To define our trigonometric functions, we begin by drawing a unit circle, a circle centered at the origin with radius 1, as shown in Figure 2. The angle (in radians) that [latex]t[/latex] intercepts forms an arc of length [latex]s[/latex]. Using the formula [latex]s=rt[/latex], and knowing that [latex]r=1[/latex], we see that for a unit circle, [latex]s=t[/latex].

Recall that the x- and y-axes divide the coordinate plane into four quarters called quadrants. We label these quadrants to mimic the direction a positive angle would sweep. The four quadrants are labeled I, II, III, and IV.

For any angle [latex]t[/latex], we can label the intersection of the terminal side and the unit circle as by its coordinates, [latex]\left(x,y\right)[/latex]. The coordinates [latex]x[/latex] and [latex]y[/latex] will be the outputs of the trigonometric functions [latex]f\left(t\right)=\cos t[/latex] and [latex]f\left(t\right)=\sin t[/latex], respectively. This means [latex]x=\cos t[/latex] and [latex]y=\sin t[/latex].

Figure 2. Unit circle where the central angle is [latex]t[/latex] radians

Defining Sine and Cosine Functions

Now that we have our unit circle labeled, we can learn how the [latex]\left(x,y\right)[/latex] coordinates relate to the arc length and angle. The sine function relates a real number [latex]t[/latex] to the y-coordinate of the point where the corresponding angle intercepts the unit circle. More precisely, the sine of an angle [latex]t[/latex] equals the y-value of the endpoint on the unit circle of an arc of length [latex]t[/latex]. In Figure 2, the sine is equal to [latex]y[/latex]. Like all functions, the sine function has an input and an output. Its input is the measure of the angle; its output is the y-coordinate of the corresponding point on the unit circle.

The cosine function of an angle [latex]t[/latex] equals the x-value of the endpoint on the unit circle of an arc of length [latex]t[/latex]. In Figure 3, the cosine is equal to [latex]x[/latex].

Figure 3

Because it is understood that sine and cosine are functions, we do not always need to write them with parentheses: [latex]\sin t[/latex] is the same as [latex]\sin \left(t\right)[/latex] and [latex]\cos t[/latex] is the same as [latex]\cos \left(t\right)[/latex]. Likewise, [latex]{\cos }^{2}t[/latex] is a commonly used shorthand notation for [latex]{\left(\cos \left(t\right)\right)}^{2}[/latex]. Be aware that many calculators and computers do not recognize the shorthand notation. When in doubt, use the extra parentheses when entering calculations into a calculator or computer.

Example 1: Finding Function Values for Sine and Cosine

Point [latex]P[/latex] is a point on the unit circle corresponding to an angle of [latex]t[/latex], as shown in Figure 4. Find [latex]\cos \left(t\right)[/latex] and [latex]\text{sin}\left(t\right)[/latex].

Figure 4

Show Solution

We know that [latex]\cos t[/latex] is the x-coordinate of the corresponding point on the unit circle and [latex]\sin t[/latex] is the y-coordinate of the corresponding point on the unit circle. So:

[latex]\begin{align} x&=\cos t=\frac{1}{2} \\ y&=\sin t=\frac{\sqrt{3}}{2} \end{align}[/latex]

Try It

A certain angle [latex]t[/latex] corresponds to a point on the unit circle at [latex]\left(-\frac{\sqrt{2}}{2},\frac{\sqrt{2}}{2}\right)[/latex] as shown in Figure 5. Find [latex]\cos t[/latex] and [latex]\sin t[/latex].

Figure 5

Show Solution

[latex]\cos \left(t\right)=-\frac{\sqrt{2}}{2},\sin \left(t\right)=\frac{\sqrt{2}}{2}[/latex]

Finding Sines and Cosines of Angles on an Axis

For quadrantral angles, the corresponding point on the unit circle falls on the x- or y-axis. In that case, we can easily calculate cosine and sine from the values of [latex]x[/latex] and [latex]y[/latex].

Example 2: Calculating Sines and Cosines along an Axis

Find [latex]\cos \left(90^\circ \right)[/latex] and [latex]\text{sin}\left(90^\circ \right)[/latex].

Show Solution

Moving [latex]90^\circ[/latex] counterclockwise around the unit circle from the positive x-axis brings us to the top of the circle, where the [latex]\left(x,y\right)[/latex] coordinates are (0, 1), as shown in Figure 6.

Figure 6

 

Using our definitions of cosine and sine,

[latex]\begin{align}x&=\cos t=\cos \left(90^\circ \right)=0\\ y&=\sin t=\sin \left(90^\circ \right)=1\end{align}[/latex]

The cosine of 90° is 0; the sine of 90° is 1.

The Pythagorean Identity

Figure 7

Now that we can define sine and cosine, we will learn how they relate to each other and the unit circle. Recall that the equation for the unit circle is [latex]{x}^{2}+{y}^{2}=1[/latex]. Because [latex]x=\cos t[/latex] and [latex]y=\sin t[/latex], we can substitute for [latex]x[/latex] and [latex]y[/latex] to get [latex]{\cos }^{2}t+{\sin }^{2}t=1[/latex]. This equation, [latex]{\cos }^{2}t+{\sin }^{2}t=1[/latex], is known as the Pythagorean Identity.

We can use the Pythagorean Identity to find the cosine of an angle if we know the sine, or vice versa. However, because the equation yields two solutions, we need additional knowledge of the angle to choose the solution with the correct sign. If we know the quadrant where the angle is, we can easily choose the correct solution.

Example 3: Finding a Cosine from a Sine or a Sine from a Cosine

If [latex]\sin \left(t\right)=\frac{3}{7}[/latex] and [latex]t[/latex] is in the second quadrant, find [latex]\cos \left(t\right)[/latex].

Show Solution

If we drop a vertical line from the point on the unit circle corresponding to [latex]t[/latex], we create a right triangle, from which we can see that the Pythagorean Identity is simply one case of the Pythagorean Theorem. 

Figure 8

 

Substituting the known value for sine into the Pythagorean Identity,

[latex]\begin{gathered}{\cos }^{2}\left(t\right)+{\sin }^{2}\left(t\right)=1 \\ {\cos }^{2}\left(t\right)+\frac{9}{49}=1 \\ {\cos }^{2}\left(t\right)=\frac{40}{49} \\ \text{cos}\left(t\right)=\pm \sqrt{\frac{40}{49}}=\pm \frac{\sqrt{40}}{7}=\pm \frac{2\sqrt{10}}{7} \end{gathered}[/latex]

Because the angle is in the second quadrant, we know the x-value is a negative real number, so the cosine is also negative. So
[latex]\text{cos}\left(t\right)=-\frac{2\sqrt{10}}{7}\\[/latex]

Finding Sines and Cosines of Special Angles

We have already learned some properties of the special angles, such as the conversion from radians to degrees. We can also calculate sines and cosines of the special angles using the Pythagorean Identity and our knowledge of triangles.

Finding Sines and Cosines of 45° Angles

First, we will look at angles of [latex]45^\circ[/latex] or [latex]\frac{\pi }{4}[/latex], as shown in Figure 9. A [latex]45^\circ -45^\circ -90^\circ[/latex] triangle is an isosceles triangle, so the x- and y-coordinates of the corresponding point on the circle are the same. Because the x- and y-values are the same, the sine and cosine values will also be equal.

Figure 9

At [latex]t=\frac{\pi }{4}[/latex] , which is 45 degrees, the radius of the unit circle bisects the first quadrantal angle. This means the radius lies along the line [latex]y=x[/latex]. A unit circle has a radius equal to 1. So, the right triangle formed below the line [latex]y=x[/latex] has sides [latex]x[/latex] and [latex]y\text{ }\left(y=x\right)[/latex], and a radius = 1.

Figure 10

From the Pythagorean Theorem we get

Substituting [latex]y=x[/latex], we get

Combining like terms we get

And solving for [latex]x[/latex], we get

In quadrant I, [latex]x=\frac{1}{\sqrt{2}}[/latex].

At [latex]t=\frac{\pi }{4}[/latex] or 45 degrees,

If we then rationalize the denominators, we get

Therefore, the [latex]\left(x,y\right)[/latex] coordinates of a point on a circle of radius [latex]1[/latex] at an angle of [latex]45^\circ[/latex] are [latex]\left(\frac{\sqrt{2}}{2},\frac{\sqrt{2}}{2}\right)[/latex].

Finding Sines and Cosines of 30° and 60° Angles

Next, we will find the cosine and sine at an angle of [latex]30^\circ[/latex], or [latex]\frac{\pi }{6}[/latex] . First, we will draw a triangle inside a circle with one side at an angle of [latex]30^\circ[/latex], and another at an angle of [latex]-30^\circ[/latex], as shown in Figure 11. If the resulting two right triangles are combined into one large triangle, notice that all three angles of this larger triangle will be [latex]60^\circ[/latex], as shown in Figure 12.

Figure 11

Figure 12

Because all the angles are equal, the sides are also equal. The vertical line has length [latex]2y[/latex], and since the sides are all equal, we can also conclude that [latex]r=2y[/latex] or [latex]y=\frac{1}{2}r[/latex]. Since [latex]\sin t=y[/latex] ,

And since [latex]r=1[/latex] in our unit circle,

Using the Pythagorean Identity, we can find the cosine value.

The [latex]\left(x,y\right)[/latex] coordinates for the point on a circle of radius [latex]1[/latex] at an angle of [latex]30^\circ[/latex] are [latex]\left(\frac{\sqrt{3}}{2},\frac{1}{2}\right)[/latex]. At [latex]t=\frac{\pi }{3}[/latex] (60°), the radius of the unit circle, 1, serves as the hypotenuse of a 30-60-90 degree right triangle, [latex]BAD[/latex], as shown in Figure 13 below. Angle [latex]A[/latex] has measure [latex]60^\circ[/latex]. At point [latex]B[/latex], we draw an angle [latex]ABC[/latex] with measure of [latex]60^\circ[/latex]. We know the angles in a triangle sum to [latex]180^\circ[/latex], so the measure of angle [latex]C[/latex] is also [latex]60^\circ[/latex]. Now we have an equilateral triangle. Because each side of the equilateral triangle [latex]ABC[/latex] is the same length, and we know one side is the radius of the unit circle, all sides must be of length 1.

Figure 13

The measure of angle [latex]ABD[/latex] is 30°. So, if double, angle [latex]ABC[/latex] is 60°. [latex]BD[/latex] is the perpendicular bisector of [latex]AC[/latex], so it cuts [latex]AC[/latex] in half. This means that [latex]AD[/latex] is [latex]\frac{1}{2}[/latex] the radius, or [latex]\frac{1}{2}[/latex]. Notice that [latex]AD[/latex] is the x-coordinate of point [latex]B[/latex], which is at the intersection of the 60° angle and the unit circle. This gives us a triangle [latex]BAD[/latex] with hypotenuse of 1 and side [latex]x[/latex] of length [latex]\frac{1}{2}[/latex].

From the Pythagorean Theorem, we get

Substituting [latex]x=\frac{1}{2}[/latex], we get

Solving for [latex]y[/latex], we get

Since [latex]t=\frac{\pi }{3}[/latex] has the terminal side in quadrant I where the y-coordinate is positive, we choose [latex]y=\frac{\sqrt{3}}{2}\[/latex], the positive value.

At [latex]t=\frac{\pi }{3}[/latex] (60°), the [latex]\left(x,y\right)[/latex] coordinates for the point on a circle of radius [latex]1[/latex] at an angle of [latex]60^\circ[/latex] are [latex]\left(\frac{1}{2},\frac{\sqrt{3}}{2}\right)\[/latex], so we can find the sine and cosine.

We have now found the cosine and sine values for all of the most commonly encountered angles in the first quadrant of the unit circle. The table below summarizes these values.

Figure 14 shows the common angles in the first quadrant of the unit circle.

Figure 14

Using a Calculator to Find Sine and Cosine

To find the cosine and sine of angles other than the special angles, we turn to a computer or calculator. Be aware: Most calculators can be set into “degree” or “radian” mode, which tells the calculator the units for the input value. When we evaluate [latex]\cos \left(30\right)[/latex] on our calculator, it will evaluate it as the cosine of 30 degrees if the calculator is in degree mode, or the cosine of 30 radians if the calculator is in radian mode.

Identifying the Domain and Range of Sine and Cosine Functions

Now that we can find the sine and cosine of an angle, we need to discuss their domains and ranges. What are the domains of the sine and cosine functions? That is, what are the smallest and largest numbers that can be inputs of the functions? Because angles smaller than 0 and angles larger than [latex]2\pi[/latex] can still be graphed on the unit circle and have real values of [latex]x,y[/latex], and [latex]r[/latex], there is no lower or upper limit to the angles that can be inputs to the sine and cosine functions. The input to the sine and cosine functions is the rotation from the positive x-axis, and that may be any real number. In interval notation the domain of sine and cosine would be defined as [latex]\left(-\infty,\infty\right)[/latex] .

What are the ranges of the sine and cosine functions? What are the least and greatest possible values for their output? We can see the answers by examining the unit circle, as shown in Figure 15. The bounds of the x-coordinate are [latex]\left[-1,1\right][/latex]. The bounds of the y-coordinate are also [latex]\left[-1,1\right][/latex]. Therefore, the range of both the sine and cosine functions is [latex]\left[-1,1\right][/latex].

Figure 15

We have discussed finding the sine and cosine for angles in the first quadrant, but what if our angle is in another quadrant? For any given angle in the first quadrant, there is an angle in the second quadrant with the same sine value. Because the sine value is the y-coordinate on the unit circle, the other angle with the same sine will share the same y-value, but have the opposite x-value. Therefore, its cosine value will be the opposite of the first angle’s cosine value.

Likewise, there will be an angle in the fourth quadrant with the same cosine as the original angle. The angle with the same cosine will share the same x-value but will have the opposite y-value. Therefore, its sine value will be the opposite of the original angle’s sine value.

As shown in Figure 16, angle [latex]\alpha[/latex] has the same sine value as angle [latex]t[/latex]; the cosine values are opposites. Angle [latex]\beta[/latex] has the same cosine value as angle [latex]t[/latex]; the sine values are opposites.

[latex]\begin{array}{ccc}\sin \left(t\right)=\sin \left(\alpha \right)\hfill & \text{and}\hfill & \cos \left(t\right)=-\cos \left(\alpha \right)\hfill \\ \sin \left(t\right)=-\sin \left(\beta \right)\hfill & \text{and}\hfill & \cos \left(t\right)=\cos \left(\beta \right)\hfill \end{array}[/latex]

Figure 16

Recall that an angle’s reference angle is the acute angle, [latex]t[/latex], formed by the terminal side of the angle [latex]t[/latex] and the horizontal axis. A reference angle is always an angle between [latex]0[/latex] and [latex]90^\circ[/latex], or [latex]0[/latex] and [latex]\frac{\pi }{2}[/latex] radians. As we can see from Figure 17, for any angle in quadrants II, III, or IV, there is a reference angle in quadrant I.

Figure 17

Example 5: Finding a Reference Angle

Find the reference angle of [latex]225^\circ[/latex] as shown in Figure 18.

Figure 18

Show Solution

Because [latex]225^\circ[/latex] is in the third quadrant, the reference angle is

[latex]|\left(180^\circ -225^\circ \right)|=|-45^\circ |=45^\circ[/latex]

Using Reference Angles

Now let’s take a moment to reconsider the Ferris wheel introduced at the beginning of this section. Suppose a rider snaps a photograph while stopped twenty feet above ground level. The rider then rotates three-quarters of the way around the circle. What is the rider’s new elevation? To answer questions such as this one, we need to evaluate the sine or cosine functions at angles that are greater than 90 degrees or at a negative angle. Reference angles make it possible to evaluate trigonometric functions for angles outside the first quadrant. They can also be used to find [latex]\left(x,y\right)[/latex] coordinates for those angles. We will use the reference angle of the angle of rotation combined with the quadrant in which the terminal side of the angle lies.

Using Reference Angles to Evaluate Trigonometric Functions

We can find the cosine and sine of any angle in any quadrant if we know the cosine or sine of its reference angle. The absolute values of the cosine and sine of an angle are the same as those of the reference angle. The sign depends on the quadrant of the original angle. The cosine will be positive or negative depending on the sign of the x-values in that quadrant. The sine will be positive or negative depending on the sign of the y-values in that quadrant.

Using Reference Angles to Find Coordinates

Now that we have learned how to find the cosine and sine values for special angles in the first quadrant, we can use symmetry and reference angles to fill in cosine and sine values for the rest of the special angles on the unit circle. They are shown in Figure 19. Take time to learn the [latex]\left(x,y\right)[/latex] coordinates of all of the major angles in the first quadrant.

In addition to learning the values for special angles, we can use reference angles to find [latex]\left(x,y\right)[/latex] coordinates of any point on the unit circle, using what we know of reference angles along with the identities

First we find the reference angle corresponding to the given angle. Then we take the sine and cosine values of the reference angle, and give them the signs corresponding to the y– and x-values of the quadrant.

Key Equations