A couple decides to start a college fund for their daughter. They plan to invest $50 in the fund each month. The fund pays 6% annual interest, compounded monthly. How much money will they have saved when their daughter is ready to start college in 6 years? In this section we will learn how to answer this question. To do so we need to consider the amount of money invested and the amount of interest earned.

Arithmetic Series

Using Summation Notation

To find the total amount of money in the college fund and the sum of the amounts deposited, we need to add the amounts deposited each month and the amounts earned monthly. The sum of the terms of a sequence is called a series. Consider, for example, the following series.

[latex]3+7+11+15+19+\cdots[/latex]

The [latex]n\text{th }[/latex] partial sum of a series is the sum of a finite number of consecutive terms beginning with the first term. The notation

[latex]\begin{align}&{S}_{n}\text{ represents the partial sum.} \\ &{S}_{1}=3 \\ &{S}_{2}=3+7=10 \\ &{S}_{3}=3+7+11=21 \\ &{S}_{4}=3+7+11+15=36\end{align}[/latex]

Summation notation is used to represent series. Summation notation is often known as sigma notation because it uses the Greek capital letter sigma, [latex]\Sigma[/latex], to represent the sum. Summation notation includes an explicit formula and specifies the first and last terms in the series. An explicit formula for each term of the series is given to the right of the sigma. A variable called the index of summation is written below the sigma. The index of summation is set equal to the lower limit of summation, which is the number used to generate the first term in the series. The number above the sigma, called the upper limit of summation, is the number used to generate the last term in a series.

If we interpret the given notation, we see that it asks us to find the sum of the terms in the series [latex]{a}_{k}=2k[/latex] for [latex]k=1[/latex] through [latex]k=5[/latex]. We can begin by substituting the terms for [latex]k[/latex] and listing out the terms of this series.

[latex]\begin{align} &{a}_{1}=2\left(1\right)=2 \\ &{a}_{2}=2\left(2\right)=4 \\ &{a}_{3}=2\left(3\right)=6 \\ &{a}_{4}=2\left(4\right)=8 \\ &{a}_{5}=2\left(5\right)=10 \end{align}[/latex]

We can find the sum of the series by adding the terms:

[latex]\sum\limits _{k=1}^{5}2k=2+4+6+8+10=30[/latex]

Arithmetic Series

Just as we studied special types of sequences, we will look at special types of series. Recall that an arithmetic sequence is a sequence in which the difference between any two consecutive terms is the common difference, [latex]d[/latex]. The sum of the terms of an arithmetic sequence is called an arithmetic series. We can write the sum of the first [latex]n[/latex] terms of an arithmetic series as:

[latex]{S}_{n}={a}_{1}+\left({a}_{1}+d\right)+\left({a}_{1}+2d\right)+...+\left({a}_{n}-d\right)+{a}_{n}[/latex].

We can also reverse the order of the terms and write the sum as

[latex]{S}_{n}={a}_{n}+\left({a}_{n}-d\right)+\left({a}_{n}-2d\right)+...+\left({a}_{1}+d\right)+{a}_{1}[/latex].

If we add these two expressions for the sum of the first [latex]n[/latex] terms of an arithmetic series, we can derive a formula for the sum of the first [latex]n[/latex] terms of any arithmetic series.

[latex]\begin{align}{S}_{n}&={a}_{1}+\left({a}_{1}+d\right)+\left({a}_{1}+2d\right)+...+\left({a}_{n}-d\right)+{a}_{n} \\ +{S}_{n}&={a}_{n}+\left({a}_{n}-d\right)+\left({a}_{n}-2d\right)+...+\left({a}_{1}+d\right)+{a}_{1} \\ \hline 2{S}_{n}&=\left({a}_{1}+{a}_{n}\right)+\left({a}_{1}+{a}_{n}\right)+...+\left({a}_{1}+{a}_{n}\right) \end{align}[/latex]

Because there are [latex]n[/latex] terms in the series, we can simplify this sum to

[latex]2{S}_{n}=n\left({a}_{1}+{a}_{n}\right)[/latex].

We divide by 2 to find the formula for the sum of the first [latex]n[/latex] terms of an arithmetic series.

[latex]{S}_{n}=\dfrac{n\left({a}_{1}+{a}_{n}\right)}{2}[/latex]

This is generally referred to as the Partial Sum of the series.

 

Geometric Series

Just as the sum of the terms of an arithmetic sequence is called an arithmetic series, the sum of the terms in a geometric sequence is called a geometric series. Recall that a geometric sequence is a sequence in which the ratio of any two consecutive terms is the common ratio, [latex]r[/latex]. We can write the sum of the first [latex]n[/latex] terms of a geometric series as

[latex]{S}_{n}={a}_{1}+{a}_{1}r+{a}_{1}{r}^{2}+...+{a}_{1}{r}^{n - 1}[/latex].

Just as with arithmetic series, we can do some algebraic manipulation to derive a formula for the sum of the first [latex]n[/latex] terms of a geometric series. We will begin by multiplying both sides of the equation by [latex]r[/latex].

[latex]r{S}_{n}={a}_{1}r+{a}_{1}{r}^{2}+{a}_{1}{r}^{3}+...+{a}_{1}{r}^{n}[/latex]

Next, we subtract this equation from the original equation.

[latex]\begin{align}{S}_{n}&={a}_{1}+{a}_{1}r+{a}_{1}{r}^{2}+...+{a}_{1}{r}^{n - 1} \\ -r{S}_{n}&=-\left({a}_{1}r+{a}_{1}{r}^{2}+{a}_{1}{r}^{3}+...+{a}_{1}{r}^{n}\right) \\ \hline \left(1-r\right){S}_{n}&={a}_{1}-{a}_{1}{r}^{n}\end{align}[/latex]

Notice that when we subtract, all but the first term of the top equation and the last term of the bottom equation cancel out. To obtain a formula for [latex]{S}_{n}[/latex], factor [latex]a_1[/latex] on the right hand side and divide both sides by [latex]\left(1-r\right)[/latex].

[latex]{S}_{n}=\dfrac{{a}_{1}\left(1-{r}^{n}\right)}{1-r}\text{ r}\ne \text{1}[/latex]

Using the Formula for the Sum of an Infinite Geometric Series

Thus far, we have looked only at finite series. Sometimes, however, we are interested in the sum of the terms of an infinite sequence rather than the sum of only the first n terms. An infinite series is the sum of the terms of an infinite sequence. An example of an infinite series is [latex]2+4+6+8+\dots[/latex].

This series can also be written in summation notation as [latex]\sum\limits _{k=1}^{\infty} 2k[/latex], where the upper limit of summation is infinity. Because the terms are not tending to zero, the sum of the series increases without bound as we add more terms. Therefore, the sum of this infinite series is not defined. When the sum is not a real number, we say the series diverges.

Determining Whether the Sum of an Infinite Geometric Series is Defined

If the terms of an infinite geometric series approach 0, the sum of an infinite geometric series can be defined. The terms in this series approach 0:

[latex]1+0.2+0.04+0.008+0.0016+\dots[/latex]

The common ratio is [latex]r=0.2[/latex]. As n gets large, the values of of [latex]r^n[/latex] get very small and approach 0. Each successive term affects the sum less than the preceding term. As each succeeding term gets closer to 0, the sum of the terms approaches a finite value. The terms of any infinite geometric series with [latex]-1

DETERMINING WHETHER THE SUM OF AN INFINITE GEOMETRIC SERIES IS DEFINED

The sum of an infinite series is defined if the series is geometric and [latex]-1

Finding Sums of Infinite Series

When the sum of an infinite geometric series exists, we can calculate the sum. The formula for the sum of an infinite series is related to the formula for the sum of the first n terms of a geometric series.

[latex]{S}_{n}=\dfrac{{a}_{1}\left(1-{r}^{n}\right)}{1-r}[/latex]

We will examine an infinite series with [latex]r=\frac{1}{2}[/latex]. What happens to [latex]r^n[/latex] as n increases?

[latex]\begin{align} &{\left(\frac{1}{2}\right)}^{2} = \frac{1}{4} \\&{\left(\frac{1}{2}\right)}^{3} = \frac{1}{8} \\&{\left(\frac{1}{2}\right)}^{4} = \frac{1}{16} \end{align}[/latex]

The value of [latex]r^n[/latex] decreases rapidly. What happens for greater values of n?

[latex]\begin{align} &{\left(\frac{1}{2}\right)}^{10} = \frac{1}{1\text{,}024} \\&{\left(\frac{1}{2}\right)}^{20} = \frac{1}{1\text{,}048\text{,}576} \\&{\left(\frac{1}{2}\right)}^{30} = \frac{1}{1\text{,}073\text{,}741\text{,}824} \end{align}[/latex]

As n gets large, [latex]r^n[/latex] gets very small. We say that as n increases without bound, [latex]r^n[/latex] approaches 0. As [latex]r^n[/latex] approaches 0, [latex]1-r^n[/latex] approaches 1. When this happens the numerator approaches [latex]a_1[/latex]. This gives us the formula for the sum of an infinite geometric series.

 

Annuities

At the beginning of the section, we looked at a problem in which a couple invested a set amount of money each month into a college fund for six years. An annuity is an investment in which the purchaser makes a sequence of periodic, equal payments. To find the amount of an annuity, we need to find the sum of all the payments and the interest earned. In the example the couple invests $50 each month. This is the value of the initial deposit. The account paid 6% annual interest, compounded monthly. To find the interest rate per payment period, we need to divide the 6% annual percentage interest (APR) rate by 12. So the monthly interest rate is 0.5%. We can multiply the amount in the account each month by 100.5% to find the value of the account after interest has been added.

We can find the value of the annuity right after the last deposit by using a geometric series with [latex]{a}_{1}=50[/latex] and [latex]r=100.5\%=1.005[/latex]. After the first deposit, the value of the annuity will be $50. Let us see if we can determine the amount in the college fund and the interest earned.

We can find the value of the annuity after [latex]n[/latex] deposits using the formula for the sum of the first [latex]n[/latex] terms of a geometric series. In 6 years, there are 72 months, so [latex]n=72[/latex]. We can substitute [latex]{a}_{1}=50, r=1.005,[/latex] and [latex]n=72[/latex] into the formula, and simplify to find the value of the annuity after 6 years.

[latex]{S}_{72}=\dfrac{50\left(1-{1.005}^{72}\right)}{1 - 1.005}\approx 4\text{,}320.44[/latex]

After the last deposit, the couple will have a total of $4,320.44 in the account. Notice, the couple made 72 payments of $50 each for a total of [latex]72\left(50\right) = $3,600[/latex]. This means that because of the annuity, the couple earned $720.44 interest in their college fund.

 

Key Equations

sum of the first [latex]n[/latex] terms of an arithmetic series	[latex]{S}_{n}=\dfrac{n\left({a}_{1}+{a}_{n}\right)}{2}[/latex]
sum of the first [latex]n[/latex] terms of a geometric series	[latex]{S}_{n}=\dfrac{{a}_{1}\left(1-{r}^{n}\right)}{1-r} , r\ne 1[/latex]
sum of an infinite geometric series with [latex]-1	[latex]{S}_{n}=\dfrac{{a}_{1}}{1-r}[/latex]

Key Concepts

• The sum of the terms in a sequence is called a series.
• A common notation for series is called summation notation, which uses the Greek letter sigma to represent the sum.
• The sum of the terms in an arithmetic sequence is called an arithmetic series.
• The sum of the first [latex]n[/latex] terms of an arithmetic series can be found using a formula.
• The sum of the terms in a geometric sequence is called a geometric series.
• The sum of the first [latex]n[/latex] terms of a geometric series can be found using a formula.
• The sum of an infinite series exists if the series is geometric with [latex]-1
• If the sum of an infinite series exists, it can be found using a formula.
• An annuity is an account into which the investor makes a series of regularly scheduled payments. The value of an annuity can be found using geometric series.

Glossary

annuity an investment in which the purchaser makes a sequence of periodic, equal payments

arithmetic series the sum of the terms in an arithmetic sequence

diverge a series is said to diverge if the sum is not a real number

geometric series the sum of the terms in a geometric sequence

index of summation in summation notation, the variable used in the explicit formula for the terms of a series and written below the sigma with the lower limit of summation

infinite series the sum of the terms in an infinite sequence

lower limit of summation the number used in the explicit formula to find the first term in a series

nth partial sum the sum of the first [latex]n[/latex] terms of a sequence

series the sum of the terms in a sequence

summation notation a notation for series using the Greek letter sigma; it includes an explicit formula and specifies the first and last terms in the series

upper limit of summation the number used in the explicit formula to find the last term in a series