f(x)=N[/latex]

2. [latex]\underset{t\to b}{\lim}g(t)=M[/latex]

Show Solution

3. [latex]\underset{x\to c}{\lim}h(x)=L[/latex]

4. [latex]\underset{x\to a}{\lim}\phi(x)=A[/latex]

Show Solution

The following graph of the function [latex]f[/latex] satisfies [latex]\underset{x\to 2}{\lim}f(x)=2[/latex]. In the following exercises, determine a value of [latex]\delta >0[/latex] that satisfies each statement.

A function drawn in quadrant one for x > 0. It is an increasing concave up function, with points approximately (0,0), (1, .5), (2,2), and (3,4).

5. If [latex]0<|x-2|<\delta[/latex], then [latex]|f(x)-2|<1[/latex].

6. If [latex]0<|x-2|<\delta[/latex], then [latex]|f(x)-2|<0.5[/latex].

Show Solution

The following graph of the function [latex]f[/latex] satisfies [latex]\underset{x\to 3}{\lim}f(x)=-1[/latex]. In the following exercises, determine a value of [latex]\delta >0[/latex] that satisfies each statement.

A graph of a decreasing linear function, with points (0,2), (1,1), (2,0), (3,-1), (4,-2), and so on for x >= 0.

7. If [latex]0<|x-3|<\delta[/latex], then [latex]|f(x)+1|<1[/latex].

8. If [latex]0<|x-3|<\delta[/latex], then [latex]|f(x)+1|<2[/latex].

Show Solution

The following graph of the function [latex]f[/latex] satisfies [latex]\underset{x\to 3}{\lim}f(x)=2[/latex]. In the following exercises, for each value of [latex]\epsilon[/latex], find a value of [latex]\delta >0[/latex] such that the precise definition of limit holds true.

A graph of an increasing linear function intersecting the x axis at about (2.25, 0) and going through the points (3,2) and, approximately, (1,-5) and (4,5).

9. [latex]\epsilon =1.5[/latex]

10. [latex]\epsilon =3[/latex]

Show Solution

In the following exercises, use a graphing calculator to find a number [latex]\delta[/latex] such that the statements hold true.

11. [T] [latex]|\sin (2x)-\frac{1}{2}|<0.1[/latex], whenever [latex]|x-\frac{\pi}{12}|<\delta[/latex]

12. [T] [latex]|\sqrt{x-4}-2|<0.1[/latex], whenever [latex]|x-8|<\delta[/latex]

Show Solution

In the following exercises, use the precise definition of limit to prove the given limits.

13. [latex]\underset{x\to 2}{\lim}(5x+8)=18[/latex]

14. [latex]\underset{x\to 3}{\lim}\frac{x^2-9}{x-3}=6[/latex]

Show Solution

15. [latex]\underset{x\to 2}{\lim}\frac{2x^2-3x-2}{x-2}=5[/latex]

16. [latex]\underset{x\to 0}{\lim}x^4=0[/latex]

Show Solution

17. [latex]\underset{x\to 2}{\lim}(x^2+2x)=8[/latex]

In the following exercises, use the precise definition of limit to prove the given one-sided limits.

18. [latex]\underset{x\to 5^-}{\lim}\sqrt{5-x}=0[/latex]

Show Solution

19. [latex]\underset{x\to 0^+}{\lim}f(x)=-2[/latex], where [latex]f(x)=\begin{cases} 8x-3 & \text{if} \, x<0 \\ 4x-2 & \text{if} \, x \ge 0 \end{cases}[/latex].

20. [latex]\underset{x\to 1^-}{\lim}f(x)=3[/latex], where [latex]f(x)=\begin{cases} 5x-2 & \text{if} \, x < 1 \\ 7x-1 & \text{if} x \ge 1 \end{cases}[/latex]

Show Solution

In the following exercises, use the precise definition of limit to prove the given infinite limits.

21. [latex]\underset{x\to 0}{\lim}\frac{1}{x^2}=\infty[/latex]

22. [latex]\underset{x\to -1}{\lim}\frac{3}{(x+1)^2}=\infty[/latex]

Show Solution

23. [latex]\underset{x\to 2}{\lim}-\frac{1}{(x-2)^2}=−\infty[/latex]

24. An engineer is using a machine to cut a flat square of Aerogel of area 144 cm². If there is a maximum error tolerance in the area of 8 cm², how accurately must the engineer cut on the side, assuming all sides have the same length? How do these numbers relate to [latex]\delta, \, \epsilon, \, a[/latex], and [latex]L[/latex]?

Show Solution

25. Use the precise definition of limit to prove that the following limit does not exist: [latex]\underset{x\to 1}{\lim}\frac{|x-1|}{x-1}[/latex].

26. Using precise definitions of limits, prove that [latex]\underset{x\to 0}{\lim}f(x)[/latex] does not exist, given that [latex]f(x)[/latex] is the ceiling function. (Hint: Try any [latex]\delta <1[/latex].)

Show Solution

27. Using precise definitions of limits, prove that [latex]\underset{x\to 0}{\lim}f(x)[/latex] does not exist: [latex]f(x)=\begin{cases} 1 & \text{if} \, x \, \text{is rational} \\ 0 & \text{if} \, x \, \text{is irrational} \end{cases}[/latex]. (Hint: Think about how you can always choose a rational number [latex]0

28. Using precise definitions of limits, determine [latex]\underset{x\to 0}{\lim}f(x)[/latex] for [latex]f(x)=\begin{cases} x & \text{if} \, x \, \text{is rational} \\ 0 & \text{if} \, x \, \text{is irrational} \end{cases}[/latex] (Hint: Break into two cases, [latex]x[/latex] rational and [latex]x[/latex] irrational.)

Show Solution

29. Using the function from the previous exercise, use the precise definition of limits to show that [latex]\underset{x\to a}{\lim}f(x)[/latex] does not exist for [latex]a\ne 0[/latex].

For the following exercises, suppose that [latex]\underset{x\to a}{\lim}f(x)=L[/latex] and [latex]\underset{x\to a}{\lim}g(x)=M[/latex] both exist. Use the precise definition of limits to prove the following limit laws:

30. [latex]\underset{x\to a}{\lim}(f(x)-g(x))=L-M[/latex]

Show Solution

31. [latex]\underset{x\to a}{\lim}[cf(x)]=cL[/latex] for any real constant [latex]c[/latex] (Hint: Consider two cases: [latex]c=0[/latex] and [latex]c\ne 0[/latex].)

32. [latex]\underset{x\to a}{\lim}[f(x)g(x)]=LM[/latex]. (Hint: [latex]|f(x)g(x)-LM|=|f(x)g(x)-f(x)M+f(x)M-LM|\le |f(x)||g(x)-M|+|M||f(x)-L|[/latex].)

Show Solution

Glossary

epsilon-delta definition of the limit: [latex]\underset{x\to a}{\lim}f(x)=L[/latex] if for every [latex]\epsilon >0[/latex], there exists a [latex]\delta >0[/latex] such that if [latex]0<|x-a|<\delta[/latex], then [latex]|f(x)-L|<\epsilon[/latex]

triangle inequality: If [latex]a[/latex] and [latex]b[/latex] are any real numbers, then [latex]|a+b|\le |a|+|b|[/latex]

2. Limits

2.5 The Precise Definition of a Limit

Learning Objectives

Quantifying Closeness

Definition

Proving a Statement about the Limit of a Specific Function

Analysis

Problem-Solving Strategy: Proving That [latex]\underset{x\to a}{\lim}f(x)=L[/latex] for a Specific Function [latex]f(x)[/latex]

Proving a Statement about a Limit

Hint

Proving a Statement about the Limit of a Specific Function (Geometric Approach)

Hint

Proving a Statement about the Limit of a Specific Function (Algebraic Approach)

Hint

Proving Limit Laws

Definition

Proof

Showing That a Limit Does Not Exist

One-Sided and Infinite Limits

Definition

Proving a Statement about a Limit From the Right

Definition

Key Concepts

Candela Citations