You probably already know quite a bit about decimals based on your experience with money. Suppose you buy a sandwich and a bottle of water for lunch. If the sandwich costs [latex]\text{\$3.45}[/latex] , the bottle of water costs [latex]\text{\$1.25}[/latex] , and the total sales tax is [latex]\text{\$0.33}[/latex] , what is the total cost of your lunch?

The total is [latex]$5.03[/latex]. Suppose you pay with a [latex]$5[/latex] bill and [latex]3[/latex] pennies. Should you wait for change? No, [latex]\text{\$5}[/latex] and [latex]3[/latex] pennies is the same as [latex]\text{\$5.03}[/latex].

Because [latex]\text{100 pennies}=\text{\$1}[/latex], each penny is worth [latex]{\Large\frac{1}{100}}[/latex] of a dollar. We write the value of one penny as [latex]$0.01[/latex], since [latex]0.01={\Large\frac{1}{100}}[/latex].

Writing a number with a decimal is known as decimal notation. It is a way of showing parts of a whole when the whole is a power of ten. In other words, decimals are another way of writing fractions whose denominators are powers of ten. Just as the counting numbers are based on powers of ten, decimals are based on powers of ten. The table below shows the counting numbers.

How are decimals related to fractions? The table below shows the relation.

When we name a whole number, the name corresponds to the place value based on the powers of ten. In Whole Numbers, we learned to read [latex]10,000[/latex] as ten thousand. Likewise, the names of the decimal places correspond to their fraction values. Notice how the place value names in the first table relate to the names of the fractions from the second table.

This chart illustrates place values to the left and right of the decimal point.

Notice two important facts shown in the tables.

• The “th” at the end of the name means the number is a fraction. “One thousand” is a number larger than one, but “one thousandth” is a number smaller than one.
• The tenths place is the first place to the right of the decimal, but the tens place is two places to the left of the decimal.

Remember that [latex]$5.03[/latex] lunch? We read [latex]$5.03[/latex] as five dollars and three cents. Naming decimals (those that don’t represent money) is done in a similar way. We read the number [latex]5.03[/latex] as five and three hundredths.
We sometimes need to translate a number written in decimal notation into words. As shown in the image below, we write the amount on a check in both words and numbers.

When we write a check, we write the amount as a decimal number as well as in words. The bank looks at the check to make sure both numbers match. This helps prevent errors.

Let’s try naming a decimal, such as [latex]15.68[/latex].
We start by naming the number to the left of the decimal.	fifteen______
We use the word “and” to indicate the decimal point.	fifteen and_____
Then we name the number to the right of the decimal point as if it were a whole number.	fifteen and sixty-eight_____
Last, name the decimal place of the last digit.	fifteen and sixty-eight hundredths

The number [latex]15.68[/latex] is read fifteen and sixty-eight hundredths.

 

Now we will translate the name of a decimal number into decimal notation. We will reverse the procedure we just used.

 

In the following video we show more examples of how to write the name of a decimal using a place value chart.

The second bullet in Step 1 is needed for decimals that have no whole number part, like ‘nine thousandths’. We recognize them by the words that indicate the place value after the decimal – such as ‘tenths’ or ‘hundredths.’ Since there is no whole number, there is no ‘and.’ We start by placing a zero to the left of the decimal and continue by filling in the numbers to the right, as we did above.

 

In the next video we will show more examples of how to write a decimal given its name in words.

Before we move on to our next objective, think about money again. We know that [latex]$1[/latex] is the same as [latex]$1.00[/latex]. The way we write [latex]$1\left(\text{or}$1.00\right)[/latex] depends on the context. In the same way, integers can be written as decimals with as many zeros as needed to the right of the decimal.

[latex]\begin{array}{cccc}5=5.0\hfill & & & -2=-2.0\hfill \\ 5=5.00\hfill & & & -2=-2.00\hfill \\ 5=5.000\hfill & & & -2=-2.000\hfill \end{array}[/latex]
and so on [latex]\dots[/latex]

Converting decimals to fractions or mixed numbers

We often need to rewrite decimals as fractions or mixed numbers. Let’s go back to our lunch order to see how we can convert decimal numbers to fractions. We know that [latex]$5.03[/latex] means [latex]5[/latex] dollars and [latex]3[/latex] cents. Since there are [latex]100[/latex] cents in one dollar, [latex]3[/latex] cents means [latex]{\Large\frac{3}{100}}[/latex] of a dollar, so [latex]0.03={\Large\frac{3}{100}}[/latex].

We convert decimals to fractions by identifying the place value of the farthest right digit. In the decimal [latex]0.03[/latex], the [latex]3[/latex] is in the hundredths place, so [latex]100[/latex] is the denominator of the fraction equivalent to [latex]0.03[/latex].

[latex]0.03={\Large\frac{3}{100}}[/latex]

For our [latex]$5.03[/latex] lunch, we can write the decimal [latex]5.03[/latex] as a mixed number.

[latex]5.03=5{\Large\frac{3}{100}}[/latex]

Notice that when the number to the left of the decimal is zero, we get a proper fraction. When the number to the left of the decimal is not zero, we get a mixed number.

 

 

In the next video example, we who how to convert a decimal into a fraction.

Locating and ordering decimals with a number line

Since decimals are forms of fractions, locating decimals on the number line is similar to locating fractions on the number line.

 

 

 

In the next video we show more examples of how to locate a decimal on the number line.

Order Decimals

Which is larger, [latex]0.04[/latex] or [latex]0.40?[/latex]

If you think of this as money, you know that [latex]$0.40[/latex] (forty cents) is greater than [latex]$0.04[/latex] (four cents). So,

[latex]0.40>0.04[/latex]

In previous chapters, we used the number line to order numbers.

[latex]\begin{array}{}\\ ab\text{ , }a\text{ is greater than }b\text{ when }a\text{ is to the right of }b\text{ on the number line}\hfill \end{array}[/latex]

Where are [latex]0.04[/latex] and [latex]0.40[/latex] located on the number line?

We see that [latex]0.40[/latex] is to the right of [latex]0.04[/latex]. So we know [latex]0.40>0.04[/latex].

How does [latex]0.31[/latex] compare to [latex]0.308?[/latex] This doesn’t translate into money to make the comparison easy. But if we convert [latex]0.31[/latex] and [latex]0.308[/latex] to fractions, we can tell which is larger.

	[latex]0.31[/latex]	[latex]0.308[/latex]
Convert to fractions.	[latex]{\Large\frac{31}{100}}[/latex]	[latex]{\Large\frac{308}{1000}}[/latex]
We need a common denominator to compare them.	[latex]{\Large\frac{31\cdot\color{red}{10}}{100\cdot\color{red}{10}}}[/latex]	[latex]{\Large\frac{308}{1000}}[/latex]
	[latex]{\Large\frac{310}{1000}}[/latex]	[latex]{\Large\frac{308}{1000}}[/latex]

Because [latex]310>308[/latex], we know that [latex]{\Large\frac{310}{1000}}>{\Large\frac{308}{1000}}[/latex]. Therefore, [latex]0.31>0.308[/latex].

Notice what we did in converting [latex]0.31[/latex] to a fraction—we started with the fraction [latex]\Large\frac{31}{100}[/latex] and ended with the equivalent fraction [latex]\Large\frac{310}{1000}[/latex]. Converting [latex]\Large\frac{310}{1000}[/latex] back to a decimal gives [latex]0.310[/latex]. So [latex]0.31[/latex] is equivalent to [latex]0.310[/latex]. Writing zeros at the end of a decimal does not change its value.

[latex]{\Large\frac{31}{100}}={\Large\frac{310}{1000}}\text{ and }0.31=0.310[/latex]

If two decimals have the same value, they are said to be equivalent decimals.

[latex]0.31=0.310[/latex]

We say [latex]0.31[/latex] and [latex]0.310[/latex] are equivalent decimals.

Remember, writing zeros at the end of a decimal does not change its value.

 

 

When we order negative decimals, it is important to remember how to order negative integers. Recall that larger numbers are to the right on the number line. For example, because [latex]-2[/latex] lies to the right of [latex]-3[/latex] on the number line, we know that [latex]-2>-3[/latex]. Similarly, smaller numbers lie to the left on the number line. For example, because [latex]-9[/latex] lies to the left of [latex]-6[/latex] on the number line, we know that [latex]-9<-6[/latex].
If we zoomed in on the interval between [latex]0[/latex] and [latex]-1[/latex], we would see in the same way that [latex]-0.2>-0.3\text{and}-0.9<-0.6[/latex].

 

In the following video lesson we show how to order decimals using inequality notation by comparing place values, and by using fractions.

Rounding decimals

In the United States, gasoline prices are usually written with the decimal part as thousandths of a dollar. For example, a gas station might post the price of unleaded gas at [latex]\$3.279[/latex] per gallon. But if you were to buy exactly one gallon of gas at this price, you would pay [latex]$3.28[/latex] , because the final price would be rounded to the nearest cent. In a lesson about whole numbers, we learned that we can round numbers to get an approximate value when the exact value is not needed.

Suppose we wanted to round [latex]$2.72[/latex] to the nearest dollar. Is it closer to [latex]$2[/latex] or to [latex]$3[/latex]? What if we wanted to round [latex]$2.72[/latex] to the nearest ten cents; is it closer to [latex]$2.70[/latex] or to [latex]$2.80[/latex]? The number lines in the image below can help us answer those questions.

(a) We see that [latex]2.72[/latex] is closer to [latex]3[/latex] than to [latex]2[/latex]. So, [latex]2.72[/latex] rounded to the nearest whole number is [latex]3[/latex].

(b) We see that [latex]2.72[/latex] is closer to [latex]2.70[/latex] than [latex]2.80[/latex]. So we say that [latex]2.72[/latex] rounded to the nearest tenth is [latex]2.7[/latex].

Can we round decimals without number lines? Yes! We use a method based on the one we used to round whole numbers.