What Is Metric?

The metric system uses units such as meter, liter, and gram to measure length, liquid volume, and mass, just as the U.S. customary system uses feet, quarts, and ounces to measure these.

In addition to the difference in the basic units, the metric system is based on 10s, and different measures for length include kilometer, meter, decimeter, centimeter, and millimeter. Notice that the word meter is part of all of these units.

The metric system also applies the idea that units within the system get larger or smaller by a power of 10. This means that a meter is 100 times larger than a centimeter, and a kilogram is 1,000 times heavier than a gram. You will explore this idea a bit later. For now, notice how this idea of getting bigger or smaller by 10 is very different than the relationship between units in the U.S. customary system, where 3 feet equals 1 yard, and 16 ounces equals 1 pound.

Length, Mass, and Volume

The table below shows the basic units of the metric system. Note that the names of all metric units follow from these three basic units.

In the metric system, the basic unit of length is the meter. A meter is slightly larger than a yardstick, or just over three feet.

The basic metric unit of mass is the gram. A regular-sized paperclip has a mass of about 1 gram.

Among scientists, one gram is defined as the mass of water that would fill a 1-centimeter cube. You may notice that the word mass is used here instead of weight. In the sciences and technical fields, a distinction is made between weight and mass. Weight is a measure of the pull of gravity on an object. For this reason, an object’s weight would be different if it was weighed on Earth or on the moon because of the difference in the gravitational forces. However, the object’s mass would remain the same in both places because mass measures the amount of substance in an object. As long as you are planning on only measuring objects on Earth, you can use mass/weight fairly interchangeably, but it is worth noting that there is a difference!

Finally, the basic metric unit of volume is the liter. A liter is slightly larger than a quart.

The handle of a shovel is about 1 meter.	A paperclip weighs about 1 gram.	A medium-sized container of milk is about 1 liter.

It helps to have a mental image of how large or small some units are between the customary and metric systems. The table below shows the relationship between some common units in both systems.

Prefixes in the Metric System

The metric system is a base 10 system. This means that each successive unit is 10 times larger than the previous one.

The names of metric units are formed by adding a prefix to the basic unit of measurement. To tell how large or small a unit is, you look at the prefix. To tell whether the unit is measuring length, mass, or volume, you look at the base.

Using this table as a reference, you can see the following:

• A kilogram is 1,000 times larger than one gram (so 1 kilogram = 1,000 grams).
• A centimeter is 100 times smaller than one meter (so 1 meter = 100 centimeters).
• A dekaliter is 10 times larger than one liter (so 1 dekaliter = 10 liters).

Here is a similar table that just shows the metric units of measurement for mass, along with their size relative to 1 gram (the base unit). The common abbreviations for these metric units have been included as well.

Since the prefixes remain constant through the metric system, you could create similar charts for length and volume. The prefixes have the same meanings whether they are attached to the units of length (meter), mass (gram), or volume (liter).

Converting Units Up and Down the Metric Scale

Converting between metric units of measure requires knowledge of the metric prefixes and an understanding of the decimal system.

For instance, you can figure out how many centigrams are in one dekagram by using the table above. One dekagram is larger than one centigram, so you expect that one dekagram will equal many centigrams.

In the table, each unit is 10 times larger than the one to its immediate right. This means that 1 dekagram = 10 grams; 10 grams = 100 decigrams; and 100 decigrams = 1,000 centigrams. So, 1 dekagram = 1,000 centigrams.

Once you begin to understand the metric system, you can use a shortcut to convert among different metric units. The size of metric units increases tenfold as you go up the metric scale. The decimal system works the same way: a tenth is 10 times larger than a hundredth; a hundredth is 10 times larger than a thousandth, etc. By applying what you know about decimals to the metric system, converting among units is as simple as moving decimal points.

Here is the first problem from above: How many milligrams are in one decigram? You can recreate the order of the metric units as shown below:

[latex]\displaystyle kg\quad hg\quad dag\quad g\quad d\underbrace{g\quad c}_{1}\underbrace{g\quad m}_{2}g[/latex]

This question asks you to start with 1 decigram and convert that to milligrams. As shown above, milligrams is two places to the right of decigrams. You can just move the decimal point two places to the right to convert decigrams to milligrams: [latex]\displaystyle 1\ dg=1\underbrace{0}_{1}\underbrace{0}_{2}.\ mg[/latex].

The same method works when you are converting from a smaller to a larger unit, as in the problem: Convert 1 centimeter to kilometers.

[latex]\displaystyle k\underbrace{m\quad h}_{5}\underbrace{m\quad d}_{4}\underbrace{am\quad }_{3}\underbrace{m\quad d}_{2}\underbrace{m\quad c}_{1}m\quad mm[/latex]

Note that instead of moving to the right, you are now moving to the left —so the decimal point must do the same:

[latex]\displaystyle 1\ cm=0.\underbrace{0}_{5}\underbrace{0}_{4}\underbrace{0}_{3}\underbrace{0}_{2}\underbrace{1}_{1}\ km[/latex].

Dimensional Analysis

There is yet another method that you can use to convert metric measurements: dimensional analysis. You used this method when you were converting measurement units within the U.S. customary system.

Dimensional analysis works the same in the metric system; it relies on the use of unit fractions and the cancelling of intermediate units. The table below shows some of the unit equivalents and unit fractions for length in the metric system. (You should notice that all of the unit fractions contain a factor of 10. Remember that the metric system is based on the notion that each unit is 10 times larger than the one that came before it.)

Also, notice that two new prefixes have been added here: [latex]M[/latex] for mega- (which is very big) and [latex]\mu[/latex] for micro- (which is very small). The symbol [latex]\mu[/latex] is a greek lower-case letter pronounced mew.

When applying dimensional analysis in the metric system, be sure to check that you are not skipping over any intermediate units of measurement!

Understanding Context and Performing Conversions

Learning how to solve real-world problems using metric conversions is as important as learning how to do the conversions themselves. Mathematicians, scientists, nurses, and even athletes are often confronted with situations where they are presented with information using metric measurements, and must then make informed decisions based on that data.

The first step in solving any real-world problem is to understand its context. This will help you figure out what kinds of solutions are reasonable (and the problem itself may give you clues about what types of conversions are necessary). Here is an example.

This problem asked for the difference between two quantities. The easiest way to find this is to convert one quantity so that both quantities are measured in the same unit, and then subtract one from the other.

An example with a different context, but still requiring conversions, is shown below.