Graphing Points on a Coordinate Plane

Learning outcome

  • Graph points (ordered pairs) on a coordinate plane

Many maps, such as the Campus Map shown below, use a grid system to identify locations. Do you see the numbers [latex]1,2,3[/latex], and [latex]4[/latex] across the top and bottom of the map and the letters A, B, C, and D along the sides? Every location on the map can be identified by a number and a letter.

For example, the Student Center is in section 2B. It is located in the grid section above the number [latex]2[/latex] and next to the letter B. In which grid section is the Stadium? The Stadium is in section 4D.

The figure shows a labeled grid representing the Campus Map. The columns are labeled 1 through 4 and the rows are labeled A through D. At position A-1 is the title Parking Garage. At position A-4 is a rectangle labeled Residence Halls. At position B-2 is a rectangle labeled Student Center. At position B-3 is a rectangle labeled Engineering Building. At position C-1 is a rectangle labeled Taylor Hall. At position C-2 is a rectangle labeled Library. At position C-4 is a rectangle labeled Tiger Field. At position D-4 is a rectangle labeled Stadium.

example

Use the map above.

  1. Find the grid section of the Residence Halls.
  2. What is located in grid section 4C?

Solution

  1. Read the number below the Residence Halls, [latex]4[/latex], and the letter to the side, A. So the Residence Halls are in grid section 4A.
  2. Find [latex]4[/latex] across the bottom of the map and C along the side. Look below the [latex]4[/latex] and next to the C. Tiger Field is in grid section 4C.

try it

Just as maps use a grid system to identify locations, a grid system is used in algebra to show a relationship between two variables in a rectangular coordinate system. To create a rectangular coordinate system, start with a horizontal number line. Show both positive and negative numbers as you did before, using a convenient scale unit. This horizontal number line is called the [latex]x[/latex]-axis.

The figure shows a number line with integer values labeled from -5 to 5.
Now, make a vertical number line passing through the [latex]x[/latex]-axis at [latex]0[/latex]. Put the positive numbers above [latex]0[/latex] and the negative numbers below [latex]0[/latex]. See the image below. This vertical line is called the[latex]y[/latex]-axis.

Vertical grid lines pass through the integers marked on the [latex]x[/latex]-axis. Horizontal grid lines pass through the integers marked on the [latex]y[/latex]-axis]. The resulting grid is the rectangular coordinate system.

The rectangular coordinate system is also called the [latex]x\text{-}y[/latex] plane, the coordinate plane, or the Cartesian coordinate system (since it was developed by a mathematician named René Descartes.)

The rectangular coordinate system

The graph shows the x y-coordinate plane. The x and y-axis each run from -7 to 7. An arrow points to the horizontal axis with the label x-axis. An arrow points to the vertical axis with the label y-axis.

The [latex]x[/latex]-axis] and the [latex]y[/latex]-axis form the rectangular coordinate system. These axes divide a plane into four areas, called quadrants. The quadrants are identified by Roman numerals, beginning on the upper right and proceeding counterclockwise. See the image below.

The four quadrants of the rectangular coordinate system

The graph shows the x y-coordinate plane. The x and y-axis each run from -7 to 7. The top-right portion of the plane is labeled I. The top-left portion of the place is labeled II. The bottom-left portion of the table is labeled III. The bottom-right portion of the table is labeled IV.

In the rectangular coordinate system, every point is represented by an ordered pair. The first number in the ordered pair is the x-coordinate of the point, and the second number is the y-coordinate of the point.

Ordered Pair

An ordered pair, [latex]\left(x,y\right)[/latex] gives the coordinates of a point in a rectangular coordinate system.

[latex]\begin{array}{c}\text{The first number is the }x\text{-coordinate}.\hfill \\ \text{The second number is the }y\text{-coordinate}.\hfill \end{array}[/latex]

The ordered pair x y is labeled with the first coordinate x labeled as x-coordinate and the second coordinate y labeled y-coordinate.

So how do the coordinates of a point help you locate a point on the [latex]x\text{-}y[/latex] plane?

Let’s try locating the point [latex]\left(2,5\right)[/latex] . In this ordered pair, the [latex]x[/latex] -coordinate is [latex]2[/latex] and the [latex]y[/latex] -coordinate is [latex]5[/latex] .

We start by locating the [latex]x[/latex] value, [latex]2[/latex], on the [latex]x\text{-axis.}[/latex] Then we lightly sketch a vertical line through [latex]x=2[/latex], as shown in the image below.

The graph shows the x y-coordinate plane. The x and y-axis each run from -6 to 6. There is a vertical dotted line passing through 2 on the x-axis.
Now we locate the [latex]y[/latex] value, [latex]5[/latex], on the [latex]y[/latex] -axis and sketch a horizontal line through [latex]y=5[/latex] . The point where these two lines meet is the point with coordinates [latex]\left(2,5\right)[/latex]. We plot the point there, as shown in the image below.

The graph shows the x y-coordinate plane. The x and y-axis each run from -6 to 6. The point (2, 5) is labeled, and dashed vertical and horizontal lines run through this point.

example

Plot [latex]\left(1,3\right)[/latex] and [latex]\left(3,1\right)[/latex] in the same rectangular coordinate system.

try it

Exercises

Plot each point in the rectangular coordinate system and identify the quadrant in which the point is located:

1. [latex]\left(-1,3\right)[/latex]
2. [latex]\left(-3,-4\right)[/latex]
3. [latex]\left(2,-3\right)[/latex]
4. [latex]\left(3,{\Large\frac{5}{2}}\right)[/latex]

try it

example

How do the signs affect the location of the points?

Plot each point:

1. [latex]\left(-5,2\right)[/latex]
2. [latex]\left(-5,-2\right)[/latex]
3. [latex]\left(5,2\right)[/latex]
4. [latex]\left(5,-2\right)[/latex]

try it

You may have noticed some patterns as you graphed the points in the two previous examples. We can summarize sign patterns of the quadrants as follows. Also see the graph below.

Quadrant I Quadrant II Quadrant III Quadrant IV
(x,y) (x,y) (x,y) (x,y)
(+,+) (−,+) (−,−) (+,−)

The graph shows the x y-coordinate plane. The x and y-axis each run from -7 to 7. The top-right portion of the plane is labeled I with (+, +). The top-left portion of the place is labeled II with (-,+). The bottom-left portion of the table is labeled III with (-,-). The bottom-right portion of the table is labeled IV with (+,-).
What if one coordinate is zero? Where is the point [latex]\left(0,4\right)[/latex] located? Where is the point [latex]\left(-2,0\right)[/latex] located? The point [latex]\left(0,4\right)[/latex] is on the [latex]y[/latex]-axis and the point [latex]\left(-2,0\right)[/latex] is on the [latex]x[/latex]-axis.

Points on the Axes

Points with a [latex]y\text{-coordinate}[/latex] equal to [latex]0[/latex] are on the [latex]x[/latex]-axis, and have coordinates [latex]\left(a,0\right)[/latex].

Points with an [latex]x\text{-coordinate}[/latex] equal to [latex]0[/latex] are on the [latex]y[/latex]-axis, and have coordinates [latex]\left(0,b\right)[/latex].

What is the ordered pair of the point where the axes cross? At that point both coordinates are zero, so its ordered pair is [latex]\left(0,0\right)[/latex] . The point has a special name. It is called the origin.

The Origin

The point [latex]\left(0,0\right)[/latex] is called the origin. It is the point where the [latex]x[/latex]-axis and [latex]y[/latex]-axis intersect.

ExAMPLE

Plot each point on a coordinate grid:

1. [latex]\left(0,5\right)[/latex]
2. [latex]\left(4,0\right)[/latex]
3. [latex]\left(-3,0\right)[/latex]
4. [latex]\left(0,0\right)[/latex]
5. [latex]\left(0,-1\right)[/latex]

TRY IT

In the following video, we show another example of how to plot several different points on the coordinate plane.

In data and graph analysis, being able to identify the coordinates of a point shown on a graph is just as important as being able to plot points. To identify the [latex]x[/latex]-coordinate of a point on a graph, read the number on the [latex]x[/latex]-axis directly above or below the point. To identify the [latex]y[/latex]-coordinate of a point, read the number on the [latex]y[/latex]-axis directly to the left or right of the point. Remember, to write the ordered pair using the correct order [latex]\left(x,y\right)[/latex].

example

Name the ordered pair of each point shown:

The graph shows the x y-coordinate plane. The x and y-axis each run from -7 to 7. The point (negative 3, 3) is labeled A. The point (negative 1, negative 3) is labeled B. The point (2, 4) is labaled C. The point (4, negative 4) is labeled D.

Solution
Point A is above [latex]-3[/latex] on the [latex]x\text{-axis}[/latex], so the [latex]x\text{-coordinate}[/latex] of the point is [latex]-3[/latex]. The point is to the left of [latex]3[/latex] on the [latex]y\text{-axis}[/latex], so the [latex]y\text{-coordinate}[/latex] of the point is [latex]3[/latex]. The coordinates of the point are [latex]\left(-3,3\right)[/latex].

Point B is below [latex]-1[/latex] on the [latex]x\text{-axis}[/latex], so the [latex]x\text{-coordinate}[/latex] of the point is [latex]-1[/latex]. The point is to the left of [latex]-3[/latex] on the [latex]y\text{-axis}[/latex], so the [latex]y\text{-coordinate}[/latex] of the point is [latex]-3[/latex]. The coordinates of the point are [latex]\left(-1,-3\right)[/latex].

Point C is above [latex]2[/latex] on the [latex]x\text{-axis}[/latex], so the [latex]x\text{-coordinate}[/latex] of the point is [latex]2[/latex]. The point is to the right of [latex]4[/latex] on the [latex]y\text{-axis}[/latex], so the [latex]y\text{-coordinate}[/latex] of the point is [latex]4[/latex]. The coordinates of the point are [latex]\left(2,4\right)[/latex].

Point D is below [latex]4[/latex] on the [latex]x-\text{axis}[/latex], so the [latex]x\text{-coordinate}[/latex] of the point is [latex]4[/latex]. The point is to the right of [latex]-4[/latex] on the [latex]y\text{-axis}[/latex], so the [latex]y\text{-coordinate}[/latex] of the point is [latex]-4[/latex]. The coordinates of the point are [latex]\left(4,-4\right)[/latex].

try it

example

Name the ordered pair of each point shown:

The graph shows the x y-coordinate plane. The x and y-axis each run from -7 to 7. The point (negative 4, 0) is labeled A. The point (0, negative 2) is labeled B. The point (3, 0) is labaled C. The point (0, 1) is labeled D.

try it

Watch the following video for another example of how to determine the ordered pair for points on the coordinate plane.